MCP4725 DAC Module I2C 12-bit with EEPROM and analog output
New
MCP4725 DAC module, I2C, 12-bit, with EEPROM, HW-315
In Stoc
Breakout module with the MCP4725 converter, a 12-bit DAC with I2C interface, which converts a digital value into a real analog voltage on the OUT pin, useful for signal generation, adjustable voltage references, and analog control in projects with Arduino, ESP32, STM32, or Raspberry Pi. It features internal EEPROM memory, an I2C address selectable via the ADDR jumper, and disableable pull-ups for setups with multiple modules on the same bus, with a supply of 2.7 - 5.5 VDC.
11.59 RON
Waveshare ESP32-S3 development board, capacitive IPS LCD round display 480x480
NewOut-of-Stock
Waveshare ESP32-S3 development board, capacitive touch, round IPS LCD, 2.8 inch, 480x480, WiFi and Bluetooth
Out-of-Stock
Development board with ESP32-S3 and a 2.8-inch round capacitive touchscreen, 480x480, ideal for HMI interfaces, dashboard panels, and IoT projects with a compact display. It offers 2.4GHz WiFi and Bluetooth 5, generous 16MB Flash and 8MB PSRAM for smooth graphics with LVGL, includes microSD, RTC, and a 6-axis IMU sensor, and supports easy programming via USB-C.
386.10 RON
FM radio transmitter module DSP PLL 87 - 108 MHz, 100 mW, with LCD and control buttons
New
FM radio transmitter module, DSP PLL, 87–108 MHz, LCD, campus mode 76–108 MHz
In Stoc
FM radio transmitter module with DSP and PLL technology, with LCD display and 5 buttons, transmits stereo on the 87.0 - 108.0 MHz band or, in campus mode, on the 76.0 - 108.0 MHz band, with an output power of 100 mW. It accepts audio signal from LINE, USB, or the built-in MIC microphone, is powered by 3.0 - 5.0 VDC, and uses a 75 cm antenna. Suitable for wireless microphone, audio broadcasting from a phone or PC, and short-range DIY broadcasting projects.
62.13 RON
FM stereo receiver module DSP PLL 87 - 108 MHz with LCD display
New
FM DSP PLL radio receiver module, 87–108 MHz with LCD, Campus mode 76–108 MHz, stereo output 2x3W
In Stoc
FM stereo radio receiver module with DSP and PLL, LCD display and two rotary encoders VOL and FRE for volume and tuning, ideal for active speakers, wireless microphones, school public address systems and DIY projects. It covers the standard 87.0 - 108.0 MHz band, extendable to 76.0 - 108.0 MHz in Campus mode for university stations, with 500 mW stereo audio output on headphones or 2x3 W on speakers, UART serial control and automatic settings memory.
77.59 RON
Worm gear motor 5840-31ZY 12V 12RPM
New
Worm gear motor, 5840-31ZY, 80 RPM, 12V
In Stoc
DC motor with worm gearbox for applications that require high torque and self-locking, ideal for lifting, opening, or actuators where it must not move back without power. It delivers 80 RPM at 12V, reversible direction by reversing polarity, 8 mm metal shaft for couplings and gears, easy control from Arduino, STM32, or ESP32 via driver and PWM.
129.06 RON
Worm gear motor 5840-31ZY 12V 12RPM
New
Worm gear motor, 5840-31ZY, 80 RPM, 24V
In Stoc
24V DC motor with worm gearbox for applications that require high torque and self-locking, it does not rotate backward without power for increased stability. It offers 80 RPM no-load, low current consumption of 0.2A, 8mm metal shaft for couplings and robust mechanisms. Reversible direction by reversing polarity, compatible with Arduino, ESP32, or STM32 via driver and PWM.
129.06 RON
Aluminum heatsink I-50 for SSR relays, DIN rail mounting, 10-25A
New
Aluminum radiator I-50, SSR relays, 10–25A, DIN rail
In Stoc
Ensures efficient cooling of single-phase 10-25A SSR relays, quickly absorbing heat and dissipating it passively through the fins, for stable operation and a longer service life. It mounts directly on the relay with a 49 mm attachment, has a 60x50 mm contact plate, and is easily fixed on a 35 mm DIN rail or on a panel, with a lightweight aluminum construction.
13.39 RON
ToF sensor module VL53L5CX, 8x8 zone with VCSEL laser, I2C
New
ToF Sensor Module VL53L5CX, 8x8 zone, I2C, 3–5 VDC
In Stoc
High-precision VL53L5CX Time-of-Flight sensor with configurable multi-zone detection up to 8x8 (64 zones), measures distance up to 4 meters using an invisible VCSEL laser and operates at frequencies up to 60 Hz. I2C interface, 3 - 5 VDC power supply, compatible with Arduino, ESP32, Raspberry Pi and other platforms, suitable for robotics, environment mapping, obstacle detection and smart systems.
129.37 RON
Clip-on enclosure for HCW-M421 XY-LJ02 module with 4 buttons
New
Housing for the HCW-M421, XY-LJ02 module, snap-on without screws, with 4 buttons
In Stoc
3D-printed enclosure, snap-fit without screws, specially designed for the HCW-M421 / XY-LJ02 timer relay module, with four dedicated 9 mm buttons for STOP, SET, UP, and DOWN, a tapered window for the display, a hole for the status LED, and cutouts for both terminal blocks and the micro-USB connector, ideal for panel mounting or use on a workbench without looking like a prototype.
24.37 RON
Addressable LED strip WS2812B IP20 10cm 5V RGB
WS2812B addressable LED strip, IP20, 10 cm
In Stoc
Compact solution for RGB lighting effects controlled in DIY and ambient projects, with 6 SMD5050 LEDs per 10 cm, each pixel individually addressable through the integrated WS2812B controller. It operates at 5V and is easily controlled through a single data pin with Arduino, ESP32, or Raspberry Pi. Cut spacing at each LED, IP20 for indoor use.
4.63 RON
Waveshare Pi Pico 2 Plus RP2350A development board USB-C
Waveshare Pi Pico 2 Plus Development Board, RP2350
In Stoc
Compact development board for embedded projects and rapid prototyping, with RP2350A dual-core selectable Arm Cortex-M33 or RISC-V up to 150 MHz, 520 KB SRAM and 4 MB flash, 26 GPIO with SPI I2C UART ADC PWM and PIO for custom protocols. USB Type-C for programming and power, Li-Ion battery support with integrated charging for portable applications.
81.75 RON
LJA18M-10N1 inductive proximity sensor M18 NPN NO 10mm
Inductive proximity sensor, NPN, NO, LJA18M-10N1, 6-36V
In Stoc
Inductive proximity sensor for non-contact detection of metal objects, ideal for automation and DIY projects. It mounts quickly on an M18 thread, has an NPN NO output compatible with PLC and Arduino, operates at 6-36 VDC, and offers detection up to 10 mm. Rugged housing with IP67 protection and a status LED for quick verification.
55.08 RON
Analog flex sensor 2.2 inch, compatible with Arduino ESP32
Flex Sensor 2.2 inch, Analog, for robotic glove
In Stoc
2.2 inch flexible analog sensor for measuring bending degree in robotic gloves and wearable projects, changes its resistance from 25K ohm straight to 45K-125K ohm when bent for easy reading with ADC. Durable, over 1 million cycles, operates between -35 and +80°C, 2-pin interface with 0.1 pitch, compatible with Arduino, ESP32, STM32.
143.26 RON
Inductive sensor LJA18M-10N2 M18, NPN NC, 10 mm detection
Inductive proximity sensor, NPN, NC, LJA18M-10N2, 6-36V
In Stoc
Inductive proximity sensor for non-contact detection of metal objects, ideal for industrial automation and DIY projects. It offers a 10 mm detection distance, NPN normally closed output compatible with PLCs and microcontrollers, 6-36 VDC power supply, and status LED. Robust M18 nickel-plated brass housing and IP67 protection for dusty and humid environments.
55.08 RON
SIM800C GSM Module USB 5V Quad-band for Arduino ESP32
USB Mode on GSM SIM800C – Quad-band, GPRS, Bluetooth
In Stoc
Compact solution for GSM connectivity in automation and prototyping projects, it allows SMS, voice calls, and GPRS data transfer via AT commands. It connects directly to a PC via 5V USB thanks to the CH340T and appears as a virtual serial port. It works globally on quad band 850 900 1800 1900 MHz, includes Bluetooth and an SMA connector for the antenna, compatible with Arduino, STM32 and ESP32.
67.74 RON
AG8 Smart IR Controller ESP32-S3, 8 IR channels, WiFi Ethernet
ESP32-S3 Smart IR Controller, Home Assistant, AG8
Last items in stock
DIN module for automating equipment with remote control, simultaneously controls up to 8 IR devices through independent channels and quickly learns codes with the built-in IR receiver. It integrates automatically into Home Assistant via MQTT, offers stable connectivity via WiFi or Ethernet, and is powered directly at 9-24 VDC, with USB-C for programming and backup.
726.40 RON
Manual deburring tool, metal handle, 11 blade set
Deburring Tool, Metal Handle, 11 Blades
In Stoc
Manual rotary deburring tool for the quick and precise removal of burrs and sharp edges from metal, plastic, resin, wood, or 3D-printed parts. The 360° rotating head automatically follows the working direction for good control in difficult areas, the aluminum handle provides an ergonomic grip, and the set includes 11 interchangeable steel blades for heavy-duty use.
32.77 RON
3.5 inch TFT LCD Display ILI9486 480x320 for Arduino Mega
3.5 inch TFT LCD Display, ILI9486, 480x320, Arduino compatible
In Stoc
The 3.5 inch TFT LCD module for Arduino Mega 2560 offers clear color display for graphical interfaces, menus, and data, with a resolution of 480x320 and 65K colors. The ILI9486 controller accurately renders text and graphics, the 16-bit parallel interface ensures fast refresh, and the integrated 5V to 3.3V logic level conversion allows direct connection. It includes a microSD slot for loading images and content.
127.13 RON
BME280 sensor module GY-BME280 3.3V I2C SPI Arduino ESP32
BME280 Sensor Module, Pressure, Temperature, and Humidity, GY-BME280, 3.3V
In Stoc
Precision digital sensor for simultaneous measurement of pressure, temperature, and humidity, ideal for weather stations, environmental monitoring, altimeters, and IoT projects. Operates at 3.3V with very low power consumption, communicates via I2C or SPI for quick integration with Arduino, ESP32, STM32, and Raspberry Pi, offering fine resolution and good stability in readings.
49.80 RON
BME280 sensor module 5V GY-BME280 pressure temperature humidity
Out-of-Stock
BME280 Sensor Module, Pressure, Temperature and Humidity, GY-BME280, 5V
Out-of-Stock
High-precision digital sensor for simultaneous measurement of pressure, temperature, and humidity, ideal for weather stations, automation, and IoT projects. The 5V version has an integrated regulator and logic level conversion, allowing direct connection to Arduino without additional circuits and remains compatible with 3.3V platforms. It offers I2C and SPI interfaces, fast response, and good measurement stability.
49.86 RON
ESP32-S3 AI voice assistant module with 1.54 inch LCD and audio
Out-of-Stock
AI Voice Assistant Module, with ESP32 S3, LCD 1.54inch, Audio
Out-of-Stock
Compact solution for voice assistant projects with display, based on ESP32-S3, offers Wi-Fi and Bluetooth for quick integration into smart home and prototypes, includes ES8311 audio codec with integrated microphone and speaker output, displays the conversation and status on a 1.54-inch color LCD screen, supports switching between AI models such as Qwen, DeepSeek, and Doubao via xiaozhi.me, and is easy to program via USB-C.
154.70 RON
GC0308 0.3MP IR camera module USB 5V for Raspberry Pi
IR Camera Module, GC0308, 0.3MP, Plug-and-Play, USB 5V
Last items in stock
Compact IR camera module for clear close-range captures, ideal for IoT applications, access control, or QR scanning. It offers VGA 0.3MP image quality with an 80-degree angle, up to 120 fps for smooth streaming, 850 nm IR LEDs for night vision, and USB 5V plug-and-play UVC connectivity, compatible with Windows, Linux, macOS, Android, and Raspberry Pi.
107.73 RON
WiFi Probe Module TZ-DT06, passive MAC sniffer, ESP-M2
WiFi Probe Mode, Passive Sniffer, MAC Addresses, TZ-DT06, ESP M2,5V
In Stoc
Compact module for passive 802.11 sniffing, captures MAC addresses from probe requests for monitoring nearby WiFi devices without network association. Quickly transmits data over UART in hex format with timestamp and CRC, has a FIFO buffer to prevent losses, and an adjustable RSSI threshold for distance filtering. Compatible with 3.3V or 5V, ideal for pedestrian traffic analysis and presence detection.
26.20 RON
TTL-USB BusLinker V2.4 module for LX-16A servo bus
TTL/USB Module, BusLinker V2.4, for serial servomotors
In Stoc
The essential TTL-USB interface for controlling LewanSoul serial bus servomotors, the only debug board compatible with their protocol, allows quick connection to a PC via microUSB for settings and real-time angle reading, offers direct connection to TX RX for Arduino STM32 ESP32, has 6-8.4V power supply via screw terminal and dedicated servo connectors, compact and reliable with CH340C.
51.16 RON
Breadboard SYB-46 270 holes 2.54mm Arduino ESP32 compatible
Breadboard 270 points, SYB-46, 2.54mm, modular
In Stoc
270-point solderless breadboard, ideal for rapid testing of circuits without soldering. 2.54 mm pitch for common modules and microcontrollers, includes a voltage regulator for simple power supply, modular construction expandable by joining with other boards, durable material for repeated use in the lab or at home.
7.83 RON
Hiwonder STM32 bus servo controller, compatible serial bus servo
Controller Bus Servo, Hiwonder, STM32
In Stoc
Serial bus servo motor controller, ideal for robotics and automation, based on STM32 Cortex-M3 for fast and stable commands. Controls up to 40 servos through 10 ports with serial connection, stores complex motion sequences in 16M memory, and allows manual or PC programming without drivers. Supports wireless control with PS2 joystick and TTL UART communication for easy integration with Arduino or other MCUs.
352.81 RON
GY-BNO055 module, 9-axis orientation sensor, I2C UART, 3-5V
Absolute orientation sensor module, 9 axes, GY-BNO055, IIC, Serial, 3-5V
In Stoc
Compact module for measuring absolute orientation on 9 axes, ideal for robotics, navigation, and wearable devices. It performs sensor fusion directly on-chip for stable and fast data, and includes an accelerometer, gyroscope, and magnetometer with an ARM Cortex-M0+ processor. It operates at 3-5V and communicates easily via I2C or UART, compatible with Arduino, ESP32, STM32, and Raspberry Pi.
103.70 RON
7 inch HDMI IPS touchscreen monitor 1024x600 for Raspberry Pi
7-Inch Touchscreen Monitor, Capacitive, HDMI, IPS, 1024x600, Compatible with Raspberry Pi
Last items in stock
Quickly transform a Raspberry Pi or any HDMI source into a control panel, portable terminal, or media center. The 7-inch IPS display with 1024x600 resolution delivers vivid colors and wide viewing angles, while the capacitive touchscreen with up to 5 touch points ensures precise control. Plug and play connection via HDMI and Micro-USB, with stereo speakers and a 3.5 mm jack for audio.
435.73 RON
Contactless IR touch sensor for LED strip, 5-24V
IR touch sensor, LED strip, contactless detection, 5-24V
In Stoc
You discreetly control LED strips without contact, by touch or by moving your hand 10–20 mm away, with hidden installation behind wood, glass, or plexiglass up to 5 cm, without drilling. It works on 5–24V DC, supports up to 3A, has 4 selectable modes including ON/OFF and continuous dimming, with very low standby consumption and a compact 32x32 mm board.
38.03 RON
SIM808 GSM GPRS GPS Bluetooth Module, 5-25V, Arduino compatible
SIM808 development module, GSM-GPRS-GPS-Bluetooth, 5–25V
In Stoc
Development board for communications and localization, ideal for IoT and telemetry projects. It offers quad-band GSM GPRS, precise GPS with fast fix, and Bluetooth, with control via AT commands over UART with autobaud. The UART logic level is selectable at 1.25V, 3.3V, or 5V via VMCU, compatible with Arduino, STM32, ESP32, and Raspberry Pi. Includes GSM and GPS antennas.
132.69 RON
DS30P2 PNP NC IR photoelectric sensor module 30cm 6-36V
IR photoelectric sensor module, DS30P2, PNP, NC, 30 cm, 6–36 V
In Stoc
IR photoelectric sensor for proximity detection in industrial applications, operates by diffuse reflection without a reflector, wide 6-36V DC supply for easy integration with PLCs and microcontrollers. It offers a 3-wire PNP NC output, adjustable distance up to 30 cm and fast 2 ms response, M18 housing with IP67 protection and status LED for quick verification.
32.95 RON
Xiaozhi AI voice assistant module ESP32-S3 with audio and WiFi
AI Voice Assistant Module, ESP32 S3, Audio, Xiaozhi
In Stoc
Compact solution for projects with AI voice assistant and display, based on a dual-core ESP32-S3 at 240 MHz with 16MB Flash and 8MB PSRAM for fast response. Includes a 1.54" LCD, integrated microphone, and ES8311 audio codec for natural conversations with an external speaker. Offers 2.4 GHz Wi-Fi and Bluetooth 5 LE, and can be easily programmed via USB-C in Arduino IDE, ESP-IDF, or MicroPython.
157.29 RON
XY-MB02YF Bluetooth proximity relay module, 5V relay
Bluetooth proximity switch module, with relay, XY-MB02YF, 5V
In Stoc
Smart proximity switch with Bluetooth BLE, automatically activates a bistable relay when the phone connects and turns off the load after leaving range or disabling Bluetooth. Works without an app, compatible with iOS and Android, has very low power consumption thanks to the latching relay, supports control of up to 10A, and allows advanced settings via AT commands over UART.
74.51 RON
Sinilink XY-WFPOW ESP8285 serial to WiFi converter module
Serial-to-WiFi Converter Module, Sinilink, XY-WFPOW, ESP8285H16
In Stoc
Compact WiFi module with ESP8285H16 that adds remote control and real-time monitoring to Sinilink programmable power supplies, mounts directly on the board via a dedicated connector, communicates via 3.3V UART with a ModBUS bridge for commands and telemetry, operates at 3.3-5V with internal regulation, and supports advanced integration through alternative firmware such as ESPHome or Tasmota.
83.56 RON
MAX31865 temperature sensor module for PT100, SPI 3-5V
MAX31865 Temperature Sensor Module, PT100 Sensor, 3-5V
In Stoc
Precision converter for temperature measurement with a PT100 sensor, ideal for industrial and laboratory projects, communicates quickly via SPI with microcontrollers such as Arduino or Raspberry Pi. It offers a 15-bit ADC with fine 0.03125°C resolution, accuracy up to ±0.5°C, conversion time of up to 21 ms, and automatic detection of broken cable or short circuit. Power supply 3-5V.
57.41 RON
Nema17 stepper motor with 27:1 planetary gearbox, 1.68A
Stepper Motor Nema17, Planetary Gearbox 27:1, 1.68A, 12-36V
In Stoc
Ideal for applications that require high torque and smooth motion at low speeds, such as 3D extruders, CNC machines, or robotic arms. The 27:1 planetary gearbox provides an output step of 0.067° and backlash under 1°, and the 1.68A bipolar motor works with STEP DIR drivers at 12-36V, with an 8 mm shaft and D-cut for secure mounting.
538.33 RON
RG58 coaxial cable 2m with male SMA connectors
RG58 coaxial cable, 2 meters, SMA Tata connectors
In Stoc
2m RG58 coaxial cable with SMA Male connectors on both ends, ideal for extending and connecting WiFi antennas, RF modules and communication equipment. The 50 ohm impedance ensures stable transmission with low loss, and the SMA connectors offer secure attachment and wide compatibility. The 2m length allows flexible positioning of the antenna.
59.10 RON
RP2040 compatible development board, 2MB Flash
RP2040 Compatible Development Board, Cortex M0, 2MB Flash
In Stoc
Compact board for DIY projects and rapid prototyping, with RP2040 compatible dual core Cortex-M0+ chip at 133MHz, 2MB Flash and 264KB SRAM for stable embedded applications. Offers flexible connectivity via GPIO, PWM, I2C, UART and SPI, easy programming via USB-C drag and drop, plus integrated WS2812 RGB LED for visual feedback in small and wearable projects.
20.50 RON
Kit DIY Fidget Spinner, SMD, Animatii LED
DIY Fidget Spinner Kit, SMD, LED Animations
In Stoc
DIY kit for electronics enthusiasts, which displays texts and LED patterns during rotation thanks to the microcontroller and 12 SMD LEDs. It is assembled by SMD hot air soldering, providing a practical learning experience. It works with 2 CR2032 batteries not included, and the effects can be customized via downloader and external programmer, for educational and creative projects.
21.73 RON
Speaker protection module 12-15VAC, power-on delay
Out-of-Stock
Speaker protection module, delayed start, 12-15VAC, stereo
Out-of-Stock
Stereo speaker protection module with delayed start, reduces pops at start by delaying approximately 3 seconds and disconnects at the appearance of DC voltage of approximately 1V. It uses a robust 15A relay, is compatible with most amplifiers and offers clear monitoring via status LED. Separate power supply 12-15VAC, compact dimensions 65x40mm.
26.63 RON
Magnetic wristband for screws and small accessories
Magnetic bracelet, screw holder and accessories
In Stoc
Keeps screws, nails, drill bits and small metal accessories close at hand while you work, with 3 hidden neodymium magnetic zones for a secure hold. Made from durable polyester, it is adjustable and fastens firmly with Velcro, providing comfort and mobility without interrupting your work.
22.55 RON
PTFE tube cutter, 90 degree cut
Out-of-Stock
PTFE tube cutter, 90 degrees
Out-of-Stock
Mini portable cutter for precise 90 degree cutting of PTFE tubes, ideal for 3D printing and replacing the tube end in the hotend area. The V-guide holds the tube correctly, and the triangular stainless steel blade cuts by sliding for a clean section, without deformation. Helps to form a tight seal with the print head, reducing the risk of leaks and blockages.
10.22 RON
Instrument lipire filament 1.75mm
1.75mm filament soldering tool
In Stoc
Aluminum connector for bonding 1.75 mm 3D filament ends, ideal for joining two rolls and combining colors of the same material, reduces waste and allows printing to continue without interruption. Compatible with PLA, ABS and other 1.75 mm filaments, internal guide for correct alignment, easy to use with a lighter to melt the ends.
45.33 RON
Capacitive screen module, TFT LCD, 1.54 inch, ST7789, 3.3V, 3
Capacitive screen module, TFT LCD, 1.54 inch, ST7789, 3.3V, 3 Wire, 9BIT
In Stoc
1.54 inch TFT color display with capacitive touch, ideal for compact graphical interfaces in IoT projects and portable devices. Offers 240x240 resolution and IPS panel for vivid colors and wide viewing angle, ST7789V controller with 9-bit 3-wire SPI communication without DC pin, FT6236 capacitive touch on I2C for simple and responsive touch control.
81.06 RON
ESP32 38P expansion terminal with screw terminals
Out-of-Stock
Expansion terminal for ESP32, 38P
Out-of-Stock
The ESP32 breakout board brings all 38 pins to screw terminals for quick and secure wiring without soldering. It provides easy access to GPIO, allows for mounting and removing the development board without disconnecting the connections, is compatible with most 38P ESP-32S modules, and is ideal for prototyping, IoT, and automation.
18.30 RON
M1C1 360 degree rotating LiDAR module UART
Out-of-Stock
360 degree LIDAR module, M1C1, rotating, UART
Out-of-Stock
2D LiDAR sensor with 360° laser scanning, ideal for autonomous navigation, mapping and obstacle avoidance, quickly generates a detailed point cloud for precise positioning, detects up to 8 m with optimal performance between 0.1 and 6 m, angular resolution approx. 0.93° and scanning at 10 Hz, UART interface for easy integration and low typical consumption of 1 W.
137.08 RON
12V adjustable undervoltage relay module
Low voltage disconnect relay module, 12V, adjustable
In Stoc
Protects 12V batteries by automatically disconnecting the consumer when the voltage drops below the set threshold, preventing deep discharge, restarts itself when the voltage returns to a safe level, finely adjustable threshold from the multi-turn potentiometer, low standby consumption below 10mA, clear status indication via LEDs, relay for DC loads up to 10A resistive, recommended 5A.
9.90 RON