Liquid flow meter sensor, G3/4, 1-60L/min

In Stoc

Quickly monitor water flow and volume in projects with Arduino or other boards, ideal for automation and measurement systems. Operates at 5V DC with low consumption, measures 1-60 L/min, supports temperatures up to 80°C and pressure up to 1.2 MPa, standard G3/4 connection for easy installation on installations.

Out-of-Stock

Set of 120 electrolytic capacitors, 0.22-470uF

Out-of-Stock

Practical kit for electronics repairs and prototyping, offers 120 electrolytic capacitors in 12 common values, covers the 0.22-470uF range for filtering, decoupling and stabilization in sources and circuits, each value has 10 pieces for reserves and quick testing, nominal voltages 16-50V for various uses.

13.09 RON

Set of 10 alligator clips with male Dupont connector

Dupont alligator clip set, father, 10 pieces

In Stoc

Set of 10 test leads with alligator clip on one end and male Dupont connector on the other, ideal for quick connections on breadboards and Arduino projects. Provides secure grip on pins and contacts, 20 cm flexible cable for comfortable work, suitable for prototyping, measurements and troubleshooting in electronics.

13.56 RON

Set of 10 alligator clip Dupont female 20 cm jumper wires

Dupont Mama alligator clip set, 10 pieces

In Stoc

Set of 10 cables with alligator clip on one end and female Dupont connector on the other, ideal for quick breadboard testing and Arduino prototyping. Ensures secure hold on pins and contacts, stable connection, 20 cm length for flexibility in assembly, suitable for measurements, troubleshooting and electronic experiments.

13.56 RON

Set of 300 ceramic capacitors, 30 values 2 pF - 100 nF

Out-of-Stock

Set of ceramic capacitors 300 pieces

Out-of-Stock

Ideal for prototyping and electronic repair, this set offers 300 ceramic capacitors with values ranging from 2pF to 100nF, useful for filtering, decoupling and tuning. Includes 30 popular values for quick selection, compact components for THT mounting, suitable for breadboard and PCB, delivered organized for easy access in the workshop.

12.69 RON

GX16 6-pin connector set, male and female plugs

GX16 connector set, 6 pins

In Stoc

The 6-pin GX16 connector set is ideal for quickly making secure electrical connections in electronic and industrial equipment. Includes female and male connectors, ensures stable contact through thread fixing, offers precise pin alignment and easy assembly, with a 15.6 mm female connector drilling diameter.

8.62 RON

GX16 8-pin connector set male female pair

Cable set, Breadboard jumper, 140 cables

In Stoc

The 140-wire breadboard jumper set is ideal for rapid prototyping and clean connections between modules and components. It includes prefabricated leads in various lengths, with breadboard and development board compatible pins, firm contacts for stable signal, flexible insulation for easy handling and better assembly organization.

11.72 RON

Cable protection spiral, 1M

In Stoc

Ideal for organizing and protecting cables in technical applications, the flexible spiral allows for quick grouping of wires and adaptation to variable diameters. It has a black color, length 1 m measured slightly stretched, approximately 90 cm unstretched, can be easily continued by adding to the basket in multiples of 1 for longer sections.

2.19 RON

Digital composite caliper 150mm, LR44 SR44

2 AA battery holder with cap and ON/OFF switch

6 AA battery holder with cover and ON/OFF switch

6 AA battery holder with cover and switch

In Stoc

Ideal for quickly powering electronic projects and DIY devices, this 6 AA battery holder in series provides up to 9V with 1.5V. It has a lid for secure attachment, ON OFF switch for convenient control, pre-attached wires for easy connection, compact dimensions 95 x 70 x 19 mm for easy integration into housings.

11.57 RON

Relay SRD-05VDC-SL-C

In Stoc

Compact 5-pin relay for PCB mounting, ideal for automation and load control in industrial or DIY applications. Operates at 5V DC, reliably switches up to 10A and supports voltages up to 250VAC or 30VDC. Offers robust contact and good operating stability, easy to integrate into circuits.

4.96 RON

18650 battery holder, 1S

In Stoc

Ideal for quickly powering electronic projects with a 1S 18650 battery, this holder ensures simple assembly and secure contact. It features a 2-wire output for direct connection, a durable housing for repeated use, a compact size for easy integration, and marked polarity for correct installation.

2.12 RON

18650 2S battery holder with cover and ON/OFF switch

18650 2S battery holder with cover and switch

In Stoc

Ideal for DIY projects and prototyping, this dual 18650 battery holder provides stable power in a 2S configuration. Includes a cap for secure attachment, pre-attached wires for quick connection, and an ON/OFF switch for easy power control. The compact design helps with neat mounting in cases and portable applications.

7.41 RON

Battery holder 18650 2S with plug 5.5 x 2.1

18650 2S battery holder with 5.5 x 2.1 plug

In Stoc

Holder for 2 3.7V 18650 batteries, ideal for fast powering of DIY projects, electronic modules or portable devices. Provides secure mounting of cells in 2S configuration, has integrated cable for easy connection, 5.5 x 2.1 male connector compatible with many equipment, compact and durable construction for repeated use.

6.05 RON

18650 3S battery holder

In Stoc

Support for 3 3.7V 18650 batteries in 3S configuration, ideal for DIY projects, power banks and portable equipment, ensures stable fixation and secure electrical contact, is equipped with a cable for quick connection, allows easy assembly and clean organization of the assembly, compatible with standard 18650 cells.

4.45 RON

18650 4S battery holder

In Stoc

Holder for 4 3.7V 18650 batteries, ideal for quickly creating a 4S pack in electronic projects and DIY applications. Ensures firm fixation and stable electrical contact, has cable for easy connection, robust construction made of resistant plastic, simple assembly and quick access to replace cells.

6.22 RON

9V battery holder with 5.5x2.1mm connector and wires

9V battery holder with 5.5x2.1 plug

In Stoc

It allows fast powering of electronic projects from a 9V battery, providing direct connection to devices with a 5.5x2.1. It has a compact holder for easy attachment, flexible cable for convenient mounting, standard connector for wide compatibility and stable contacts for a safe power supply for testing, prototyping or occasional use.

7.87 RON

CR2032 button battery holder

In Stoc

Plastic holder for CR2032 button cell battery, also compatible with CR2025, ideal for quick mounting on electronic boards and DIY projects. Provides stable fixation and secure contact, allows easy battery replacement, has compact dimensions and durable construction for long-term use.

1.69 RON

3xAA battery holder, holder for 3 AA cells

Out-of-Stock

4AA battery holder with 5.5x2.1mm connector

4AA Battery Holder with Plug

In Stoc

Quickly powers electronic projects with 4 AA batteries connected in series, providing 6V for DIY, robotics or testing applications. Features 5.5x2.1 plug with wires for easy connection, hard plastic housing and aligned metal contacts for stable connection. Includes countersunk holes for permanent screw mounting.

5.51 RON

LED holder 5mm, plastic

In Stoc

Ensures quick and stable mounting of 5mm LEDs on panels or housings, providing a firm hold and a clean exterior appearance. Made of durable plastic, it has a base for secure attachment, reduces the risk of movement due to vibrations and is suitable for electronic projects, prototypes and industrial applications.

1.21 RON

Multifunctional pewter holder

In Stoc

Ideal for precise and comfortable soldering, this multi-functional stand includes 3x and 4.5x magnifiers for fine details, LED lighting for good visibility, clamping pliers for stability while working, and a heavy steel base for excellent grip on the workbench. The LED is powered by USB or 3 AAA batteries for mobility.

107.27 RON

Resistor 1/4W, 0.25W, 1%, metal film

In Stoc

Metal film resistor, ideal for current limiting and voltage dividers in electronic circuits, offers good stability over time and low noise. 0.25W power, 1/4W format, 1% tolerance for precise measurements and designs, available in different values for quick adaptation to any application.

0.16 RON

SRD-03VDC-SL-C Relay 3V DC 10A PCB 5 pin

Relay SRD-03VDC-SL-C

In Stoc

Compact 5-pin relay for PCB mounting, ideal for switching loads in electronic and automation projects. It operates on a 3V DC coil, supports up to 10A and safely switches circuits at 250VAC, 125VAC or up to 30VDC. Stable contacts and standard form make it easy to integrate into boards and modules.

4.05 RON

N-Mosfet LR2905Z, 55V, 42A

In Stoc

N-type power MOSFET for efficient switching in power supplies, motor drivers and DC converters, supports 55V and up to 42A, offers low Rds(on) resistance at Vgs 10V for low losses, 110W dissipation and stable operation up to 175C, in a compact 3-pin TO-252 package.

3.63 RON

Multi-turn potentiometer 10k, 3590S

In Stoc

Multiturn potentiometer for fine and stable adjustments in electronic circuits and industrial equipment, offers 10k Ohm resistance with ±5% tolerance and 2W power. Works safely at voltages up to 450V and in a wide temperature range, from -55C to +125C, 6.1mm shaft for easy mounting.

15.10 RON

16 MHz quartz oscillator HC-49S, DIP package

16MHz HC-49S Quartz Oscillator

In Stoc

Ideal for generating a stable clock in microcontrollers and digital circuits, this 16MHz crystal in the HC-49S package offers good accuracy with ±20ppm tolerance, 30 Ohm series resistance and 20pF load capacitance. It is easily mounted on boards via DIP, has a compact 10.5 x 4.2mm footprint and 13mm pins for secure mounting.

1.10 RON

Digital Oscilloscope DSO150

In Stoc

Hobby digital oscilloscope, assembled, ideal for quickly checking and viewing signals in electronic projects. It has a 2.4-2.7 inch TFT color screen, integral housing with rotary encoder for easy control, extended sensitivity 5mV/div to 20V/div and analog bandwidth up to 200kHz. Includes BNC probe, power supply is at 9V via 2.1x5.5.

262.93 RON

Silicone pad for workbench, heat resistant, 300 x 200mm

Silicone workbench pad, heat-resistant, 300 x 200mm

In Stoc

Heat-resistant work surface for soldering, protects the countertop and parts during electronic interventions, made of durable silicone, resistant to high temperatures, easy to clean and stable against slipping, 300 x 200 mm format suitable for compact benches and soldering stations.

44.77 RON

Silicone pad for workbench, heat resistant, 350 x 250mm

Silicone workbench pad, heat-resistant, 350 x 250mm

In Stoc

Heat-resistant silicone work surface, ideal for soldering and electronic work, protects the work table from high temperatures and solder spatter. Provides good adhesion for parts and tools, is easy to clean and remains flexible for storage. Size 350 x 250 mm, suitable for soldering stations and precision repairs.

75.25 RON

5V 1W polycrystalline solar panel 107x61mm

Solar panel 5V, 1W

In Stoc

Ideal for DIY projects and powering devices to light, offers nominal 5V output with real voltage 0-6V depending on lighting, measured power 1W, polycrystalline silicon cells for good efficiency, compact format 107 x 61 x 2 mm with wire connection on the back. For stable 5V a stabilizer is required.

25.45 RON

Pair of IR LED emitting, receiving 5mm

In Stoc

IR emitter and receiver pair with 5mm LED, ideal for optical barriers, presence detection and contactless controls. Provides infrared emission and reception for automation systems and electronic projects, standard 5mm format easy to mount, fast response and simple integration on PCB boards, suitable for DIY or industrial applications.

1.69 RON

Soldering gun, letcon, with gas lighter (Butane), 1300 degrees

Out-of-Stock

Soldering gun, letcon, with lighter gas (Butane), 1300 degrees, adjustable

Out-of-Stock

Ideal for soldering and heating in the field, without access to electricity, it works with butane gas and offers adjustable temperature from 370 to 1300 degrees C. Includes two heads, soldering tip and flame jet for heating applications, has a removable threaded tip and a transparent 8 ml tank for quick fuel level control.

62.41 RON

Soldering iron with adjustable temperature 280-480C

Out-of-Stock

Glue gun, letcon, constant temperature, adjustable

Out-of-Stock

Ideal for fast and precise soldering in service, hobby or industrial applications, this letcon with thermostat offers constant temperature and 5-step adjustment via button, integrated on/off switch, ceramic core heating for stability and short heating time, temperature-resistant nylon handle and silicone cable for safety and durability, memory function that retains the last setting.

136.37 RON

Out-of-Stock

4S, 16.8V balancing module

Out-of-Stock

Allows automatic balancing of 4 Li-Ion 3.7V cells in series, by connecting to the 4S balance port, brings the cells to the same voltage when charging and is ideal with a BMS without balance function, limits cells reaching 4.2V through the integrated resistor to let the others recover, balance current 66mA per cell, for 16.8V.

9.86 RON

RK097N Potentiometer 10K 6mm Shaft 3 pins

Potentiometer RK097N, 10K, 6mm

In Stoc

B-type rotary potentiometer for fine adjustment of volume, level or speed in electronic and industrial equipment, 10k ohm with carbon film technology for stable control, 3 pins for easy integration on the board, 6mm shaft with 15mm length and 7mm thread for secure mounting, supplied with washers and nuts.

3.03 RON

Multi-turn potentiometer, 100k, 3590S

In Stoc

Multiturn potentiometer for fine and stable adjustments in control and calibration circuits, with 100k Ohm resistance and ±5% tolerance for precise adjustments. Supports operating voltage up to 450V and power of 2W, operating safely in a wide temperature range, -55C to +125C, with 6.1 mm shaft compatible with common mountings.

17.65 RON

Infrared Receiver KY-022

In Stoc

Allows receiving commands from IR remote controls for Arduino projects and simple automation. Offers compatibility with most common 38 kHz remote controls, fast and stable signal response, easy interfacing via digital output, 3.3-5 V power supply and compact format for quick integration on breadboard or PCB.

4.84 RON

Solid State Relay 5V 2CH Low Level, SSR

In Stoc

2-channel SSR module for silent and fast control of AC loads in Arduino projects, automation and industrial control, 5V power supply, Low Level input with clear switching threshold, supports up to 250VAC and 2A per channel, compact dimensions for easy mounting in boxes and panels.

22.66 RON

8 bit shift register, 74HC595

In Stoc

Quickly expands the number of digital outputs for Arduino projects and other controllers, ideal for controlling multiple LEDs with few pins. Offers 8-bit shift register with parallel outputs, simple serial interface, latch for simultaneous output updates, 5V operation and easy breadboard mounting DIP16 package.

2.02 RON

LM336 voltage regulator, 5V

In Stoc

Programmable shunt voltage regulator for stable 5V reference, ideal for measurement and calibration projects such as voltmeters. It provides accurate and stable voltage, is easy to integrate into analog and digital circuits, has compact dimensions in the TO-92 package and works reliably as a reference source in industrial and electronic applications.

3.63 RON

SCR Voltage and Speed Regulator 4000W 220VAC

Voltage and speed regulator SCR 4000W, 220VAC

In Stoc

Continuously regulates voltage and implicitly speed for universal motors, resistors, heaters or lighting, 220V AC power supply with adjustable output 10-220V. SCR module with double insulation and aluminum housing for heat dissipation and safety, supports up to 4000W on resistive loads, includes anti-spike and surge protections for stable operation.

35.88 RON

LM317T voltage regulator TO-220 1.2-37V 1.5A

Voltage regulator LM317T LM317

In Stoc

The adjustable linear regulator is ideal for stabilizing and regulating voltage in electronic projects and power supplies. It offers variable output between 1.2 and 37 V, current up to 1.5 A, accepts input voltage up to 40 V, and the TO-220 package allows for easy mounting and efficient heat dissipation.

2.72 RON

5V voltage regulator LM7805 L7805 TO-220

Voltage regulator LM7805 L7805 5V

In Stoc

Linear regulator for stable 5V supplies in electronic projects and industrial equipment, accepts 7-35V input, offers up to 1.5A with 1A recommended, TO-220 case for easy mounting with heatsink, good stability under line and load variations, maximum dropout 2.5V at 1A for safe operation in common applications.

2.30 RON

Electronic components

Subcategories