Electric engraving device, with battery, with 2mm heads, Type-C
Electric engraving device, battery-powered, with 2mm heads, Type-C
In Stoc
Cordless electric router for engraving, grinding and fine cutting, ideal for workshops, laboratories or DIY projects. It has USB Type-C charging and internal battery for mobility, 3 speed settings up to 18,000 RPM, 2.35mm bit compatible chuck and LED indicator for speed, battery and load resistance for precise control.
36.23 €
5V relay module, serial control from PC, USB, CH340
5V relay module, serial control from PC, USB, CH340
In Stoc
Allows ON or OFF control of a relay directly from the PC via USB and serial communication, using CH340 and a serial debugging software. It is powered and connected simply from the 5V USB port, has LED to indicate the relay status, the command is done quickly through hex frames at 9600 baud. The relay contacts support up to 250VAC 10A for general automation and test applications.
5.69 €
Powerbank kit, transparent case, QC4.0, PD, 22.5W, 8P
Powerbank kit, transparent case, QC4.0, PD, 22.5W, 8P
In Stoc
Assemble a custom powerbank from 8 18650 cells, with a transparent case and LED display for the charge level. It offers PD fast charging up to 22.5W and QC4.0, can simultaneously power three devices via 2x USB and 1x USB-C. The USB-C port works for both charging and discharging, the kit includes the board, case and mounting accessories.
17.37 €
Time delay mode, multifunctional, 2s-1000h
Time delay module, multifunctional, 2s-1000h
In Stoc
Multifunctional timing module for precise delay control, ideal for turning on/off equipment, activating sensors or triggering alarms after a set interval. It offers a wide time range of 2s-1000h, operates at 5-12V, has compact dimensions of 12x12mm and is easily integrated into DIY and automation projects.
0.50 €
ESP-15F module, ESP8266, Serial, WiFi, 32-bit, 5V
ESP-15F module, ESP8266, Serial, WiFi, 32-bit, 5V
In Stoc
WiFi module based on ESP8266, ideal for quickly connecting Arduino and IoT projects to the 2.4GHz network, interfaces simply via serial UART at 115200 bps, runs on 32-bit architecture with 5V power supply and 3.3V logic, includes PCB antenna for compact installation and supports WEP, WPA, WPA2 security for reliable transmissions.
7.48 €
Temperature and humidity sensor, SHT35, I2C
Temperature and humidity sensor, SHT35, I2C
In Stoc
Advanced module for precise temperature and humidity measurement in Arduino projects and embedded systems, offers stable readings thanks to factory calibration and digital compensation. Communicates simply via I2C with selectable address, operates at 2.4-5.5V and has low power consumption, ideal for weather stations, automation and industrial monitoring.
17.41 €
Kit DIY CHA-81, matrice LED 9x9, efecte grafice
CHA-81 DIY kit, 9x9 LED matrix, graphic effects
In Stoc
DIY kit for assembling a 9x9 LED matrix with graphic effects, ideal for educational projects and interactive prototypes. Includes PCB and all electronic components, mounting and polarity markings are printed on the board for easy soldering. Operates at 5-9V and can be powered by USB or external battery for flexible use.
8.87 €
OLED display module, RGB, 1.5 inch, 65K colors, 6-bit, 128x128
OLED display module, RGB, 1.5 inch, 65K colors, 6-bit, 128x128, SPI, 3.3-5V
In Stoc
1.5 inch RGB OLED display for embedded and IoT projects, offers clear images at 128x128 and up to 65K colors for compact graphic interfaces. It connects quickly via SPI with 3-wire or 4-wire support, operates at 3.3-5V and has low consumption, being compatible with Arduino, Raspberry Pi and STM32.
42.39 €
Glass fuse set, 5x20 and 6x30, 5-20A, 75 pieces, with box
Glass fuse set, 5x20 and 6x30, 5-20A, 75 pieces, with box
In Stoc
Ideal for the quick replacement of blown fuses in electronic devices and equipment, the set includes 75 glass fuses in two sizes, 5x20 and 6x30 mm, with common ratings from 3 to 30A. Each rating comes in 3 pieces for a consistent запас, and the plastic organizer box keeps the fuses neatly arranged and easy to identify.
5.51 €
Advertising Panel Module, RGB Display, 37x9cm, 16x64
Advertising Panel Module, RGB Display, 37x9cm, 16x64, Programmable from the app, 5V
In Stoc
Programmable RGB LED panel for attractive messages in shop windows or on vehicles, with 16x64 resolution on a 37x9 cm surface. It is easily powered at 5V via USB and quickly controlled via Bluetooth from the Android or iOS application. Allows texts, animations and scrolling or flash effects, including logos and images created pixel by pixel. Displays up to 8 characters simultaneously, with scrolling for complete messages.
59.07 €
Set of 6 screw extractors, HSS 4341, 2-12mm
Set of 6 screw extractors, HSS 4341, 2-12mm
In Stoc
Quickly removes broken or damaged screws, the set includes 6 extractors with sizes 2-12 mm for a precise fit, made of wear and deformation resistant HSS 4341 steel, ensures firm grip and efficient extraction by reverse rotation. Comes with a plastic box for tidy storage and transport.
4.09 €
SATA to USB 3.0 cable, 6Gbps, SATA 3, 22 pins
Out-of-Stock
SATA to USB 3.0 cable, 6Gbps, SATA 3, 22 pins
Out-of-Stock
Quickly connect a 2.5 inch SATA HDD or SSD to your PC, laptop or OTG-enabled devices for transfer and backup without a case. It offers USB 3.0 interface with speeds up to 6Gbps on SATA 3, 22-pin SATA connector for data and power, plug and play operation without drivers, integrated LEDs indicate operating status.
6.01 €
RGB LED bar, 3D, sound control, music, VU meter, adjustable
RGB LED bar, 3D, sound control, music, VU meter, adjustable, USB 5V
In Stoc
Instantly create a dynamic atmosphere in the room, synchronizing 3D RGB lighting with music or ambient sounds via the built-in microphone. Quickly controlled from the app via Bluetooth, you can choose colors and effects, adjust brightness and reaction speed. 5V USB power supply for easy use with PC, powerbank or charger.
14.54 €
Voltage-to-frequency converter module 0-10V to 0-10kHz
Voltage to Frequency converter module, 0-10V, 0-10KHz
In Stoc
It converts a 0-10V analog signal into a 0-10 kHz proportional frequency, ideal as a pulse source for drivers and control systems. It operates at 13.5-30VDC, offers OCOUT output for connection to the driver and FOUT for general use, and the integrated potentiometer allows fine voltage-frequency calibration for precise response in the application.
3.49 €
Frequency to voltage converter module 0-1kHz to 0-10V
Frequency to Voltage converter module, 0-1KHz to 0-10V, 13.5-30V
In Stoc
Converts a 0-1 kHz pulse signal into a proportional 0-10V analog voltage, ideal for pulse sensors, encoders and PLC interfacing. It operates at 13.5-30V, has an optically isolated input for protection and immunity to interference, and the output is easily calibrated from the potentiometer for exact matching to the application.
3.47 €
Load module, battery capacity tester, FX35, 35W, 5A, 1.5-25VDC
Load module, battery capacity tester, FX35, 35W, 5A, 1.5-25VDC, with display
In Stoc
Adjustable electronic load for testing the capacity of batteries and DC sources, operates between 1.5 and 25V and allows setting the current up to 5A, dissipates up to 35W with integrated radiator and fan. The display shows voltage, current, power, Ah and discharge time, and the separate 5V power supply via USB reduces measurement errors.
17.59 €
DC 775 motor 24V 21000RPM double bearing 5mm shaft
DC motor 775, 24VDC, 21000RPM, double bearing, 5mm cut shaft
In Stoc
Powerful motor for DIY projects, automation and power tools, operates at 12-20VDC and reaches up to 21000RPM for high torque and speed. Double bearing ensures smooth running and durability, 5mm cut shaft allows secure coupling with sprockets and pulleys, 2 M4 threaded holes and rear fan help with mounting and efficient cooling.
9.50 €
Breadboard MB102, 830 points, Transparent
Breadboard MB102, 830 points, Transparent
In Stoc
Ideal for rapid prototyping without soldering, this board offers 830 points for clear and stable mounting, the transparent housing helps track connections and reduce errors, has 10 power rail connections for tidy power supply, nickel-plated metal contacts for reliable connections, compatible with 0.4-0.7 mm pins and 20-29AWG wires.
3.30 €
TDA7294 audio amplifier module, 12-32VAC, 100W, 1 channel
TDA7294 audio amplifier module, 12-32VAC, 100W, 1 channel
In Stoc
The audio amplifier board with TDA7294 offers up to 100W per channel for 4-8 ohm speakers, is flexibly powered at 12-32VAC from the transformer, plays clearly on the 20Hz-20kHz band, has quick connections via screw terminals for power, input and output, compact format for DIY projects and audio applications.
8.51 €
Portable Smoke Extractor Kit, fan 6015, USB-C, active carbon
PackOut-of-Stock
Portable Smoke Extractor Kit, 6015 fan, USB-C, activated carbon filter
Out-of-Stock
Portable DIY fume extractor, ideal for soldering and electronics work, with 3D printed housing, 60mm fan with good airflow and USB-C power supply. It works with 18650 battery via TP4056 for charging and protection, and the voltage booster provides 12V for the fan. The activated carbon filter is removable and fixes the sponge for quick replacement.
22.32 €
Mini PIR sensor, SR602, motion detection, 3.3-15V
Mini PIR sensor, SR602, motion detection, 3.3-15V
In Stoc
Mini PIR module for motion detection, ideal for automation, security and Arduino projects. It operates at 3.3-15V and offers a safe 3.3V digital output, simply connects on 3 pins. Detects presence up to 5 m, recommended 3.5 m, with a default HIGH time of 2.5 s settable. Can be adapted to work only at night via photoresistor.
1.65 €
DS18B20 temperature sensor adapter module
DS18B20 temperature sensor adapter module
In Stoc
Adapter board for DS18B20 probe that quickly simplifies connection to microcontroller, with screw terminal for secure wire clamping and 2.54mm breadboard compatible pins. Integrates 4.7K pull-up resistor on digital pin and capacitor on power supply for stable operation at 3.3-5V. Includes 3 DuPont female-female wires.
1.19 €
Inverter module 12VDC to 12VAC, 50Hz, 100W, IV1212TA
Inverter module 12VDC to 12VAC, 50Hz, 100W, IV1212TA
In Stoc
It simply converts 12V DC to 12V AC at 50Hz to power low-voltage AC equipment, provides square wave and power up to 100W without cooling or 200W with active cooling, has reverse polarity protection and finely adjustable output frequency, operates with power between 8 and 15V DC.
10.90 €
Portable signal generator, with LCD, SG-003A, 0-10V, voltage
Portable signal generator, with LCD, SG-003A, 0-10V, voltage simulator
Last items in stock
Portable tool for quick troubleshooting in automation, PLCs and instrumentation, generates and measures voltage and current signals and can simulate 0-10V, 4-20mA and PWM. It has a 1.44 inch TFT LCD color screen for clear reading, conversion between signals with real-time monitoring, RS485 interface for connection to PC, 3000mAh battery with USB-C charging.
100.66 €
Expansion terminal for ESP32, 30P
Expansion terminal for ESP32, 30P
In Stoc
The 30-pin ESP32 expansion board brings all your GPIO to screw terminals for quick and secure wiring without soldering. It allows for easy mounting and dismounting of the board, keeps connections stable in prototyping and IoT projects, is compatible with most 2x15-pin ESP32 boards, and provides clear pin access for testing and integration.
3.38 €
Pliers for XH2.54 and PH2.0, SN-01BM
Pliers for XH2.54 and PH2.0, SN-01BM
In Stoc
Crimping pliers for XH2.54, DuPont 2.54 male and female, PH2.0 and JST connectors, ideal for battery balance plugs and microcontroller wiring. Crimps cleanly and evenly on 20-28AWG wires, has an easy-to-use mechanism and good tightening control, robust metal construction and a length of 190 mm for comfortable handling.
23.07 €
Rotary control thermostat, with probe, mechanical, 250VAC, 16A
Rotary control thermostat, with probe, mechanical, 250VAC, 16A, 50-300 degrees C
In Stoc
Mechanical temperature controller with rotary adjustment and probe, ideal for household appliances and industrial equipment, maintains stable temperature through precise switching. Operates at 250VAC and 16A, covers the range 50-300°C, has robust metal construction and ceramic components, includes 70 cm capillary and fast response probe for efficient control.
8.13 €
Short circuit detection atomizer pen, resin, RL-069
Short circuit detection atomizer pen, resin, RL-069
In Stoc
Tool for rapid detection of short circuits on motherboards, vaporizes resin by heating and deposits a white layer that melts on the component that overheats, clearly indicating the defective area. It has a thick glass tank for controlled dosing, power supply with internal rechargeable battery at 5V via MicroUSB, simple activation by 5 presses and precise use on the suspected area.
13.07 €
MG90S servo motor, Aluminum gears
MG90S servo motor, Aluminum gears
In Stoc
Upgrade from classic SG90 and MG90S, with aluminum gears for light weight and strength, suitable for robots, mini arms and RC mechanisms. Offers precise control with internal potentiometer, 0-180 degree rotation, torque up to 2.2 kg/cm at 6V and fast speed up to 0.08 s at 60 degrees, 4.8-6V.
4.06 €
UNO R4 Minima Compatible Development Board
UNO R4 Minima Compatible Development Board
In Stoc
Ideal for rapid prototyping and upgrading from UNO R3 projects, it retains the classic format and pinout, runs at 5V with a wide 6-16V supply, uses an Arm Cortex M4 processor at 48MHz for superior performance, is easily programmed via USB-C and offers extensive connectivity via 12-bit DAC and SPI, I2C and CAN interfaces.
10.71 €
Housing spot welding machine, model 9734
Spot welding machine housing, model 9734
In Stoc
The 3D printed PLA housing, designed for the 9734 spot welding module, provides protection against accidental contact with metal surfaces. It has button extensions for easy access, ventilation in the base and cover for cooling, quick assembly by inserting the module and fixing with the included screws. Black color, compact dimensions 95 x 59.5 x 21 mm.
5.98 €
Human presence sensor, HLK-LD2410, 24GHz, Radar, 5-12V
Human presence sensor, HLK-LD2410, 24GHz, Radar, 5-12V
In Stoc
24GHz radar module for detecting human presence indoors, recognizes moving or stationary people including micro-movements and estimates the distance to the target, covers up to 5 m with a wide detection angle, is powered by 5-12V and easily integrates into smart systems via GPIO or UART outputs, with adjustable parameters for sensitivity and area.
10.65 €
Soldering station, BST-933B, 130W, 50-520 degrees, LCD screen
Out-of-Stock
Soldering station, BST-933B, 130W, 50-520 degrees, LCD screen
Out-of-Stock
Professional soldering station for electronic work, with ultra-fast tip heating in approx. 2.5 seconds and intelligent temperature control for consistent results. Offers 130W with instant boost up to 260W, range 50-520°C and high stability. It has standby sleep function and automatic hibernation, plus quick tip change even when hot, with a sensor that starts heating when the handle is lifted.
309.84 €
Programmable relay, 4CH, 24V, USB serial control
Programmable relay, 4CH, 24V, USB serial control
In Stoc
4-channel relay module for automation and DIY projects, controlled directly from PC via USB, uses HID interface and does not require drivers on Windows 7 and XP, switches loads up to 10A at 250VAC or 30VDC, 24VDC relay power supply with jack or terminal, NC COM NO screw terminals and status LEDs for each channel.
11.03 €
5V relay module, 8 channels, with optocoupler, High and Low
5V relay module, 8 channels, with optocoupler, High and Low trigger settable
In Stoc
Quickly control up to 8 AC or DC loads from Arduino and other 5V boards, with optocoupler isolation for interference and surge protection. Each channel has a selectable High or Low trigger via jumper, NO COM NC terminals for easy integration, requires external 5V power supply to drive the coils, red LED indicates relay activation.
8.97 €
Amplifier module XH-M573, TPA3116D2, 100W, 2.1 channels
Amplifier module XH-M573, TPA3116D2, 100W, 2.1 channels
In Stoc
2.1 digital amplifier on TPA3116D2, ideal for compact audio projects, powers two stereo speakers and a subwoofer for powerful and balanced sound. It has volume, bass and stereo level adjustment, operates at 10-18V DC, offers audio input via AUX 3.5 mm or 3-pin connector, compatible with 4-8 ohm speakers.
21.07 €
Motor Micro 300, 3-6V, 3500rpm
Micro Motor 300, 3-6V, 3500rpm
In Stoc
Ideal for projects powered directly from solar panels, this 3-6V micro motor offers very low consumption and easy starting in small applications. It works with reverse polarity for quick change of direction of rotation, reaches up to 4500 rpm without load and has a compact housing, suitable for solar toys, mini mechanisms and educational experiments.
0.91 €
AC-DC power supply module kit, continuously adjustable, 0-30V
AC-DC power supply module kit, continuously adjustable, 0-30V, 2mA-3A, unassembled
In Stoc
Unassembled kit for adjustable AC-DC power supply, ideal for lab and DIY projects, offers 0-30VDC voltage and 2mA-3A current limitation for controlled power supply of loads. Through-hole components are easy to solder, PCB has clear markings for mounting, includes overcurrent and short circuit protection with LED indicator. Requires 24VAC transformer.
6.79 €
Raspberry Pi 4 case, with 5V fan, transparent
Raspberry Pi 4 case, with 5V fan, transparent
In Stoc
Protective case for Raspberry Pi 4 Model B, provides efficient cooling and protection in daily use. Made of semi-transparent injection-molded ABS, includes stand and 5V 3030 fan for better heat dissipation. Cutouts are perfectly aligned for quick access to ports and slots, and the base with non-slip feet ensures stability on smooth surfaces.
4.61 €
DDS generator module, AD9850, 0-40MHz, 3.3-5V
DDS generator module, AD9850, 0-40MHz, 3.3-5V
In Stoc
DDS generator for Arduino and other boards, ideal for RF testing, laboratory signals and prototyping, allows rapid frequency change through high-resolution digital control, generates sine 0-40MHz and square 0-1MHz, offers 2 sine outputs and 2 square outputs with adjustable duty cycle, operates at 3.3-5V and includes 125MHz active clock.
18.26 €
Raspberry Pi 3B case, with 5V fan, transparent
Raspberry Pi 3B case, with 5V fan, transparent
In Stoc
Protects and cools the board effectively, with durable semi-transparent ABS and perfect access to all connectors. Includes stand and 3030 5V fan for improved heat dissipation in continuous use. The base has an anti-slip design, and the non-slip feet ensure stability on smooth surfaces. Compatible with Raspberry Pi 3B.
3.58 €
Carcasa aparat sudura in puncte, model 9735
Spot welding machine housing, model 9735
In Stoc
3D printed PLA housing for the 9735 spot welding module, provides protection against accidental contact with metal surfaces and reduces the risk of damage. It has 3 holes for easy access to buttons, vents in the base and cover for better cooling, quick assembly by inserting the module and fixing with the cover clamped in the included screws. Dimensions 94 x 64 x 20.5 mm, color black.
5.98 €
Digital stepper motor driver, DM556, 2 phases, 20-50V, 0.5-5.6A
Digital stepper motor driver, DM556, 2 phases, 20-50V, 0.5-5.6A
In Stoc
Digital driver for 2-phase stepper motors, ideal in automation with Nema17 and Nema23, offers smooth and precise movement through configurable microstepping, reduces noise and resonance for stable torque at various speeds, allows quick adjustment of current and settings via DIP switch, supports 20-50V and up to 200kHz, includes auto-configuration and integrated protections.
23.91 €
PWM driver module, TLC5947, 12Bit, 24 channels, 3-5.5V
PWM driver module, TLC5947, 12Bit, 24 channels, 3-5.5V
In Stoc
PWM driver with TLC5947 for precise control of dimmable LEDs and other loads under 30mA, offers 24 independent channels with 12-bit resolution for fluid lighting effects. Operates at 3-5.5V logic, Arduino 3.3V and 5V compatible, communicates serially and automatically maintains the PWM cycle with the programmed values, includes thermal protection for stable use.
15.17 €
Motor 390, 6-24V, 13000rpm, shaft 2.3x14mm
Motor 390, 6-24V, 13000rpm, shaft 2.3x14mm
In Stoc
Compact 390 type motor for DIY micro drilling projects and precision applications, operates at 6-24VDC with 12V recommended and offers speed proportional to voltage up to 26000 rpm. 2.3x14mm shaft for easy coupling to the chuck, 27.6mm housing and 47mm length for integration in small spaces. Easy mounting with 16mm clamps, 100g weight for stability.
5.50 €
Capacitive touch module, 3A, with dimmer, 5-20VDC
Capacitive touch module, 3A, with dimmer, 5-20VDC
In Stoc
Capacitive touch control with dimmer for LED strips and DC 5-20V consumers, recommended 12V, supports 3A in use and up to 10A in peak, allows smooth brightness adjustment with memory and gradual on/off, works through glass or acrylic up to 6mm, includes reverse polarity protection and red-blue LED indicator for status.
1.73 €
Motor Driver Module, PWM, speed and direction control, 9-60V
Motor Driver Module, PWM, speed and direction control, 9-60V, 20A, 1200W
In Stoc
Precisely controls the speed and direction of brushed DC motors, via PWM for good torque and high efficiency even at low speeds. Operates at 9-60V and supports up to 20A, offers fine adjustment from potentiometer and CW OFF CCW switch for changing direction or stopping. The metal housing protects the electronics and allows for fixed mounting.
7.01 €