Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
SMD soldering station, AE380D, 80W, 480 degrees, digital display, PID control
Compact SMD soldering and rework station, with fast heating and 80W power for continuous work. PID control with digital display ensures stable temperature up to 480°C, and the one-button adjustment makes setting fast and precise. Includes auto sleep and auto standby for economy, plus sponge holder and brass wool for efficient tip cleaning.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The AE380D SMD soldering station is a compact and ergonomic solution for precision electronics work, designed for fast heating and stable temperature control. For maximum efficiency in service and rework, it includes an integrated 80W tip with fast heat recovery, digital display for clear settings, single-button push or turn control, plus useful features for safe and consistent work.
The auto sleep and auto standby functions increase safety and reduce consumption, and the calibration and temperature lock options are useful when you want consistent results over the long term.
Features integrated sponge holder and tip cleaner.
Features:
- Fast heating, ready to work in seconds
- Precise temperature control via PID and digital display
- Good high temperature stability for clean solder joints
- Advanced heat recovery for continuous operation
- Auto sleep and auto standby function for safety and energy saving
- Temperature lock to prevent accidental changes
- Temperature calibration for accurate results over time
- Small and lightweight design, easy to carry and position on the bench
- Cleaning accessories included, sponge and brass wool, plus letcon holder and float roller holder
Specifications:
Model: AE380D
Manufacturer: ATETOOL
Power: 80W
Power supply: 120VAC or 230VAC
Temperature range: 100 to 500 C
Temperature range F: 212 to 932 F
Display: digital
Heating element: T60 series PTC integrated active ceramic
Temperature stability: ±2 C at temperatures above 200 C
Temperature stability: ±4 F at temperatures above 400 F
Power cable length: 0.9 m
Handle cable length: 1.2 m
Peak to ground resistance: <2 Ohm
Peak voltage to ground: <2 mV
Package: letcon, control unit, sponge, brass wool, user manual
Net weight: 516 g
Packaging dimensions mm: 240 x 120 x 180mm
Use:
Place the station on a stable surface and connect to the appropriate power supply.
Mount the letcon in the holder when not working, for protection and safety.
Wet the sponge before use and squeeze out excess water.
Turn on the station and set the temperature from the knob, turn to adjust and press to confirm, depending on the menu.
Clean the tip periodically, alternately on a damp sponge or brass wool to remove oxide without damaging the tip.
For sensitive SMD components, use a moderate temperature and work quickly, with a clean tip and quality solder.
Activate temperature lock if you work in a repetitive flow to avoid accidental changes.
After work, let the station go into auto standby or turn it off completely, then store the letcon only after cooling.
Content:
Letcon
Main control unit
Cleaning sponge
Brass wool for cleaning
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
