Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
IRF540N module, 4 channels, 5V
4-channel MOSFET module for safe control of DC loads such as LED strips, motors or electronic modules, compatible with Arduino and other boards. It operates at 5V supply and accepts 3.3-5V signal, the channels activate at HIGH, has PS2801-4 optoisolation with common GND and status LED on each channel, supports up to 100V and 10A per channel.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
IRF540N Mosfets module, compatible with Arduino and other development boards.
This module offers four independent channels, each capable of controlling a different DC circuit such as LED strips, electronic modules, motor speed, etc.
There are 4 inputs on the module, each with power pins (Plus and Minus) at 5VDC and a Signal Pin for each channel.
The control side and the signal side are galvanically separated, which is why the board can be used safely without the risk of damaging the logic circuit. Note that the GND is common.
It has a control LED for each channel and all channels are powered by a common input line. The channels are activated by a HIGH signal on the signal pin.
Note: The module is not suitable for controlling AC circuits.
Specifications:
Supply voltage: 5VDC
Logic voltage (signal): 3.3 - 5V
Modfet Activation: HIGH Signal
Mosfet: IRF540
Recommended consumer voltage: > 9V
Maximum supported consumer voltage: 100V
Maximum supported current consumption: 10A per channel maximum
Compatibility: DC circuits
Applications: LED strip control, electronic modules, motors, etc.
Optoisolator: PS2801-4
Dimensions: 66 x 66mm
Use:
Connect the load and DC power source to the terminals of each channel, then use the control signal to turn the mosfet switch on or off, depending on the application.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
