Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Voice recognition module, SRVR, V3
Voice recognition module for Arduino and other boards, ideal for controlling projects via voice commands. Supports up to 80 learned commands and recognizes up to 7 simultaneously, is fully controlled via serial port or simplified via input pins, and GPIO outputs can generate signals for automatic actions. Includes microphone and operates at 5V with low consumption.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Voice recognition module compatible with Arduino and other development boards.
This is a voice command recognition module, which supports up to 80 voice commands and up to 7 simultaneous commands.
In order for the module to work, it must be taught to recognize a certain sound or word that will be associated with the desired command.
The board has 2 control methods: through the Serial Port (all functions) or through the INPUT pins (partial functions).
OUTPUT pins can generate different forms of signal, corresponding to the voice command for which it was trained.
The module comes with a microphone. Used together with Arduino and an SD card reader module, a loudspeaker can be attached for audio feedback to voice commands (see the picture below).
Specifications:
Supply voltage: 4.5 - 5.5VDC
Operating current: below 40mA
Logic voltage: 5V
Digital interface: GPIO and TTL level for the UART interface
Analogue interface: 3.5mm mono channel microphone connector plus pin interface
Recognition accuracy: 99% under ideal conditions
Dimensions mm: 31 x 50mm
Login example:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
