Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Step-down module, USB, 6-24V to 5V, 3A
Synchronous buck converter with USB-A female output, steps down 6-24VDC to stable 5V for powering and charging mobile devices. Provides up to 2.1A constant and 3A peak, has high efficiency up to 97.5% and low ripple for clean voltage. Quickly connects on + and - pads, ideal for DIY powerbank, car, batteries or solar panels.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Synchronous voltage lowering module (buck converter), with USB-A Female plug, capable of lowering voltages in the 6-24VDC range to a fixed voltage of 5V with an output current of 3A.
The module is ideal for making a DIY Powerbank used to charge mobile devices.
The current of 3A can be reached for a short period of time, this module normally offers a constant output current of up to 2.1A.
Specifications:
Supply voltage: 6 - 24VDC
Output voltage: 5VDC
Maximum output current: 3A
Rated output current: 2.1A
Frequency: 500KHz
Conversion efficiency: 97.5%
Output Ripple (Fluctuations): 10mV approx
Output protection: Overvoltage
Quiescent current: 0.85mA
Dynamic response: 5% 200uS
Dimensions mm: 26 x 15 x 7mm
Use:
The product is easy to use, presenting two pads for connecting the power supply (Positive and Negative). The power supply will be made with any voltage between 6 and 24 VDC (it can be Lithium or Lead batteries used in cars, or even solar panels).
- tension
- AD
- Supply Voltage
- 6
- Maximum Input Voltage
- 24
- Minimum Output Voltage
- 5
- Maximum Output Voltage
- 5
- Source Type
- descend
- Current Adjustment
- Not
- Voltage Adjustment
- Not
- Adjustment Type
- Fixed
- Maximum Output Current
- 3
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
