Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Display LCD 2.8, TFT, Color, Shield UNO and Mega, Touch, SD, ILI9341
2.8 inch TFT color display with resistive touch and microSD slot, usable as a shield on Arduino UNO and Mega boards, ideal for graphical interfaces, menus and data display in embedded projects. Offers 240x320 resolution, 65K colors with ILI9341 driver, 8-bit parallel interface for fast response and integrated regulator for 3.3-5V.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
2.8 inch LCD display with touch and SD card that can be used as a shield on UNO and Mega development boards.
This display is one with resistive type touch. The integrated voltage regulator ensures compatibility with operating voltages between 3.3 and 5VDC.
Specifications:
Power supply from UNO, Mega or other compatible boards, 3.3V or 5V
Resolution: 240 x 320 pixels
Display: Color
Colors: 65K RGB 16-bit
Display size: 2.8 inches
Screen type: TFT
Driver IC: ILI9341
Interface: 8-bit Parallel BUS
Backlit lighting: LED
Pins:
1 - LCD_RST : LCD bus reset signal, low level reset
2 - LCD_CS : LCD bus chip select signal, low level enable
3 - LCD_RS : LCD bus command / data selection signal, low level: command, high level: data
4 - LCD_WR : LCD bus write signal
5 - LCD_RD : LCD bus read signal
6 - GND : Power ground
7 - 5V : 5V power input
8 - 3V3 : 3.3V power input, this pin can be disconnected
9 - LCD_D0 : LCD 8-bit data Bit0
10 - LCD_D1 : LCD 8-bit data Bit1
11 - LCD_D2 : LCD 8-bit data Bit2
12 - LCD_D3 : LCD 8-bit data Bit3
13 - LCD_D4 : 8-bit LCD data Bit4
14 - LCD_D5 : LCD 8-bit data Bit5
15 - LCD_D6 : 8-bit LCD data Bit6
16 - LCD_D7 : 8-bit LCD data Bit7
17 - SD_SS : SD card SPI bus chip select signal, low level enable
18 - SD_DI : SD card SPI bus MOSI signal
19 - SD_DO : SD card SPI bus MISO signal
20 - SD_SCK : SD card SPI bus clock signal
External references:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
