Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DC current detection relay module, with display, 12V, 0-10A
Monitors DC current and automatically controls a load, ideal for protection, automation and consumption control. Measures 0-10A with 0.01A resolution, display with shutdown for low consumption, calibration for error correction, integrated relay for switching up to 5A on 12V line powered directly from the module.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
DC current detection module with relay, with a detection range of 0~10A and an accuracy of 0.01A. It has an error calibration function and can reduce power consumption by turning off the display. The standby current is about 20mA. It has an output relay that can control the closing or opening of the DC line within the limits of 5A, which means that the module has a built-in relay that can switch a direct current (DC) line. This relay can activate (close the circuit to allow current to pass) or deactivate (open the circuit to stop current to pass) an electrical load on this line, with a switching capacity of up to 5 amps, meaning that it can handle devices or components that consume up to 5 amps without damaging the module or relay.
Specifications:
Supply voltage: 12VDC
Detected current: 0 - 10A
Quiescent current: 20mA
Relay current: Up to 5A, DC current
Configuration instructions:
When turned on, it displays the measured current.
The first press of the K1 button lasts over a second to prevent false triggering and displays the adjustment mode.
Repeated presses allow setting the current thresholds I1 and I2.
In standby mode, buttons K2 or K3 allow the error of the measured current to be cleared.
Function description:
P-11: The relay activates when the measured current is greater than I1 and deactivates when it falls below I1.
P-12: The relay remains activated as long as the power is connected, if the current exceeds I1.
P-21 and P-22: Similar, with activation/deactivation at I2 and I1, with the mention that in P-22 the relay remains activated.
P-31 and P-32: The relay activates when the current is below I1 and deactivates or remains activated, respectively, depending on the variation of the current compared to I2.
P-41 and P-42: Activates the relay when the current is between I1 and I2.
P-51 and P-52: Handles cases when the current is below I1 or above I2 to activate/deactivate the relay.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
