Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
SHT2000 Thermostat Module, 220VAC, Temperature and Humidity
110-240VAC powered temperature and humidity controller, ideal for greenhouses, warehouses and industrial applications, quickly monitors the environment and automatically controls heating or cooling, humidification or dehumidification. Includes external 4-wire wired sensor and two independent relays for two consumers, dual display with different colors and status LEDs, easy 4-button setting, panel mounting on rail.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Temperature and humidity controller (hygrometer), model SHT2000, powered between 110VAC and 240VAC, used for temperature and humidity control, intended for industrial and commercial applications. This module allows the regulation and monitoring of environmental conditions in a variety of scenarios, from greenhouses to warehouses, ensuring the optimization of conditions for food preservation, agriculture or other industrial needs.
The module is equipped with a wire sensor (4 wires), which integrates both the temperature and the humidity sensor, and two separate relays, which allows the activation of two consumers, one connected to the temperature and the other to the humidity.
The assembly is a panel, on the rail. The display is dual, with a different color between temperature and humidity, LED status indicator for both temperature and humidity, and four physical buttons for setting the thermostat.
Depending on how it is set, the thermostat can work in Heating or Cooling, Humidification or Dehumidification mode.
Specifications:
Supply Voltage: AC 110~230V
Model: SHT2000
Control: Temperature and Humidity
Power supply frequency: 50/60Hz
Temperature Range: -20~60°C
Humidity Range: 0%~100% RH
Accuracy of Temperature Measurement: ±0.3 °C
Humidity Measurement Accuracy: ±3%
Output Control: Relay
Output Power: MAX 10A
Dimensions mm: 75 x 34 x 85mm
Use:
Heating mode:
Step 1: In heating mode, the start temperature is set lower than the stop temperature.
Step 2: Press and hold the ▲ button until the temperature starts to flash, set the start temperature to 50°C using the ▲▼ buttons.
Step 3: Press and hold the ▼ button until the temperature stops flashing, set the shutdown temperature to 65°C using the ▲▼ buttons.
Cooling Mode:
Step 1: In cooling mode, the start temperature is set higher than the stop temperature.
Step 2: Press and hold the ▲ button until the temperature starts to flash, set the starting temperature to 30°C using the ▲▼ buttons.
Step 3: Press and hold the ▼ button until the temperature stops flashing, set the shutdown temperature to 26°C using the ▲▼ buttons.
Humidification mode:
Step 1: Press and hold the ▲ button for 3 seconds to make the humidity value flash, and set the starting humidity value to 50% RH.
Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity flashing and set the shutdown humidity to 80% RH.
Dehumidification Mode:
Step 1: Press and hold the ▲ button for 3 seconds to make the humidity value flash, and set the starting humidity value to 40% RH.
Step 2: Press and hold the ▽ button for 3 seconds to stop the humidity flashing and set the shutdown humidity to 70% RH.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
