Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Pliers for XH2.54 and PH2.0, SN-01BM
Crimping pliers for XH2.54, DuPont 2.54 male and female, PH2.0 and JST connectors, ideal for battery balance plugs and microcontroller wiring. Crimps cleanly and evenly on 20-28AWG wires, has an easy-to-use mechanism and good tightening control, robust metal construction and a length of 190 mm for comfortable handling.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Crimping and crimping pliers compatible with XH2.54mm plugs, 2.54mm DuPont pins both male and female, PH2.0mm connectors, JST connectors, EPS, PCIE and SATA connectors.
This pliers allows, for example, to crimp battery balance plugs and PH2.0 plugs used in many microcontrollers.
It is easy to use and the pin perfectly clamps cables between 20 and 28AWG.
Specifications:
Model: SN-01BM
Compatible connectors: XH2.54mm , PH2.0mm , DuPont, etc...
Cable sizes: 20 - 28AWG
Material: Metal
Dimensions mm: 190mm length
Use:
Insert the metal pin into the teeth of the pliers, making sure that the part that grips the conductor is in the smaller section of the tooth and the plastic insulation is on the larger part of the tooth (the conductor is tightened more than the insulation.
Tighten the pliers slightly until the pin is fixed in the tooth and insert the cable into the pin.
Tighten the pliers as much as possible and then release the handles.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (1) - Review moderation
Acesta este al III-lea cleste achizitionat care pretinde ca poate sertiza pini XH dupond samd, si singurul care chiar are dintii corecti. Recomand.
