DM556 digital stepper driver 20-50V 5.6A
Digital stepper motor driver, DM556, 2 phases, 20-50V, 0.5-5.6A
In Stoc
Digital driver for 2-phase stepper motors, ideal in automation with Nema17 and Nema23, offers smooth and precise movement through configurable microstepping, reduces noise and resonance for stable torque at various speeds, allows quick adjustment of current and settings via DIP switch, supports 20-50V and up to 200kHz, includes auto-configuration and integrated protections.
Ft9,167.37
Power distribution module for APM, with BEC 5.3V, XT60, 30V, 90A
Power module for APM, with BEC 5.3V, XT60, 30V, 90A
In Stoc
Provides stable and clean power for APM and Pixhawk directly from LiPo, while providing real-time voltage and current measurement via 6-pin Molex cable connected to PM port. Includes 5.3V up to 3A BEC for controller and accessories, XT60 connector, support up to 30V and 90A current sensor, compact and lightweight for quick installation.
Ft3,286.92
DC Motor 390 6-24V 13000rpm shaft 2.3x14mm
Motor 390, 6-24V, 13000rpm, shaft 2.3x14mm
In Stoc
Compact 390 type motor for DIY micro drilling projects and precision applications, operates at 6-24VDC with 12V recommended and offers speed proportional to voltage up to 26000 rpm. 2.3x14mm shaft for easy coupling to the chuck, 27.6mm housing and 47mm length for integration in small spaces. Easy mounting with 16mm clamps, 100g weight for stability.
Ft2,107.71
Capacitive touch module with dimmer 5-20VDC 3A
Capacitive touch module, 3A, with dimmer, 5-20VDC
In Stoc
Capacitive touch control with dimmer for LED strips and DC 5-20V consumers, recommended 12V, supports 3A in use and up to 10A in peak, allows smooth brightness adjustment with memory and gradual on/off, works through glass or acrylic up to 6mm, includes reverse polarity protection and red-blue LED indicator for status.
Ft662.16
Motor Driver Module, PWM, speed and direction control, 9-60V
Motor Driver Module, PWM, speed and direction control, 9-60V, 20A, 1200W
In Stoc
Precisely controls the speed and direction of brushed DC motors, via PWM for good torque and high efficiency even at low speeds. Operates at 9-60V and supports up to 20A, offers fine adjustment from potentiometer and CW OFF CCW switch for changing direction or stopping. The metal housing protects the electronics and allows for fixed mounting.
Ft2,686.29
SN65HVD230 CAN module 3.3V for ISO11898 networks
Out-of-Stock
CAN communication module, SN65HVD230, 3.3V
Out-of-Stock
CAN communication module for 3.3V projects, also compatible with 5V via level converter, ideal in environments with high interference. Offers reliable transmission and reception up to 1 Mb/s, is ISO11898 compliant for easy integration into automotive and industrial CAN networks, allows expansion up to 120 nodes and includes low-power standby mode.
Ft784.31
Control module 3D printer, display 12864, Ramps 1.4, SD card
3D Printer Control Module, 12864 Display, Ramps 1.4, SD Card
In Stoc
Control panel with 12864 LCD for RAMPS 1.4, allows you to run prints directly from SD card without PC, clearly displays printing status and progress, quick menu navigation with rotary encoder for settings, calibration and axis movement, includes buzzer for feedback and STOP button for quick stop, adjustable contrast from potentiometer.
Ft7,039.46
4G LTE Antenna, Magnetic, TS9, SMA Tata, 698-2700MHz, 12dBi
4G LTE Antenna, Magnetic, SMA Male, 698-2700 MHz, 12 dBi
In Stoc
Magnetic antenna for 4G LTE, designed to quickly improve signal reception and transmission in mobile, wireless, and telemetry applications. It covers 698-2700MHz for extended compatibility, offers 12dBi gain for a stronger signal, has an SMA male connector for easy integration, and a 1.5m cable for flexible mounting.
Ft2,093.93
Current sensor 2ch 0-20/4-20mA RS485
Out-of-Stock
Current sensor, analog acquisition, 2 channels, 0-20mA, 4-20mA, 8-25V, RS485
Out-of-Stock
2-channel analog acquisition module for measuring 0-20mA and 4-20mA current signals, ideal for automation and instrumentation. Communicates via RS485 with Modbus RTU support for quick integration into PLC or SCADA. Operates at 8-25V DC, offers good resolution and typical 1% accuracy, in a compact, easy-to-mount format.
Ft3,741.52
Filter and rectification module amplifier 12A 1200W
Power amplifier filter module, 12A, 1200W
In Stoc
Filter and rectifier module for dual power amplifiers, ideal for stable and clean power supply in audio projects. Supports up to 12A and 1200W, operates in single or dual configuration, has four rectifier bridges for high reliability and 20 LOW ESR capacitors for efficient filtering. Large terminals and protective caps allow safe connection at high currents.
Ft5,453.40
Suport sudura celule 18650, 8 sloturi
18650 cell welding stand, 8 slots
In Stoc
18650 cell spot welding holder with 8 slots, ideal for quick assembly of battery packs. Holds cells stably and maintains correct distance without spacers, allows simultaneous welding on plus and minus for increased efficiency, has a groove for direct insertion of nickel strip up to 10 mm, made of durable ABS for repeated use.
Ft4,471.64
Set of 40 SMD to DIP adapters, 8 types
Set of 40 SMD to DIP adapters, 8 types
In Stoc
Set of 40 SMD to DIP adapter boards, 8 types, 5 pieces of each, for rapid prototyping and integration of SMD circuits on DIP pin boards. Compatible with SOP8, SOP10, SOP14, SOP16, SOP24, SOP28 and TQFP32 to TQFP100, offers precise alignment and easy soldering, comes with a transparent box for organization and storage.
Ft4,748.99
RP2040-Zero 2MB Flash USB-C development board
Development board with Raspberry RP2040, Cortex M0, 2MB Flash
In Stoc
Compact development board for DIY projects and rapid prototyping, based on the RP2040 dual core Cortex-M0+ at 133MHz, with 2MB Flash and 264KB SRAM. Offers 29 GPIO with PWM and ADC, I2C UART SPI interfaces and 8 PIO for advanced control. Easily programmed via USB-C with drag and drop and is MicroPython and CircuitPython compatible, includes addressable RGB LED and temperature sensor.
Ft3,708.46
DIY alarm kit, LED clock, with animations and light sensor
Out-of-Stock
DIY alarm kit, LED clock, with animations and light sensor, acrylic case
Out-of-Stock
DIY kit for assembling an electronic alarm clock, ideal for practicing welding and learning the basics of electronics. After assembly you get an LED display with 13 animations that simulate clock hands, adjustable alarm with piezo buzzer, light sensor for intensity adaptation and temperature sensor for display. 5V power supply via USB, educational project and inspired gift for hobbyists.
Ft4,288.88
MAX4466 microphone module, with amplification, adjustable gain
MAX4466 microphone module, with amplification, adjustable gain, 2.3-5VDC
In Stoc
Electret microphone module with MAX4466 amplifier for audio capture and analysis on Arduino and other boards, operates at 2.4-5V with very good results at 3.3V, has direct analog output to ADC, adjustable gain 25x-125x from potentiometer, provides clean signal with good power supply noise rejection, ideal for FFT, voice effects and audio-reactive projects.
Ft659.40
Electric screwdriver Li-Ion BST-9911A with 4mm bits
Out-of-Stock
Electric screwdriver set, 4mm bit, Li-Ion, 20 accessories, BST
Out-of-Stock
Electric screwdriver for fine mechanics, ideal for repairing phones, laptops and electronics, has a rechargeable Li-Ion battery via USB Type-C, magnetic head and 20 4 mm H4 bits for the most used profiles, includes a 3-LED light for precise work, offers simple control of the direction of rotation and 150 RPM speed for fast and clean screwdriving.
Ft16,828.58
4x MAX7219 red LED matrix module 8x8
LED Matrix Module, 4x, MAX7219, Red
In Stoc
Red LED dot matrix display with 4 8x8 panels, controlled by MAX7219, ideal for messages, graphic effects and microcontroller projects. It connects easily with only 3 data lines, is compatible with Arduino and similar boards, operates at 5V and offers 256 LEDs for good visibility. Compact size 128 x 32 x 13 mm.
Ft2,065.46
Nickel-plated tape, 0.15x8mm, 10M roll
Nickel-plated tape, 0.15x8mm , 10M roll
In Stoc
10 m roll of nickel-plated spot welding tape, ideal for making 18650 battery packs. Made of nickel-plated steel for stable electrical contact and good corrosion resistance, it is 0.15 mm thick and 8 mm wide, it molds easily to the cells and allows for clean and uniform connections.
Ft2,990.28
XH-M609 Low Voltage Disconnect Module 7-50V
XH-M609 module, low voltage disconnect, 7-50V
In Stoc
The XH-M609 module ensures automatic disconnection of the consumer at low voltage, protecting the battery against excessive discharge, operates between 7 and 50VDC, the disconnection and reconnection thresholds are easily programmable in 0.1V steps, the display indicates the voltage in real time, the 20A relay switches the load and the LED confirms the operating status.
Ft1,079.11
Lithium charging protection module, 6-60V, 30A, Display, serial
Lithium charge protection module, 6-60V, 30A, Display, serial communication, XY-L30A
In Stoc
Module for protection and automatic control of 6-60V battery charging, controls the charger via 30A relay with optocoupler and stops or starts charging at manually set HIGH and LOW thresholds. Displays voltage, time and battery percentage on the display, allows limiting the maximum charging time for safety, offers UART 9600 serial communication for monitoring and integration.
Ft2,633.02
6-60V 30A charge discharge controller module CD63L30A
Battery charge-discharge control module, 6-60V, 30A, CD63L30A
In Stoc
Control module for charging and discharging protection of 6-60V batteries, automatically controls a 30A relay to maintain the voltage between the set thresholds, works with both charger and consumer, has a timer for maximum charging limit, display with voltage, time and battery percentage, direct output without voltage conversion.
Ft6,798.84
E-Switch mosfet module, 3-12V control, 5-36V output, with
E-Switch mosfet module, 3-12V control, 5-36V output, with optoisolator
In Stoc
Switches and regulates LED strips, DC motors and other loads via PWM, controlled by Arduino or microcontrollers. It has opto-isolator for power control separation, 3-12V input and 5-36V output, supports up to 22A with active cooling, 2.54mm DuPont compatible pins for quick connection.
Ft1,562.18
E-Ink Display 2.13 inch SPI 3.3-5V
E-Paper Screen, E-Ink, 2.13", SPI, 3.3-5V, Black
In Stoc
2.13 inch E-Ink display for Arduino, STM32, Raspberry Pi and other board projects, ideal for paper-like display with very low consumption. 296x128 resolution for clear text and icons, good visibility in bright light with 170 degree viewing angle, SPI interface for quick connection, image remains displayed even without power.
Ft9,713.81
SI4713 FM transmitter module I2C 3-5V
FM transmitter module, SI4713, I2C, 3-5VDC
In Stoc
FM transmitter module with Si4713 for Arduino projects and other boards, controlled via I2C, allows stereo audio output via AUX input and sending RDS information such as song title or messages. It operates at 3-5VDC for easy integration, offers software setting of the frequency and transmission power, with a typical range of up to 10 m which can be increased with the antenna.
Ft4,253.06
Precision Real Time Clock Module, RTC, DS3231, with battery
Precision Real Time Clock Module, RTC, DS3231, with battery, 3.3-5V
In Stoc
Precision RTC module for maintaining time and date in Arduino projects or other boards, operates at 3.3-5V and communicates I2C. Offers full calendar up to 2100, high accuracy ±5ppm and two programmable alarms, has integrated backup battery for keeping time during power outages.
Ft1,693.51
0.96 TFT IPS Display SPI ST7735 80x160
Display TFT 0.96", IPS, SPI, 65K colors, LCD ST7735, 80x160, 8P
In Stoc
0.96 inch IPS color display module for Arduino projects and other development boards, ideal for compact interfaces with clear graphics and text. Offers 80x160 resolution with 65K colors and individually controllable RGB pixels, communicates quickly via SPI with ST7735S controller. Wide viewing angles thanks to IPS panel, backlight controllable via BLK pin, power and logic at 3.3V.
Ft1,701.78
S-160 silicone pad magnetic 300x450mm for soldering
Out-of-Stock
Silicone pad, S-160, 300x450mm, magnetic, with cover
Out-of-Stock
Heat-resistant silicone pad for soldering, ideal as a work surface for electronics and service. Withstands up to 500°C, has magnetic areas for parts, compartments with lids for organization and numbered screw locations, includes integrated 36 cm ruler with inch markings, generous 300x450 mm format for larger projects.
Ft7,707.13
1.3 inch TFT IPS SPI Display ST7789V 240x240
Display TFT 1.3", IPS, SPI, 65K colors, LCD ST7789V, 240x240, 7P
In Stoc
1.3 inch IPS color display module for Arduino projects and development boards, ideal for compact graphical interfaces, menus and real-time data display. Offers 240x240 resolution with 65K colors and wide viewing angles, fast SPI control with ST7789V driver and BLK pin for backlight management, operates at 3.3V for power and logic.
Ft2,325.36
TTGO T-Display development board, ESP32, WiFI, Bluetooth
TTGO T-Display development board, ESP32, WiFI, Bluetooth, Display 1.14", USB Type-C
In Stoc
Compact development board for IoT prototyping and graphical interfaces, with ESP32 dual core 240MHz, integrated WiFi and Bluetooth, 1.14 inch color IPS display for fast data display, USB Type-C with CP2104 for easy programming, support for charging and powering from a 4.2V Li-Ion battery via JST connector, includes Reset button and two buttons on GPIO.
Ft10,743.33
Logic level converter module, 3V3 IN, 5V OUT, Common Cathode
Logic level converter module, 3V3 IN, 5V OUT, Common Cathode, PNP
In Stoc
Quickly converts 3.3V to 5V logic signals for Arduino and other development boards, with 4 channels and optical isolation for protection. It operates with 5V power supply on VCC and GND, uses PNP common cathode connection, and at 3.3V input it gets 5V output, switching up to 10 kHz. Simple connection via screw terminals.
Ft2,486.08
Logic level converter module, 3V3 IN, 12V OUT, Common Cathode
Logic level converter module, 3V3 IN, 12V OUT, Common Cathode, PNP
In Stoc
Quickly converts 3.3V logic signals to 12V for safe control of industrial loads, ideal with Arduino and other development boards. It has 4 channels, optoisolation for electrical separation, PNP input with common cathode and 12V output proportional to the logic level. It is powered by 12V on VCC and GND, screw terminal connections.
Ft2,291.38
Logic level converter module, 5V IN, 3V3 OUT, Common Cathode
Logic level converter module, 5V IN, 3V3 OUT, Common Cathode, PNP
In Stoc
4-channel logic level converter, ideal for adapting 5V to 3.3V signals between Arduino and 3.3V. Offers optical isolation for increased protection and compatibility, quick screw terminal connection, PNP common cathode scheme and stable switching up to 10kHz, 3.3V power supply on VCC and GND.
Ft2,291.38
Logic level converter module, 5V IN, 12V OUT, Common Cathode
Logic level converter module, 5V IN, 12V OUT, Common Cathode, PNP
In Stoc
It quickly converts 5V logic signals into 12V commands for relays, solenoid valves or industrial inputs, being compatible with Arduino and other development boards. It has 4 channels, optoisolation for electrical separation, PNP common cathode connection and screw terminals for secure wiring, switches up to 10 kHz and requires 12V power supply on VCC and GND.
Ft2,485.16
LCD Display 7", 800x480, IPS, TFT, Capacitive Touchscreen
Out-of-Stock
LCD Display 7", 800x480, IPS, TFT, Capacitive Touchscreen, SDWb070T84C, TTL, RS232, 6-35V
Out-of-Stock
7 inch IPS LCD display with 800x480 resolution and capacitive touchscreen, ideal for HMI interfaces in industrial projects and electronic equipment. It plays content directly and allows for rapid GUI development with the VT9560 processor, communicates easily via TTL or RS232 with microcontrollers, operates at 6-35V and supports 90, 180 or 270 degree rotation in software.
Ft29,191.94
Ethernet module, ENC28J60, SPI interface, 3.3V, Crystal 25MHz
Ethernet module, ENC28J60, SPI interface, 3.3V, 25MHz crystal
In Stoc
Quickly add Ethernet connectivity to Arduino or other board projects by converting Ethernet to SPI for easy integration with microcontrollers. It operates at 3.3V, uses the ENC28J60 chip with an integrated 25MHz crystal, communicates via SPI up to 20MHz, and ensures stable transmission with Full and Half-Duplex support and automatic filtering of erroneous packets.
Ft3,011.40
Programmable 4-key RGB keyboard USB Type-C for Windows
Programmer keyboard, 4 Keys, RGB LED, Type-C
In Stoc
Quick access to essential commands for efficient work, with 4 dedicated mechanical keys for Copy, Paste, Ctrl All and Cut. It connects easily via USB A to Type-C, includes a 1 m cable and is compatible with Windows. The ABS-laminated acrylic base highlights dynamic RGB lighting in fade mode, for a modern and visible technical setup.
Ft6,497.61
Amplifier module with 18650, PAM8403, 2x5W output, Bluetooth
Amplifier module with 18650, PAM8403, 2x5W output, Bluetooth, Stereo, SD Card
In Stoc
Compact solution for audio playback and stereo amplification, offers 2x5W at 4 ohms with PAM8403 class D, plays music via Bluetooth, USB or MicroSD card, is powered at 5V via MicroUSB or from a 18650 battery in a dedicated slot, includes charge management and status LEDs.
Ft2,380.47
AC voltage sensor module with transformer, ZMPT101B 2MA
AC voltage sensor module with transformer, ZMPT101B 2MA, adjustable amplitude
In Stoc
AC voltage sensor for monitoring a phase in Arduino projects and 5V boards, uses ZMPT101B transformer and precision amplifier to deliver on the ADC pin a 0-5V analog signal corresponding to 0-250VAC measurement. Includes potentiometer for quick calibration, provides galvanic isolation and operates on 5-30V supply.
Ft1,024.92
Integrated circuit extractor, metal tool, BST-611
Integrated circuit extractor, metal tool
In Stoc
Metal tool for quick and safe extraction of integrated circuits from boards, with spring-loaded button operation and 4 retractable tweezers for firm grip. Offers a maximum opening of 15 mm, length 120 mm and robust construction for repeated use. Can also be used with cotton wool to clean PCBs, color may vary depending on the batch.
Ft1,206.76
Electronic repair kit 16 pieces
Electronic repair kit, 16 pieces
Last items in stock
Complete set for electronic repairs on phones and laptops, ideal for soldering and quick interventions. Includes 40W soldering iron with holder and sponge, flux pump and 0.6 flux for cleaning and restoring connections, screwdrivers and cutter for precise disassembly, pliers, wire strippers, tweezers and plastic levers for safe handling of components.
Ft19,139.25
30-second recording board with playback, button trigger, for
Out-of-Stock
30-second recording board with playback, button trigger, for DIY greeting cards
Out-of-Stock
The ideal audio module for DIY greeting cards, allows clear recording and playback of a message of up to 30 seconds, includes a microphone and integrated speaker for direct playback, operates on button batteries and is ready to use with 2-button triggering, supporting easy modification for external or photosensitive trigger, for interactive effects when opening the card.
Ft1,760.55
Metal geared motor TT 3-6V 1:90 single shaft
Geared motor, metal gears, 1 shaft, 3-6V, 1:90, TT
In Stoc
TT All Metal gear motor for robotic projects and compact mechanisms, offers higher torque and reliability than the plastic gear version, operates at 3-6VDC, 1:90 reduction for good speed control, approximately 110RPM at 6V, single shaft for easy assembly and direct drive.
Ft1,680.65
Module with ultrasonic sensor, JSN-SR04T, v3.0, waterproof
Ultrasonic sensor module, JSN-SR04T, v3.3, waterproof, 3-5V
In Stoc
Waterproof ultrasonic module for non-contact distance measurement, ideal for automation, level monitoring and object detection in wet or dusty environments. It operates at 3-5V, offers stable measurement between 21 and 500 cm with fine resolution, has temperature compensation and improved filtering for better accuracy. Easily compatible with Arduino, ESP32, STM32 via TRIG and ECHO.
Ft4,255.82
WS2812B addressable LED ring RGB 61 LED 90mm
Addressable ring module, RGB, WS2812, LED 5050, with driver
Last items in stock
Addressable RGB LED ring with 61 WS2812B 5050 LEDs, ideal for dynamic lighting effects in Arduino projects and other development boards. It is easily controlled via a single data wire, allows cascading for quick expansion, operates at 5V and provides uniform illumination over an outer diameter of 90mm.
Ft2,273.93
56mm Traffic Light LED Module 3.3-5V for Arduino
LED traffic light module, 56mm, 3.3-5V
In Stoc
Ideal for simulating a traffic light in Arduino projects and other development boards, the module includes red, yellow and green LEDs with integrated resistors for direct connection to 3.3-5V. It quickly mounts on a breadboard, has digital inputs and a common cathode interface, and offers a compact 56mm form factor for easy prototyping and testing.
Ft214.90
TB6600 stepper motor driver 0.5-5A 9-42V
Stepper motor driver, TB6600, 0.2-5A
In Stoc
Driver for 2 and 4 phase stepper motors, ideal for Nema17, Nema24 and Nema34, offers adjustable current 0.5-5A and microstepping 1, 2, 4, 8, 16 for smooth and precise movement. Optoelectronically isolated inputs for fast control, sinusoidal bipolar PWM for reduced vibrations. Aluminum housing for efficient cooling and increased protection.
Ft9,454.83
50Kg load cell half bridge compatible with Arduino
50Kg load cell, half-bridge structure
In Stoc
Half-bridge load cell for weighing projects up to 50Kg, ideal for Arduino and other development boards, operates at 3-5VDC and has an internal resistance of 1000ohm. Can be used in configurations with multiple sensors in parallel to increase capacity, recommended with 4 sensors connected diagonally and the HX711 module. Compact dimensions 34x34mm.
Ft447.26
SMA female to IPX antenna connector 15cm
Wired antenna connector, AP, SMA Female to IPX, 15cm, 0-3GHz
In Stoc
15cm wired antenna extension for connecting an Access Point to an external antenna, with SMA female to U.FL IPX IPEX1 RF1.13 adapter, compact MHF4 connector for mounting in narrow spaces, 1.5mm diameter and 1mm height, compatible with RF applications in the 0-3GHz band.
Ft594.20