Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
PTFE tube cutter, 90 degrees
Mini portable cutter for precise 90 degree cutting of PTFE tubes, ideal for 3D printing and replacing the tube end in the hotend area. The V-guide holds the tube correctly, and the triangular stainless steel blade cuts by sliding for a clean section, without deformation. Helps to form a tight seal with the print head, reducing the risk of leaks and blockages.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Mini, portable cutter for cutting PTFE tubes, essential for 3D printing enthusiasts and those working with Teflon tubes.
The device solves the problem of cutting the tube at a 90-degree angle, essential especially when replacing the section of tube that comes into contact with the print head. When joining the print head to the PTFE tube, the 90-degree angle ensures a tight seal that does not allow the filament to come out of the tube.
It uses a stainless steel blade, providing precise and clean cuts, preventing problems such as leaks or clogging of the print head. At the base there is a wider, V-shaped section that keeps the tube in position, and the blade, having a triangular shape, cuts by sliding and does not compress the PTFE tube in the cut area.
Specifications:
Blade material: Stainless steel
Cutting type: "V" shaped alignment
Compatibility: PTFE tubes
Use:
Place the tube on the "V" shaped guide.
Apply even pressure on the cutter to obtain a straight and clean cut.
Avoid using on too hard materials to maintain blade durability.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
