Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
3.5 inch TFT LCD Display, ILI9486, 480x320, Arduino compatible
The 3.5 inch TFT LCD module for Arduino Mega 2560 offers clear color display for graphical interfaces, menus, and data, with a resolution of 480x320 and 65K colors. The ILI9486 controller accurately renders text and graphics, the 16-bit parallel interface ensures fast refresh, and the integrated 5V to 3.3V logic level conversion allows direct connection. It includes a microSD slot for loading images and content.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The 3.5-inch TFT LCD display module is a compact and versatile solution for projects based on the Arduino Mega 2560 board, offering a clear and colorful image thanks to the 480x320 pixel resolution and the 65K color RGB panel.
The ILI9486 controller ensures faithful rendering of graphics and text, and the 16-bit parallel interface guarantees fast data transfer to the screen.
The module features an integrated 5V/3.3V logic level conversion circuit, making it compatible with both 5V and 3.3V platforms without the need for additional components.
It connects directly to the pins of the Arduino 2560 board, plug-and-play, without cables or adapters. On the back of the module, there is an SD card slot accessible via SPI interface, useful for storing images or display data.
It is important to note that this module does not include a touch function and is intended exclusively for content display.
Specifications:
Screen diagonal: 3.5 inch
Panel type: TFT
Controller: ILI9486 / ILI9488
Resolution: 480x320 pixels
Colors: RGB 65K
Interface: 16-bit parallel
Operating voltage: 5V / 3.3V
SD card slot: yes (SPI interface)
Touch function: no
Compatibility: Arduino Mega 2560
Active area: 73.44 x 48.96 mm
PCB dimensions: 96.6 x 60.3 mm
Pinout:
| No. | Pin | Description |
|---|---|---|
| 1 | 5V | Positive power supply |
| 2 | 5V | Positive power supply |
| 3 | DB8 | Data bus bit 8 |
| 4 | DB9 | Data bus bit 9 |
| 5 | DB10 | Data bus bit 10 |
| 6 | DB11 | Data bus bit 11 |
| 7 | DB12 | Data bus bit 12 |
| 8 | DB13 | Data bus bit 13 |
| 9 | DB14 | Data bus bit 14 |
| 10 | DB15 | Data bus bit 15 |
| 11 | DB7 | Data bus bit 7 |
| 12 | DB6 | Data bus bit 6 |
| 13 | DB5 | Data bus bit 5 |
| 14 | DB4 | Data bus bit 4 |
| 15 | DB3 | Data bus bit 3 |
| 16 | DB2 | Data bus bit 2 |
| 17 | DB1 | Data bus bit 1 |
| 18 | DB0 | Data bus bit 0 |
| 19 | RS | LCD register/data select |
| 20 | WR | LCD write signal |
| 21 | CS | Active low screen select |
| 22 | RST | Active low LCD reset |
| 23 | NC | Not connected, reserved |
| 24 | NC | Not connected, reserved |
| 25 | NC | Not connected, reserved |
| 26 | F_CS | SPI flash select |
| 27 | NC | Not connected, reserved |
| 28 | NC | Not connected, reserved |
| 29 | NC | Not connected, reserved |
| 30 | NC | Not connected, reserved |
| 31 | MISO | SPI input data |
| 32 | MOSI | SPI output data |
| 33 | CLK | SPI clock |
| 34 | SD_CS | Active low SD card select |
| 35 | GND | Ground |
| 36 | GND | Ground |
Usage:
Before assembling, check that the board used is an Arduino Mega 2560, as the module is not directly compatible with Uno or Nano type boards.
Align the module's 36-pin connector with the corresponding header on the 2560 board and press firmly until fully seated.
Power the board via USB or external source; the module receives voltage directly through the connector.
Download the Arduino-compatible library for the ILI9486 (for example MCUFRIEND_kbv or Adafruit_TFTLCD) and install it in the Arduino IDE via Sketch > Include Library > Add .ZIP Library.
Open an example from the installed library and verify that the driver ID is set to 0x9486.
Upload the sketch to the board and check for correct display of the test image.
For SD card usage, use the SD.h library included in the Arduino IDE and set the SD_CS pin according to the pinout above.
Ensure that the files on the SD card are formatted as FAT32 for maximum compatibility.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
