Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Li-Ion and Lead-Acid Battery Level Indicator Display Module, 3S-15S, LCD
Displays the battery charge percentage quickly for Li-Ion and lead-acid batteries, direct connection to terminals for real-time monitoring, compatible with 3S-15S and 12-48V systems, LCD with blue backlight visible in any conditions, very low power consumption under 5mA, and good accuracy of approximately ±1%, simple button configuration without software.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The battery charge level display module is a compact, self-contained solution designed for real-time monitoring of Li-Ion and Lead-Acid battery status. This module integrates all measurement and display logic directly into the unit. Connection is made directly to the battery pack terminals, and the blue-backlit LCD immediately shows the remaining battery capacity percentage.
The module supports configurations from 3 to 15 cells for Li-Ion batteries and the equivalent voltage levels for Lead-Acid batteries (12V, 24V, 36V, 48V). The accepted input voltage ranges from 8V to 63V, covering a wide range of applications: electric vehicles, energy storage systems, electric scooters, off-grid photovoltaic systems, or any other application where a fast and reliable visual indication of battery status is required.
The module’s own power consumption is below 5mA, making it suitable for permanent installations without significantly affecting battery capacity.
Measurement accuracy is ±1%, ensuring a correct indication of the charge level. The compact dimensions of 44 x 25 x 16mm allow discreet mounting in panels, enclosures, or directly on the battery.
Battery type and cell count are configured easily by pressing the button on the back of the module, with no tools or software required.
Specifications:
Input voltage: 8 - 63V
Supported Li-Ion cell count: 3S - 15S
Supported Lead-Acid voltages: 12V, 24V, 36V, 48V
Display type: Blue-backlit LCD
Current consumption: < 5mA
Accuracy: ±1%
Dimensions: 44 x 25 x 16mm
Digital interface: No (standalone, no microcontroller)
Configuration mode: Physical button on the back of the module
Pinout:
| Wire | Description |
|---|---|
| Red | VCC |
| Black | GND |
Usage:
Identify the positive terminal and the negative terminal of the battery pack.
Connect the module’s red wire to the positive terminal of the pack.
Connect the module’s black wire to the negative terminal of the pack.
On first use, press the button on the back of the module to select the battery type (Li-Ion, code C, or Lead-Acid, code P) and the number of cells corresponding to your configuration, according to the code table below.
The display will turn on automatically and show the remaining battery capacity percentage.
On subsequent uses, the module starts and displays the charge level automatically, without requiring any new configuration.
Warning: Do not reverse the wire polarity, as incorrect connection may permanently damage the module. The battery pack voltage must always match the cell configuration selected in the module. Do not connect the module to packs with voltages above 63V.
Configuration Codes:
| Li-ion battery | Code | Lead-acid battery | Code |
|---|---|---|---|
| 3 cells | 3 C | 12V | 1 P |
| 4 cells | 4 C | 24V | 2 P |
| 5 cells | 5 C | 36V | 3 P |
| 6 cells | 6 C | 48V | 4 P |
| 7 cells | 7 C | — | — |
| 8 cells | 8 C | — | — |
| 9 cells | 9 C | — | — |
| 10 cells | 10 C | — | — |
| 11 cells | 11 C | — | — |
| 12 cells | 12 C | — | — |
| 13 cells | 13 C | — | — |
| 14 cells | 14 C | — | — |
| 15 cells | 15 C | — | — |
Connection:
Dimensions diagram:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
