UART USB Programmer, ESP-01, ESP-8266
zoom_out_map
chevron_left chevron_right

Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

UART USB Programmer, ESP-01, ESP-8266

USB-UART programmer for ESP-01, ESP8266 modules, ideal for fast firmware upload and testing. It has an 8-pin connector with a pitch of 2.54 mm, easy access to GPIO0 for entering programming mode, communicates stably via CH340G and provides power from USB 5V with conversion to 3.3V on the board. Compact size, easy to integrate on the workbench.

9.10 RON Tax included

7.52 RON Tax excluded

(4/5) out of 9 total ratings
Read the reviews
1-2 zile
check In Stoc

Shipping by Thursday 27 August

Close

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
FAST DISPATCH 24H
We ship from our stock within 24H
LOYALTY POINTS
You earn points with every order, worth 5%.

USB programmer for ESO-01, ESP-8266, 8 pins (2.54 space between pins).

This product is designed for programming ESP-01 modules and provides convenient access to the GPIO0 pin.

Based on USB-UART CH340. It uses the integrated CH340G for communication with the computer, which allows USB to serial communication.

It requires the addition of a large capacitor of at least 1000uF to keep the voltage fixed at 5V.

Use:

To bring the ESP-01 module into programming mode, it is necessary to connect GPIO0 with GND

Specifications:

Used with Arduino ESP8266 platform for Arduino IDE

33222

Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.

Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.

Avertismente generale de siguranta:

Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.

Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.

Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.

Nu lasati produsul alimentat nesupravegheat in timpul testelor.

Produsul nu este jucarie si nu este destinat copiilor.

Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.

Identificare produs:

Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.

Producator / Importator / Distribuitor:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Website: www.sigmanortec.ro

Persoana responsabila in UE:

Sigmanortec S.R.L.

Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania

E-mail: [email protected]

Documentatie si siguranta:

Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].

Customers who bought this product also bought:
Viewed products