Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Low voltage control module, panel, battery discharge protection, 12-48V, 20A
Battery protection panel module, automatically disconnects power when voltage drops below the set threshold and reconnects the consumer at the chosen restart voltage. Compatible with 12-48V, controls loads up to 20A, digital display for monitoring and settings, LED for indicating low voltage status, simple two-button adjustment.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Panel module for power interruption in case of low voltage, settable. Its use is indicated to prevent discharge below a certain battery voltage. When the voltage returns to a preset value, the consumer's supply is resumed. It has an indicator LED for the low voltage state and a display for monitoring the voltage and setting the parameters.
Specifications:
Supply voltage: 12VDC
Battery voltage: 6 - 48VDC
Controlled voltage: 5 - 60VDC
Maximum controlled current: 20A
Voltage error: +-0.1V
Dimensions mm: 78 x 43 x 23mm
Model: YX-20A, YIBAI
Operation:
The 2 buttons adjust the settings. The module enters the setting mode by long pressing one of the buttons until the display flashes.
S1 - Low voltage setting: A short press displays the set value for low voltage. Long press until the flashing display enters the setting mode. The two buttons, up and down, are used to set the desired value.
S2 - Restart voltage setting: A short press displays the set value for the consumer's restart voltage. Long press until the flashing display enters the setting mode. The two buttons, up and down, are used to set the desired value. This setting takes effect when the low voltage event occurred and is used to restart the consumer at the preset value.
The module can come as the YX811 or YX815 version, the difference between them being given by the presence of the internal battery connector (see photo no. 3). The module is powered by the battery.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
