Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
CAN interface control module, TJA1050, 5V
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
All orders minimum 100€
The CAN controller module that uses the integrated TJA1050, compatible with Arduino and other development boards, offers an efficient and robust solution for communication on CAN networks in various industrial and automotive applications. With its help, users can easily implement a reliable CAN connection, optimizing at the same time the performance and efficiency of communication between devices. Based on the TJA1050 chip, this module ensures stable and fast data transmission in CAN systems. Its compact design and user-friendly interface make this module ideal for developers, engineers and hobbyists who want to integrate CAN communication in their projects. On one side of the module there are pins dedicated to the microcontroller (power, RX and TX), and on the opposite side we find CAN H and CAN L for CAN communication.
Specifications:
Chipset: TJA1050
Working voltage: 4.5V - 5.5V
Transmission speed: up to 1 Mbit/s
Interface: CAN
Bus length: maximum 1000 meters
Operating temperature: -40°C to +125°C
Connectors: Standard 2.54mm
Dimensions mm: 22 x 11mm
Pins:
VCC = 5V power supply
TX = Data transmission to the microcontroller. It reads the data from the CAN controller and sends them on the bus lines to the development board
RX = Receive data from the microcontroller. It reads the data from the bus lines and sends them to the CAN controller
GND = GND, Ground, which connects to the MCU
CANH = CAN Bus H connection. CANH connects to the port's CANH
CANL = CAN Bus L connection. CANL connects to the port's CANL
