Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
CC1101 wireless transceiver module + SMA antenna, 433MHz
CC1101 wireless module with SMA antenna for RF communications in the ISM band 433MHz, ideal for Arduino and other development boards. Offers programmable frequency 387-464MHz via SPI, stable transmission with CRC and RSSI measurement, support for 2-FSK, GFSK and MSK modes, low standby power with WOR.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
CC1101 wireless transmission and reception module with SMA antenna compatible with Arduino and other development boards. This module operates in the sub-1GHz bandwidth, 433MHz, and is especially designed for ISM (Industrial, Scientific and Medical) and SRD (Short Range Device).
The operating frequency is 433MHz, but it can be programmed to operate at other frequencies in the 387-464MHz range.
It integrates hardware CRC error detection for efficient data transmission and supports RSSI signal strength detection.
The baud rate, power, frequency (programmable via SPI), and other parameters are configurable.
The WOR function can be set to standby for low power consumption using a timer.
Fast frequency synthesizer with a suitable frequency hopping system.
Specifications:
Supply voltage: 1.8 - 3.6V
Maximum instantaneous operating current: 30mA
Maximum transmission power: 10mW (+10dBm)
Band: 433MHz ISM band
Modulation support: 2-FSK, GFSK, and MSK
Receiver sensitivity: -110dBm at 1200 baud
Minimum operating speed: 1.2kbps, maximum 500kbps
Buffer: Separate 64-byte RX and TX data FIFO
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
