Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
ADC current acquisition module, N46IB02, 4-20mA, RS485
2-channel 4-20mA current acquisition module, ideal for sensor monitoring and integration into industrial automation. Communicates via RS485 Modbus RTU with functions 03 and 06, allows the connection of up to 247 devices on the same network. Provides accurate 1% measurement with 0.1mA resolution and operates at 8-25V for flexible integration.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Analog current acquisition module, which offers two channels for current measurement in the 4-20mA range. It is ideal for automatic industrial applications and automation systems, offering monitoring through the RS485 communication interface. The module supports RTU instructions and can manage function codes 03 and 06, allowing the connection of up to 247 modules in parallel on the same communication interface.
It supports an operating voltage from 8 to 25V and an operating current between 9 and 13mA, offering versatility for integration into various system configurations. The current measurement on each channel is done with an accuracy of 1%, and the current resolution is 0.1mA. It allows calibration if the error exceeds 1%, thus ensuring precision and reliability in measurements.
Specifications:
Operating Voltage: 8-25V
Operating Current: 9-13mA
Number of Channels: 2 (4-20mA)
Supported RTU Function Codes: 03 and 06
Current Measurement Range: 0-25mA
Resolution Current: 0.1mA
Measurement accuracy: 1% (calibrable if the error > 1%)
Connection Capacity: Supports up to 247 devices in parallel under RTU instruction mode
Use:
Connect the operating voltage between 8 and 25V to the module.
Ensure the correct connection to the table to avoid measurement errors.
Connect the module to your system through the RS485 interface on pins B- and A+.
Configure device addresses to allow network communication.
Use a PLC or computer serial terminal to input the RTU instructions.
Configure function codes 03 and 06 according to system requirements.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
