Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
OLED display module, RGB, 1.5 inch, 65K colors, 6-bit, 128x128, SPI, 3.3-5V
1.5 inch RGB OLED display for embedded and IoT projects, offers clear images at 128x128 and up to 65K colors for compact graphic interfaces. It connects quickly via SPI with 3-wire or 4-wire support, operates at 3.3-5V and has low consumption, being compatible with Arduino, Raspberry Pi and STM32.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The 1.5-inch OLED RGB display module, compatible with Arduino and other development boards, is a compact and versatile display that offers a vibrant and high-quality visual experience. It is equipped with a 1.5-inch OLED screen, 128x128 pixel resolution, capable of displaying 6 bits (64 intensity levels) and up to 65,000 colors. The display is optimized to provide clear, detailed images and vivid colors.
The module has an SPI (Serial Peripheral Interface) communication interface, which facilitates connection to a variety of hardware platforms, such as Arduino, Raspberry Pi and STM32. This allows the fast and efficient transfer of data between the host device and the display, ensuring a fast and accurate representation of the displayed information.
It supports SPI communication on 3 wires (3-Wire SPI) and on 4 wires (4-Wire SPI).
Specifications:
Working voltage: 3.3V - 5VDC
Consumption in operation: in general, below 100 mA
Screen size: 1.5 inches (diagonal)
Display Type: OLED
Resolution: 128x128 pixels
Pixel size: 0.045x0.194mm
Number of colors: 65,000 (16-bit)
Display: 6-bit RGB display for each primary color (red, green, blue)
Driver IC: 1351
Interface: SPI (Serial Peripheral Interface)
SPI pins: SCLK (clock line), MOSI (data line), CS (chip select line), D/C (command/data line)
Compatibility: Arduino, Raspberry Pi and STM32, but can also be used with other hardware platforms.
Additional features:
Backlight control
Fast response time and blur-free display
The 1.5-inch OLED RGB display module is ideal for projects that require a colorful and detailed display in a small space. It can be used in various applications, such as rapid prototyping, measuring devices, IoT (Internet of Things), games, watches and many others.
Use:
Detailed information and support can be found on the manufacturer's website (Waveshare): https://www.waveshare.com/1.5inch-rgb-oled-module.htm
Pin information:
VDC Power (3.3V/5V input)
GND Ground
FROM Data input
CLK Clock input
CS Chip selection, low active
AD 4-wire SPI: Data/Command selection (high for data, low for command)
3-wire SPI: connect to GND, keeping low level
RS Reset, low active
Login:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
