Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Smoke extractor, with fan, carbon filter, 220VAC, BST-493
Soldering fume extractor, with integrated fan and easy-to-replace active carbon filter, effectively reduces fumes and flux odors. Positioned on the table close to the source, side suction with low noise, has adjustable angle and stable metal base. 100-240VAC power supply, ABS housing with metal elements, rear exhaust or duct.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Smoke extraction device that integrates an active carbon filter that can be changed. It uses a fan to extract the smoke produced in the soldering process and the filter is effective against the smoke released by the flux and other solutions used in tinning.
It is equipped with a base made of metal legs and the angle of the device can be adjusted.
The device is positioned on the table as close as possible to the place of smoke release and it sucks in the side efficiently and with a low noise.
The filtered smoke can be discharged directly behind the fan or an exhaust pipe can be installed.
Note: to be effective, change the filter once every few months.
Specifications:
Supply voltage: 100 - 240VAC
Material: ABS and metal
Dimensions mm: 280 x 195 x 145mm
Filter: Active carbon
Filter dimensions: 130 x 130mm
Content:
1 x Filter device
1 x Active carbon filter
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
