Ramps 1.4 LCD and SD card adapter

In Stoc

Allows you to connect a 2004 or 12864 LCD display with controller to the Ramps 1.4 board, for quick control of the 3D printer without a PC. Includes SD card reader for direct file playback, IDC connectors for simple wiring, compatibility with Marlin and other common firmware, easy assembly and stable integration into the system.

1.68 €

Hotbed arc

In Stoc

Arc hotbed based on Arc ensures uniform and stable heating of the 3D printer bed for better adhesion and reduced deformation. Compatible with adjustable heated bed, it has a compact size of 1.2 x 9.2 x 15 mm, fast thermal response, simple assembly and secure connection, suitable for intensive use in technical projects.

0.99 €

Kapton tape 25m, 10mm

In Stoc

Kapton tape 10mm x 25m is ideal for masking and electrical insulation in high temperature applications, made of polyimide film with silicone adhesive. It withstands up to 260 C continuous and 300 C short term, has excellent heat and solvent resistance, minimal shrinkage after baking and removes cleanly, suitable for PCB, etching, automotive and 3D printers.

2.40 €

Threaded rod guide shaft T8 400mm

In Stoc

T8 threaded rod for Z axis of 3D printers and mini CNC, ideal for smooth and precise movements. It has a diameter of 8mm and a length of 400mm, trapezoidal thread with 8mm pitch and 4 starts for rapid feed, it is usually used with an elastic coupling to the motor to compensate for small deviations.

7.84 €

T8 blocker

In Stoc

Provides firm fixation of an 8 mm guide shaft, preventing slipping and maintaining the position of components in mechanical assemblies. It has an 8 mm internal diameter for precise fit, quick assembly, robust construction for industrial use, supports stable and reliable operation over time.

1.56 €

Heating block e3d v6, MK7/MK8

In Stoc

The E3D V6 hotend heating block, compatible with MK7 and MK8, ensures stable heat transfer for uniform filament melting and consistent 3D printing. Made of aluminum for fast heating and good temperature distribution, it offers secure fixation of the heating cartridge and thermistor, has a standard nozzle thread and allows easy mounting on most DIY configurations.

1.32 €

10-pin ribbon cable, 2X5, 20cm

In Stoc

10-pin 2x5 ribbon cable, ideal for connecting LCD modules to Ramps 1.4 shield in 3D printing and electronics projects. It has a length of 20 cm for flexible mounting, connectors on both ends for quick installation, standard pitch for wide compatibility, flat construction that reduces wiring clutter.

1.61 €

Hotend heating cartridge 12v 40W

In Stoc

Ensures fast and stable heating of the hotend for 3D printers, ideal for maintaining constant temperature during printing. Operates at 12V and 40W for efficient heat transfer, stainless steel housing for durability, cartridge format with 6mm diameter and 20mm length for standard mounting, 100cm cable for easy connection.

1.99 €

Out-of-Stock

90 degree aluminum corner 20x20 mm

Out-of-Stock

Aluminum corner for precise 90 degree joining of 20x20 profiles, ideal for 3D printer frames and modular structures. Provides stiffening and stable alignment, has a lightweight and corrosion-resistant construction, quickly mounts with 6 x 9 mm oval holes for fine adjustment, compatible with 2020 type profiles.

0.85 €

PC4-01, M10 connector

In Stoc

Pneumatic connector for 3D printers, ideal for securely guiding the 4mm PTFE tube into the E3D print head assembly. It has an M10 thread for firm mounting, push-fit quick release for easy tube insertion, keeps the tube fixed for stable filament feeding, outer thread diameter 9.5mm.

0.86 €

PC4 M6 connector, 4mm, Yellow

In Stoc

Pneumatic connector with M6 thread for 3D printer filament supply systems, ideal for pusher mounting, ensures quick and firm clamping of 4 mm PTFE tube, compact body with 6 mm thread outer diameter for easy integration, yellow finish for quick identification, stable and precise connection.

0.51 €

PC4 connector, M6, ID 4mm

In Stoc

PC4 pneumatic connector with M6 thread for PTFE tube with 4mm outer diameter, ideal for stable filament guidance in 3D printers, usually mounted in the filament pusher, ensures quick push fit fastening, firm grip of the tube without play and good sealing for constant and precise feeding.

0.58 €

Silicone print head protection e3d v6

In Stoc

Silicone cover for the print head, resistant up to 260 degrees C, maintains heat in the heating block for more stable temperatures, protects the heater from deposits and plastic leaks, is quick to install and is E3D V6 compatible. Color varies depending on the batch.

1.66 €

Flexible coupling 5mm*8mm

In Stoc

Provides secure coupling between two shafts with different diameters, ideal for precision transmissions in CNC, 3D printers or automation. Compensates for small misalignments and reduces vibrations, quickly mounts on 5mm and 8mm shafts, has a compact construction with a height of 25mm for confined spaces and helps protect gear components.

1.34 €

2GT belt 10mm

In Stoc

2GT timing belt with fiber insert for rigidity, ideal for precise transmissions in 3D printers, CNC and automation mechanisms. It has 2GT pitch for constant synchronization, 10mm width for stability, is delivered by the meter and is continuously cut to the ordered length, so that several pieces in the basket come in a single length.

2.54 €

Print Head Nozzle 0.2mm , MK8

In Stoc

Ideal for high-precision 3D printing, this 0.2mm MK8 nozzle delivers precise detail and even layering. Compatible with MK8 extruders, it ensures stable filament flow, good tolerances for consistent results, and is suitable for small prints, text, and models with fine details. The durable construction withstands repeated use and quick changeover.

0.96 €

Print Head Nozzle 0.3mm , MK8

In Stoc

Bronze nozzle for 3D printing head, ideal for precise extrusion and fine details. 0.3 mm orifice provides cleaner layers, M6 thread ensures quick assembly, is compatible with MK8, MK7, E3D V5 and E3D V6 extruders, works with 1.75 mm filament.

0.96 €

Milling cutter for PCB and engravings 0.1mm

PCB and engraving cutter 0.1mm

In Stoc

Tungsten carbide cutter for precise circuit tracing on PCBs and fine engraving in wood or metal, ultra-thin 0.1mm tip for clear details, 10 degree angle for controlled cutting, standard 3.175mm shank compatible with most CNC and mini routers, 33mm length for stability while working.

3.09 €

2GT timing pulley 20 teeth, 8mm, 10mm belt

In Stoc

Provides precise and silent transmission in GT2 belt systems, ideal for 3D printers, CNC and positioning mechanisms. It has 20 teeth for constant meshing, 8mm bore for stable shaft mounting, compatible with 10mm belt, overall length 19.5mm for easy integration into compact assemblies.

1.35 €

Hotend extruder neck v6

In Stoc

V6 hotend neck for E3D extruder, designed for precise filament guidance and constant feeding in 3D printing. It has PTFE tube inside for 1.75 filament, M6 thread on the hotend and M7 thread compatible with E3D radiator, ensures quick assembly and good sealing, suitable for upgrade or replacement in V6 assemblies.

0.71 €

Complete kit e3d v6, Bowden, 12V

In Stoc

Complete e3d v6 type kit for Bowden configurations on 3D printers, ideal for long distance power supply and stable extrusion at 12V. Includes heating block with 40W cartridge and thermistor for precise temperature control, 0.4 mm nozzle for balanced prints, radiator with fan for efficient cooling, plus pneumatic connectors and Teflon tube for safe filament guidance.

11.04 €

Complete kit e3d v6, direct, 12V

In Stoc

Complete kit for direct extrusion 3D printers, ideal for stable melting and precise printing. Operates at 12VDC, includes heating block with 40W cartridge and thermistor for good temperature control, 0.4 nozzle for balanced details, heatsink with fan and support for efficient cooling and reduced clogging.

10.05 €

J-Head 2 in 1 extruder kit, Bowden, mixed colors

In Stoc

Allows mixing of two colors in a single print head, ideal for gradient effects in Bowden configurations. Includes common hotend with a single thermistor and a single heater, 12V 40W heater for stable heating, requires connection to two stepper motors and firmware modifications, teflon tube to the motor is not included.

11.18 €

Filament pusher kit 1.75, MK8, metal, Right

1.75 filament pusher kit, MK8, metal, Right

In Stoc

Full metal filament pusher for Bowden extruder, ensures stable and precise feeding for 1.75 mm filament, MK8 compatible, right-hand drive according to the assembly in the picture, constructed of aluminum for rigidity and wear resistance, yellow or brown finish depending on the batch.

6.23 €

LCD + Control + SD Card for Ramps 1.4

In Stoc

LCD panel with controller and SD card reader for 3D printers, allows direct operation and monitoring without a PC. Offers easy navigation through menus, starting and managing prints from SD card, clear display of parameters and complete interface with encoder and buttons. Connection to Ramps 1.4 is quick with the included adapter and cables.

14.23 €

RRD Ramps 1.4 module

In Stoc

2-channel PWM expansion module for Ramps 1.4, ideal when after upgrading to dual extruder you no longer have free PWM outputs or you want to add fans, LEDs and other controlled accessories. Mounts directly on servo pins, adds channels on D6 and D11, supports up to 20VDC and 0.5A per channel, compatible with Marlin by setting MOTHERBOARD 34.

2.43 €

5V 28BYJ48 stepper motor, with reducer

In Stoc

Ideal for precise drives in Arduino projects, robots or compact mechanisms, this 5V stepper motor with reducer offers high torque in a small size and smooth movements. It works in 4-phase or 2-phase, has a 5-wire connection, 5.625 x 1/64 pitch with 1/64 reduction for precise control, compatible with ULN2003 driver. Dimensions 43 x 30 x 29 mm.

2.04 €

Stepper Motor, Nema17, 1.8 degrees, 1.5A, 42x42x34mm

Out-of-Stock

Stepper Motor, Nema17 1.7A, 1.8 degrees, 42x42x40mm

Out-of-Stock

Stepper motor for precise axis drive on 3D printers and CNC routers, compatible with A4988 and DRV8825 drivers. Offers 1.8 degree step for fine control, 1.7A current per phase with 2 phases for stable torque, 40N.cm holding force for secure positioning, compact 42x42x40mm format suitable for integration into standard assemblies.

11.47 €

Nut for Hotbed M3

In Stoc

Knob nut with M3 thread for quick bed level adjustment on 3D printers, used together with M3 screw and spring for fine and stable adjustments. It rotates easily by hand due to the serrated edges, provides a secure grip, is made of stainless steel for wear and corrosion resistance, suitable for hotbed.

1.20 €

Out-of-Stock

Aluminum profile 2020 V-Slot, 10cm

Out-of-Stock

Extruded aluminum profile 2020 type V-Slot, ideal for CNC frames and 3D printers, 20x20 mm section, compatible with V-Slot rollers and accessories, rigid and easy to assemble, technical finish. The price is for 10 cm, add to cart multiple of 10 cm, the desired details can be noted in the Comments field, manual cutting with a tolerance of up to 2 mm, there may be fine handling scratches.

0.79 €

5mm filament gear wheel, 26 teeth

In Stoc

Brass gear wheel for 5mm shaft on Nema17 motors, ensures constant filament push to the extruder for precise feeding on 3D printers. It has 26 teeth for good adhesion and efficient torque transfer, compatible with MK7, MK8 extruders and Bowden systems, wear-resistant metal construction, quick assembly on the shaft.

1.20 €

5mm filament gear wheel, 40 teeth

In Stoc

The 5mm shaft brass gear, compatible with Nema17 motors, ensures constant and precise filament pushing to the extruder for stable 3D printing. It has 40 teeth for good filament grip, wear-resistant construction, quick assembly on the shaft, suitable for MK7, MK8 extruders and Bowden systems.

0.73 €

POM V-Slot Roller

In Stoc

The POM V-Slot roller for 20x20 aluminum profiles ensures smooth and precise sliding on CNC axes and 3D printers. Includes 2 625zz bearings for stable rolling and low friction, has an inner diameter of 5 mm and an outer diameter of 23.89 mm, thickness of 10.23 mm, wear-resistant material for long-term use.

1.63 €

Sealed bearing KFL08

In Stoc

Suitable for axis guides with 8 mm threaded rods, it provides stable support and precise alignment in CNC, 3D printer or automation applications. It has an 8 mm internal diameter for quick mounting, robust zinc die-cast housing, encapsulated construction for protection against dust and wear, smooth operation with reduced vibrations.

1.75 €

Inductive proximity sensor SN04-N, NO, 10-30V, NPN

In Stoc

3-wire NPN inductive sensor, ideal for non-contact detection of metal parts in automation and machinery. Switches on proximity up to 5mm and lights up the red LED for visual confirmation. NO operation, NPN output for easy integration at 10-30VDC, IP67 dust and water resistant housing, can also detect through thin non-metallic materials.

3.27 €

Mini drill set, 0.1-1.0mm , 10 pieces

In Stoc

Set of 10 mini tungsten steel drill bits, ideal for making fine holes in PCBs with CNC or MiniCNC milling. Covers diameters from 0.1 to 1.0 mm, has a standard 3.175 mm shank for precise clamping, 38 mm length for drilling stability, delivered in a plastic case for organization and protection.

3.82 €

T8 nut set, anti backlash, with spring, pitch 8mm

In Stoc

An effective upgrade for precise movements on T8 leadscrew axes, the two spring nuts compensate for play and reduce backlash, providing an affordable alternative to ball nuts, suitable for Mini CNC kits. 8 mm pitch, 4-start trapezoidal thread, brass body, 4-hole M3 mounting for stable mounting.

2.10 €

CNC Shield v3 Arduino UNO

In Stoc

The CNC Shield v3 for Arduino UNO is the practical base for controlling a CNC or 3D printer, offering 4 slots for A4988 or DRV8825 drivers, 12-36V power supply and dedicated pins for motors, limit switches and peripherals. It allows setting microstepping via jumpers and works great with GRBL firmware for precise automation projects.

3.49 €

Shield Ramps 1.4

In Stoc

Mega 2560 compatible shield for CNC projects and 3D printers, provides stable control for up to 5 motor drivers and supports dual extruder and heat bed configurations. It operates at 12-24VDC, includes jumpers for setting the drivers' microstep and allows the connection of an LCD with offline printing option from SD card.

6.47 €

Cable protection spiral, 1M

In Stoc

Ideal for organizing and protecting cables in technical applications, the flexible spiral allows for quick grouping of wires and adaptation to variable diameters. It has a black color, length 1 m measured slightly stretched, approximately 90 cm unstretched, can be easily continued by adding to the basket in multiples of 1 for longer sections.

0.43 €

SK8 guide axle support

In Stoc

Support for precise fixation of 8 mm guide axes in CNC applications, 3D printers and linear mechanisms. Rigid aluminum body for stability, firm screw fastening for quick assembly, constant rod alignment for smooth movement, resistant to vibration and wear in industrial use.

1.82 €

NTC thermistor 100k

In Stoc

NTC thermistor with wire and glass head for precise temperature measurement of heating cartridges for 3D printers, 100K Ohm at 25C with 1% accuracy, supports up to 300C in the range -40 to +300C, 1m cable for flexible mounting, model NTC 3950 with 2mm head for fast response.

1.92 €

Components and Parts