Compatible development board WeMos D1 Mini, ESP8266, ESP-12F
zoom_out_map
chevron_left chevron_right

Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

WeMos D1 Mini, ESP8266, ESP-12F compatible development board

Compact development board with ESP8266 and WiFi, ideal for IoT projects and fast automation. Powered at 5V via MicroUSB, operates at 3.3V logic, has 4MB Flash and CH340G USB interface for easy programming. Offers 9 digital pins, 1 analog input and support for Arduino IDE or LUA code.

24.97 RON Tax included

20.64 RON Tax excluded

(5/5) out of 14 total ratings
Read the reviews
1-2 zile
check In Stoc
Close

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
FAST DISPATCH 24H
We ship from our stock within 24H
LOYALTY POINTS
You earn points with every order, worth 5%.

NodeMCU compatible development board, Wemos D1 Mini compatible, Arduino IDE compatible ESP12F, which includes Wifi connectivity.

The board is powered at 5V but works at 3.3V and can be powered with both tennis shoes. Working at a logic voltage of 3.3V, the board does not allow connecting a signal higher than 3.2VDC to the analog pin.

The board can execute LUA codes but is also compatible with Arduino IDE. For compatibility with Arduino IDE, see the tutorial here .

Specifications:

Supply voltage: 5VDC

Operating voltage: 3.3V

Chip: ESP8266, 32 bit

USB chip: CH340G

Frequency: 26MHz

Flash memory: 4MB

RAM memory: 160KB

Connector: MicroUSB

Analog Pins: 1 (input), MAX 3.2V

Digital Pins: 9 (input, output) + 2 (rx, tx)

PWM Pins: 8

22180

Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.

Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.

Avertismente generale de siguranta:

Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.

Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.

Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.

Nu lasati produsul alimentat nesupravegheat in timpul testelor.

Produsul nu este jucarie si nu este destinat copiilor.

Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.

Identificare produs:

Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.

Producator / Importator / Distribuitor:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Website: www.sigmanortec.ro

Persoana responsabila in UE:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Documentatie si siguranta:

Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].

You might also like
Customers who bought this product also bought:
Viewed products