Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
ESC BLHeli, 30A, with UBEC, for radio models and drones, 2-4S, 16.8V
Electronic speed controller for brushless motors, ideal for quadcopters, fixed wings and FPV drones, offers 30A continuous and up to 40A peak for safe accelerations. BLHeli firmware ensures fast response and smooth control, and UBEC 5V 3A stably supplies the model's electronics. Compatible with 2-4S LiPo, programmable via FC or card.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
30A BLHeli ESC for brushless motors, specially designed for Quadcopters, Model Airplanes, Fixed Wing and Multi-axis RC FPV Drones. This Electronic Speed Controller (ESC) is created to provide reliable and high-efficiency performance, being designed to work in harmony with brushless motors.
With a continuous current capacity of 30A, this ESC can handle demanding maneuvers and long flight sessions, ensuring your model has the power it needs when it matters most.
The integrated 5V/3A UBEC provides a stable power source for the RC model's electronics, eliminating the need for additional power supplies and simplifying setup.
Designed to be universally compatible with various aircraft models, including quadcopters, fixed wings, and multi-axis DIY FPV drones, giving you the flexibility to use this ESC in multiple projects.
Featuring BLHeli firmware, this ESC provides fast command response and optimization for a variety of brushless motors, improving flight performance.
The ESC is fully programmable, allowing you to customize settings to perfectly match the specific requirements of your model.
It includes a series of electrical protections, such as overheating protection, signal loss protection and overload protection, ensuring safe and long-lasting operation.
Specifications:
Continuous Current: 30A
Maximum Current (Peak): Up to 40A (10 seconds)
Input Voltage: 2-4S LiPo / 5-12 cells NiMH, 16.8VDC Maximum
BEC: 5V/3A (UBEC Mode)
Signal Frequency: 50-432Hz
Processor: SiLabs C8051F330
Firmware: BLHeli
Dimensions: 52 x 26 x 7mm
Weight: 28 grams, including wires
Protections: Overheating, signal loss and overload
Programming Capability: Via FC or Programming Card
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
