Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Color OLED display, 1.5 inch, RGB, SSD1351
1.5 inch color OLED display for clear graphics display in projects with Arduino, Raspberry Pi, STM32 and other boards, compatible with 3.3V and 5V. The OLED panel without backlight offers high contrast and deep black, 128x128 resolution and up to 262k RGB colors. SSD1351 controller and 7-pin SPI interface ensure fast integration and stable communication.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Full color OLED display, RGB, which uses the integrated SSD1351, compatible with Arduino, Raspberry, STM32 and other development boards on both 5V and 3.3V.
This display uses OLED technology where the pixels light up individually without the need for backlighting the display (no backlight). Each pixel lights up individually, increasing the contrast and providing an intense black color (on black, the respective pixels are turned off).
Specifications:
Supply voltage: 3.3 - 5VDC
Working voltage: 3.3 - 5VDC
Resolution: 128 x 128 pixels
Display size: 1.5 inches
Colors: RGB
Number of colors: 262,000 (262k)
Display driver: SSD1351
Number of pins: 7
Interface: SPI
Dimensions mm: 40 x 35mm
Dimensions mm active screen: 26.85 x 26.85mm
Dimensions mm pixel: 0.07 x 0.21mm
Pins:
GND - GND or minus power supply
VCC - 3.3 or 5VDC, power supply plus
SCL - Clock
SDA - Date
RES - Reset, required every time the display is powered
DC - Data / Demand
CS - Chip Selector
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
