DDS FG-100 frequency generator module with LCD and housing
DDS Frequency Generator Module, FG-100, 1Hz-500KHz, 4-10V
In Stoc
Compact DDS generator for fast testing and troubleshooting in electronics, with LCD1602 display and dedicated controls for easy setup. Offers 1Hz-500kHz frequency with fine resolution, multiple waveforms including sine, square, triangle, saw and noise, plus DC offset and FILTER function for cleaner signal. 50 Ohm output, 4-10V power supply, memorable settings.
Ft13,819.93
Flexible transparent LED lens set for cosplay visors
Flexible LED Lens Set, Transparent, Cosplay, White, 6V
In Stoc
Two flexible LED lenses for cosplay visors and DIY projects on masks or helmets, easily bends and cuts to follow the desired shape, reflective film with dots diffuses light evenly on the surface, semi-transparent illuminated visor effect, 6V power supply with 2 CR2032 batteries in series, button support and cables for quick assembly.
Ft3,110.59
Micro USB male connector 2 wire VCC GND power supply DIY 50 cm cable
Micro USB male cable for power supply, with 2 wires
In Stoc
Practical solution for DIY power supply via Micro USB, ideal when you only need power without data. It has a male Micro USB connector on one end and two loose wires, red VCC and black GND, on the other for direct soldering or quick integration into projects. Length 50 cm, flexible PVC cable, recommended current up to 3A.
Ft617.16
ZVS induction heating module 1000W, 12-48V, 20A
Induction Heating Module, ZVS, 1000W, 12–48V, 20A
In Stoc
Compact solution for rapid heating of metals by induction, useful for localized heat treatments, hardening, annealing, or small melting tasks. Operates at 12-48V DC and delivers up to 1000W, with ZVS switching for high efficiency and stable heating. Robust construction with power MOSFETs, double-sided PCB, and included heatsink, with simple connection to the working coil.
Ft17,241.85
5V 3A Type-C power adapter with switch
Power supply 5V, 3A, Type-C, with switch, 220VAC
Last items in stock
AC-DC 220V adapter with stable 5V 3A output on USB Type-C, ideal for safely powering Raspberry Pi boards and 5V projects. The integrated on-off switch allows quick shutdown without removing the cable, offers surge protection for constant operation, compact housing and 100 cm cable for convenient use on the desk or in the laboratory.
Ft2,542.10
JST XH2.54 4 pin 20cm cable for Arduino and ESP32
New
Cable with JST XH2.54 connector, 4 pins, 20 cm
In Stoc
Ideal for quick and detachable connections in electronic projects, for development boards, sensors, or LED strips with JST-XH. It has 4 pins at a 2.54 mm pitch, a 20 cm cable for easy mounting in cases and test stands, 30 AWG copper contacts for reduced losses, a durable PA66 housing, and a clip fastening for secure attachment.
Ft93.68
DIN rail power supply OMCH NDR 12V 150W AC-DC
AC-DC DIN rail power supply, OMCH NDR, 12V, 150W
In Stoc
DIN rail AC-DC power supply for stable 12 VDC power in automation and control panels, delivers up to 150 W and 12.5 A for PLCs, relays, drivers, or electronic modules. It accepts a wide 100-240 VAC input, has efficiency of up to 90%, and a compact design for quick installation in electrical cabinets.
Ft16,146.21
DIN rail power supply OMCH NDR 24V 150W
AC-DC DIN rail power supply, OMCH NDR, 24V, 150W
In Stoc
AC-DC DIN rail power supply for automation and industrial control, provides stable 24 VDC at up to 6.5A and 150W, universal input 100-240 VAC, high efficiency up to 90%. Compact design for quick installation in electrical panels, ideal for PLCs, relays, drivers, telecom, and electronic applications.
Ft16,210.50
16mm non-latching panel button
Momentary push button, 16 mm, Red
In Stoc
16mm red momentary push button, ideal for quick commands, reset, or pulse signals in industrial and electronic applications. The non-latching contact returns automatically after release, ensuring precise and safe operation. It is easy to mount in panels through a standard 16mm hole, has a robust plastic and metal construction for long-term use, and compact dimensions for integration in tight spaces.
Ft307.66
XY-MB02YF Bluetooth proximity relay module, 5V relay
Bluetooth proximity switch module, with relay, XY-MB02YF, 5V
In Stoc
Smart proximity switch with Bluetooth BLE, automatically activates a bistable relay when the phone connects and turns off the load after leaving range or disabling Bluetooth. Works without an app, compatible with iOS and Android, has very low power consumption thanks to the latching relay, supports control of up to 10A, and allows advanced settings via AT commands over UART.
Ft5,655.45
WS2815 LED diffuser silicone tube 180 degree IP65 1m
Silicone tube. Diffuser for WS2815 LED strip, 180 degrees, IP65, 1 m
In Stoc
Flexible silicone diffuser tube for addressable LED strip, provides uniform light over 180 degrees and a clean look in decorative or architectural projects. The UV-resistant material maintains its transparency and flexibility over time, and the IP65 protection makes it suitable for indoor and outdoor use. Compatible with WS2811, WS2812, and WS2815, 1 m length, delivered without LED strip.
Ft3,777.34
Addressable LED strip WS2812B IP20 10cm 5V RGB
WS2812B addressable LED strip, IP20, 10 cm
In Stoc
Compact solution for RGB lighting effects controlled in DIY and ambient projects, with 6 SMD5050 LEDs per 10 cm, each pixel individually addressable through the integrated WS2812B controller. It operates at 5V and is easily controlled through a single data pin with Arduino, ESP32, or Raspberry Pi. Cut spacing at each LED, IP20 for indoor use.
Ft351.74
Miniature solenoid electrovalve NC 6V 0520D for air
Miniature solenoid valve, air, NC, 0520D, 6V
In Stoc
Designed for precise air flow control at 6VDC, this solenoid valve operates Normally Closed, saving energy when not powered. It opens quickly on command, has power consumption under 2W, very good sealing for maintaining pressure, and a compact 13x15x20 mm body, ideal for equipment with limited space, with 3.5 mm and 3.0 mm ports.
Ft1,458.40
Miniature solenoid valve NO 6V 0520C for air
Miniature solenoid valve, Air, NO, 0520C, 6V
In Stoc
Ideal for precise control of air or gas in 6VDC projects, it operates Normally Open for free flow without power, and closes quickly when energized for secure blocking. It has power consumption below 2W, an ultra-compact 13 x 15 x 20 mm body for easy integration, 3.5 mm and 3.0 mm ports, good sealing, and low noise below 60 dB.
Ft1,430.85
Nickel-plated strip 0.15mm 3P for 18650 batteries, 10m
Nickel-plated strip 0.15mm, 20.2mm, 3P, 10 meters
In Stoc
Ideal for making connections in 18650 battery packs in 3P configurations, it allows precise alignment at a distance of 20.2 mm between cells. The 0.15 mm thickness provides a balance between flexibility and strength, the nickel-plated layer improves corrosion protection and contact stability, and the 10 m roll is suitable for assemblies, repairs, or DIY spot welding projects.
Ft12,106.22
Nickel-plated strip 0.15mm 5P for 18650 batteries, 10m
Nickel-plated strip 0.15mm, 20.2mm, 5P, 10 meters
In Stoc
Ideal for making connections in 18650 battery packs, especially 5P configurations, it provides precise spot welds and stable contacts. The 0.15 mm thickness ensures a balance between flexibility and strength, the 20.2 mm pitch makes cell alignment easier, and the nickel-plated layer improves conductivity and corrosion protection. 10 m roll for assembly and repairs.
Ft19,164.04
XH2.54 4-pin 90 degree connector compatible with JST-XH
New
XH2.54 connector with 4 pins, 90-degree terminals
In Stoc
Ideal for secure and detachable connections between PCB and cable in Arduino projects, 3D printers, LEDs, or sensors. 2.54 mm pitch for compatibility with boards and prototyping, 4 pins with 90-degree terminals for parallel wiring in low-clearance spaces, flame-retardant and polarized PA66 housing, brass contact with firm grip, up to 3 A per pin.
Ft13.78
4mm banana plug test cable set crocodile clamp 1m
New
Test cables, 4 mm banana plug to crocodile clip, 1 m, 15 A, 1000 V, 2 pcs
In Stoc
Ideal for measurements and quick connections in circuits, this set offers a secure transition from a 4mm stackable banana plug to a crocodile clip with a firm grip. 1 m cables with flexible PVC insulation, approx. 4 mm diameter, support up to 15A and 1000V, compatible with multimeters, laboratory power supplies, and other equipment.
Ft2,824.05
MOSFET reverse polarity protection module 3-28V 12A
Reverse polarity protection module, MOSFET, 3–28V, 12A
In Stoc
Protects equipment quickly against reverse power connection, using a MOSFET with minimal losses. It operates between 3 and 28 VDC, supports up to 12A continuous, offers a very low voltage drop below 50 mV, and an ultra-fast response under 1 us. Its compact 12x22 mm size makes it easy to integrate into projects with batteries, DC power supplies, and development boards.
Ft777.88
100V 300A MOSFET switch module with 5-18V control, direct cooling
New
High-power MOSFET switch module, 100V 300A, 5–18V control
In Stoc
Switch high-power DC loads quickly and directly from a logic or PWM signal, without mechanical relays, supporting up to 100V and 300A peaks. Based on the AOTL66912 MOSFET with very low on-resistance for reduced losses, it is driven at 5–18V, ideally 10–12V at high currents, low-side, on an ultra-compact 14x15mm board.
Ft818.29
WH148 1K linear rotary potentiometer for Arduino
Rotary potentiometer WH148, 15 mm, 1K
In Stoc
Linear 1K rotary potentiometer with 3 pins, ideal for manual adjustment of voltage or signal in Arduino, STM32, or ESP32 projects, provides smooth control for brightness, motor speed, or analog level. It has a 6mm metal shaft for standard knobs and panel mounting with a threaded bushing, includes washer and nut, 300-degree rotation angle, and a lifespan of up to 10,000 rotations.
Ft116.64
WH148 5K Linear Rotary Potentiometer for Arduino
Rotary potentiometer WH148, 15 mm, 5K
In Stoc
Linear rotary potentiometer 5K with 3 pins, ideal for manual adjustment of voltage or signal in Arduino, STM32, or ESP32 projects, provides smooth control for brightness, motor speed, or analog level. It has a 6mm metal shaft for standard knobs and panel mounting with threaded bushing, includes washer and nut, 300-degree rotation angle, and a lifespan of up to 10,000 rotations.
Ft100.10
WH148 10K linear rotary potentiometer, 3 pins, 15mm
Rotary potentiometer WH148, 15 mm, 10K
In Stoc
Linear rotary potentiometer 10K with 3 pins, ideal for manual adjustment of voltage or signal in Arduino, STM32, or ESP32 projects, provides smooth control for brightness, motor speed, or analog level. It has a 6mm metal shaft for standard knobs and panel mounting with threaded bushing, includes washer and nut, 300-degree rotation angle, and a lifespan of up to 10,000 rotations.
Ft100.10
WH148 20K linear rotary potentiometer for Arduino
Rotary potentiometer WH148, 15 mm, 20K
In Stoc
Linear rotary potentiometer 20K with 3 pins, ideal for manual adjustment of voltage or signal in Arduino, STM32, or ESP32 projects, provides smooth control for brightness, motor speed, or analog level. It has a 6mm metal shaft for standard knobs and panel mounting with threaded bushing, includes washer and nut, 300-degree rotation angle, and a lifespan of up to 10,000 rotations.
Ft100.10
WH148 50K linear rotary potentiometer for Arduino
WH148 rotary potentiometer, 15 mm, 50K
In Stoc
Linear rotary potentiometer 50K with 3 pins, ideal for manual adjustment of voltage or signal in Arduino, STM32 or ESP32 projects, offers smooth control for brightness, motor speed or analog level. It has a 6 mm metal shaft for standard knobs and panel mounting with threaded bushing, includes washer and nut, 300-degree rotation angle and a lifespan of up to 10,000 rotations.
Ft116.64
WH148 100K linear rotary potentiometer for Arduino
Rotary potentiometer WH148, 15 mm, 100K
In Stoc
Linear rotary potentiometer 100K with 3 pins, ideal for manual adjustment of voltage or signal in Arduino, STM32 or ESP32 projects, provides smooth control for brightness, motor speed or analog level. It has a 6mm metal shaft for standard knobs and panel mounting with threaded bushing, includes washer and nut, 300-degree rotation angle and a lifespan of up to 10,000 rotations.
Ft116.64
JST 3-pin 20AWG extension cable for WS2812 WS2811 LED strips
New
JST 3-pin extension cable, 20 AWG, for WS2812 LED strip, 1 meter
In Stoc
20 AWG 3-wire extension cable with JST SM connector, used to extend the connection between a WS2812 or WS2811 addressable LED strip and the controller or power supply. The red, green, and white wires are easy to identify for power, data signal, and ground; the conductor is copper with PVC insulation, and the 300 VDC rated voltage covers any 5 V or 12 V installation. Suitable for LED installations, control panels, and DIY projects with addressable strips.
Ft562.05
4-wire extension cable for RGB LED strip, 20 AWG, 12V
New
4-wire extension cable for RGB LED strip, 20 AWG, 1 meter
In Stoc
Extension cable with 4 wires of 20 AWG, tinned copper conductor and PVC insulation, for analog RGB LED strips and WS2811 or WS2812 addressable strips powered at 12V. The stripped and tinned ends allow soldering, terminal block connection, or crimping, while maintaining the order of the power and signal wires between the controller and the strip. It withstands 300 VDC and 80 °C, making it ideal for extending decorative lighting installations.
Ft738.39
S09 DC-DC converter module step up step down 3.3V 600 mA
New
DC-DC converter, S09, automotive Buck-Boost, 2.5–15V to 3.3V, 600mA
In Stoc
DC-DC S09 auto buck-boost converter that maintains a fixed 3.3 V output regardless of whether the 2.5-15 V input is higher or lower, with up to 600 mA, 1.2 MHz switching frequency, under 200 uA quiescent current, and shutdown function via the EN pin, ideal for stable power supply of 3.3 V loads directly from a battery or Li-ion аккумулятор.
Ft532.67
S09 automatic DC-DC converter module, 2.5-15V to 5V regulator
New
DC-DC converter S09, automatic buck-boost, 2.5–15V to 5V, 600mA
In Stoc
Automatic buck-boost DC-DC converter S09, with 2.5 - 15 VDC input and fixed 5 VDC output, ideal for stable power supply of 5 V modules from batteries or automotive sources with variable voltage. It provides up to 600 mA output, 1.2 MHz switching frequency, quiescent current below 200 uA, and an EN pin for external turn-on or turn-off, in a compact SMD or 2.54 mm pin-mountable format.
Ft532.67
S09 DC-DC converter module step up step down 2.5-15V to 12V 600mA
New
DC-DC Converter S09, automatic Buck-Boost, 2.5–15V to 12V, 600mA
In Stoc
Automatic DC-DC converter S09, maintains a fixed 12 V output regardless of whether the 2.5-15 VDC input is higher or lower, with up to 600 mA output current, 1.2 MHz switching frequency, standby consumption below 200 uA, and an EN pin for controlled shutdown, ideal for stable battery-powered supply of 12 V modules in compact projects.
Ft537.26
Flat USB-C to USB-C 90 degree cable, 20W, 1m
Flat USB-C to USB-C cable, straight connector to 90-degree connector, 20W, 1 meter
In Stoc
Flat USB-C to USB-C cable, ideal for fast charging and tidy cable management on your desk or in compact setups, supports 20W Power Delivery and up to 3A for efficient power delivery, transfers data at speeds of up to 480 Mbps, has a 90° angled connector for tight spaces and a straight one, with sturdy metal connectors, 1 m length.
Ft2,203.22
Kit 450 insulated spade terminals 2.8 4.8 6.3mm
450 Insulated Spade Terminals (Fork), 2.8, 4.8, 6.3mm
In Stoc
The practical solution for fast and secure electrical connections in panels, automotive applications, household appliances, and DIY projects. Includes 450 insulated spade terminals, female and male, in sizes 2.8, 4.8, and 6.3 mm, with copper-plated contacts for good conductivity and corrosion resistance. The flame-retardant PVC sleeves provide protection, compatible with 0.5-2.5 mm2 cables.
Ft4,827.98
Buck DC-DC module 5-80V to 5V 1.25A for Arduino ESP32
Out-of-Stock
DC-DC Buck Converter Module 5-80V to 5V, 1.25A
Out-of-Stock
DC-DC buck converter for obtaining a stable 5V supply from variable sources between 5 and 80V, ideal for USB, Arduino and control modules. It provides up to 1.25A continuous, efficiency above 90% and very low standby consumption, the aluminum substrate helps with thermal dissipation for reliable operation in industrial and automotive applications.
Ft1,183.80
Wanptek TPS605 laboratory power supply, 0-60V, 0-5A, 300W
Adjustable Power Supply, Wanptek TPS605, 60V, 5A, 300W
In Stoc
The adjustable power supply for testing and servicing provides 0-60V and 0-5A with power up to 300W, LED display with precise reading for voltage, current, and power, fast control via encoder with fine adjustment, automatic CV/CC switching for stability, OVP, OCP, OTP protections, and an intelligent fan for safe operation.
Ft46,375.94
Buck DC-DC module 5-80V to fixed 9V 1.25A, Arduino VIN
Out-of-Stock
DC-DC Buck Converter Module 5-80V to 9V, 1.25A
Out-of-Stock
DC-DC step-down buck converter, ideal for obtaining a stable 9V supply from sources with wide variations between 5 and 80V. It delivers up to 1.25A continuous, over 90% efficiency for reduced losses, extremely low standby consumption, and an aluminum substrate for efficient heat dissipation. Suitable for Arduino on VIN, wireless modules, motor drivers, and embedded systems.
Ft1,134.21
Three-phase 380V frequency inverter HSD3000 4kW RS485 Modbus
Frequency inverter, three-phase 380V, HSD3000, 4 kW
In Stoc
Robust solution for controlling the speed of three-phase motors in industrial applications such as pumps, fans, processing machines, and automated lines. 380V three-phase power supply and 4kW power, fine speed adjustment through 0-400Hz frequency. Offers 0-10V or 4-20mA analog control and RS485 Modbus communication for integration with PLC or SCADA. Includes electrical protections and DIN rail mounting.
Ft75,248.28
PN106 Clamp Meter True RMS, NCV, AC DC current measurement 600A
Clamp Meter PN106, 4000 counts, True-RMS, NCV, Voice broadcast
In Stoc
Compact clamp meter for fast and safe measurements in electrical panels, HVAC, or automotive applications, it measures AC and DC current without contact and voltage up to 600V. True RMS technology provides accurate readings even on distorted waveforms, while NCV detects the presence of voltage without contact. The backlit LCD screen and Data Hold function ensure easy reading in tight spaces.
Ft17,870.03
AG8 Smart IR Controller ESP32-S3, 8 IR channels, WiFi Ethernet
ESP32-S3 Smart IR Controller, Home Assistant, AG8
Last items in stock
DIN module for automating equipment with remote control, simultaneously controls up to 8 IR devices through independent channels and quickly learns codes with the built-in IR receiver. It integrates automatically into Home Assistant via MQTT, offers stable connectivity via WiFi or Ethernet, and is powered directly at 9-24 VDC, with USB-C for programming and backup.
Ft55,133.71
Battery contact springs DIY, nickel-plated steel, AA 18650 CR123A
Individual spring-type contacts, DIY batteries
In Stoc
Spring-type individual contacts for DIY battery packs, made of nickel-plated steel, offer good conductivity and corrosion resistance. They are press-fit onto the ends of cylindrical batteries A, AA, CR2, CR123A, 18650, 21700, ensuring stable contact even under vibration. Quick snap-in mounting on the housing wall, ideal for 3D-printed cases, suitable for holders, chargers, and portable devices. Set of 2 pieces.
Ft225.92
Dual spring contact set for DIY batteries, nickel-plated steel
Spring-type contact set, dual port, for DIY batteries
In Stoc
Spring-type dual-port contacts for DIY batteries, made of nickel-plated steel for good conductivity and corrosion resistance. They snap on by pressure to the end of the casing of cylindrical A, AA, CR2, CR123A, and 18650 batteries, providing a secure and detachable connection. The spring maintains constant pressure and reduces interruptions from vibration, ideal for holders, chargers, and portable devices. Includes 2 dual contacts.
Ft361.85
USB-A male to 2-wire DC power cable 3A 50cm
USB-A male to 2-wire cable, DC power supply
In Stoc
Ideal for DC power supply from a USB-A port in DIY projects or for replacing damaged cables, it offers a simple connection without data transfer. It has a USB-A male connector on one end and 2 VCC and GND wires on the other, ready to be soldered into the circuit, 50 cm long, flexible PVC insulation, recommended for currents under 3A.
Ft739.30
Dual LED digital thermometer 0.28, 4-28V, 2 NTC sensors
Dual Digital Thermometer, 0.28" LED display, 4-28V, 2 NTC Sensors
In Stoc
Monitorize simultaneously the temperature from two points, ideal for automotive, industrial, or DIY projects. Displays in real time on a clear 0.28-inch LED display, operates on a wide 4-28V power supply, includes 2 sealed NTC sensors with approximately 1 m cable for flexible mounting in air, liquids, or on surfaces. Measures between -20 and 100°C, quick plug and play installation.
Ft2,723.03
12V lead-acid battery charging module CN3768 4A
Lead-Acid Battery Charging Module, CN3768, AC-DC, 12V
In Stoc
Charging module for 12V lead-acid batteries with CN3768, ideal for UPS systems, security systems, and emergency lighting. It offers intelligent 3-stage CC CV float charging for longer service life, accepts 12-20V AC or 15-30V DC input, delivers up to 4A with over 90% efficiency, and includes overvoltage, overheating, and reverse polarity protection, with an LED for charging status.
Ft2,511.80
Li-Ion 3.7V 600mA USB Type-C charging module
Li-Ion 3.7V charging module, 600mA, with USB Type-C
In Stoc
Compact solution for charging a single 3.7V Li-Ion cell up to 4.2V, powered simply via USB Type-C from any 5V charger. It provides a 600 mA charging current for a good balance between speed and safety, has two LEDs for power status and full charge, and its stand-by consumption below 1 µA and very small dimensions make it ideal for DIY projects and portable devices.
Ft391.23
NE555 timer module 12V, delay on release 0-60s
NE555 Timer Module, Off-Delay, 12V
In Stoc
Compact solution for the automatic stopping of a task after a set time, operates at 12 VDC and uses delay-off timing, the relay engages immediately on power-up and disengages after 0-60 s adjustable from the potentiometer. 10A relay for controlling lighting, fans, or pumps, integrated LED for relay status, compact dimensions for easy installation.
Ft1,033.19
Auto connectors kit 2.8mm, 580 pieces, 2-9 pins, male female
Auto Connector Kit 2.8mm, 580 pieces, 2-9 Pins, Female and Male Terminals
In Stoc
Professional kit for making and repairing automotive wiring, ideal for cars, motorcycles, and scooters. Includes 580 pieces with male and female terminals of 2.8mm, for fast and stable connections. The PA66 flame-retardant plastic housings resist heat and wear, and the hook system securely locks the terminals, reducing the risk of loosening due to vibration. Compatible with 2-9 pin connectors for multiple applications.
Ft5,734.43
Test cable banana 4mm 4mm 1000V 15A black 1m
Banana cable 4mm to 4mm, 1000V 15A, Black, 1m
In Stoc
Test cable with 4mm banana connectors at both ends, ideal for quick connections between measuring instruments, power supplies, and circuits in the laboratory. Provides stable connection and good conductivity, with durable silicone insulation and safety up to 1000V, supports up to 15A, length 1m, black color.
Ft1,170.03