Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
GSM GPRS SIM800L Quad Band module plus antenna
Adds GSM GPRS connectivity to Arduino projects and other boards, ideal for SMS, calls and data transfer. Quad band operation, simple communication via TTL serial port without MAX232, automatic start-up and includes antenna for better reception. Status LEDs quickly indicate the presence or absence of signal, 3.7-4.2V power supply and 3.3V.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
GSM GPRS SIM800L Module, compatible with Arduino and other development boards, the smallest gsm module, Quad-band TTL, serial port, with included antenna.
Specifications:
Chip: SIM800L
Input voltage: 3.7 - 4.2V (battery or power supply)
Logic voltage: 3.3VDC (WARNING, NOT 5V TOLERANT!)
Supported networks: Quad-band
No MAX232 needed, having TTL serial port, connects directly to the development board.
Automatic boot
Status indicator LEDs: slow blink when signal is present, fast blink when signal is absent
Connection:
A voltage divider is required on the RX pin when used with 5V development boards!
IMPORTANT! The RX pin of the SIM800L module requires a 3.3V signal! When used with 5V boards, it needs a logic level converter! Otherwise, you will not see responses to AT commands and risk damaging the module!
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
Functioneaza perfect cu rpi, chiar daca antena pare anemica, semnalul este la 35% intr-o zona in care se poate vorbi la telefon doar agatat de gard. Testat cu vodafone ca modem sms.
Foarte buna calitate, servire ireprosabila.Multumesc.
