Small Tamiya connector pair
In Stoc
Small Tamiya connector pair for quick and safe connection of batteries in airsoft and model making, includes female and male 2-pin connectors, comes with 4 metal pins for crimping, compatible with common wiring and easy to install, EL4.5 model for reliable use in 2-wire power applications.
Ft291.35
Wago 2 Pin Connector
In Stoc
2-pin connector for quick and safe connection of wires, ideal in electrical panels, boxes and industrial applications. Ensures stable contact and easy assembly without special tools, accepts voltages up to 250VAC and currents up to 32A, compact design for space saving and high reliability in operation.
Ft165.50
Wago 3 Pin Connector
In Stoc
3-pin Wago connector for quick and safe connection of wires in boxes, panels or installations, allows clear joining of three conductors at a single point, stable and vibration-resistant contact, screwless assembly for time saving, compatible with circuits up to 250VAC and 32A.
Ft167.48
XT60 connector, pair, Mother Father
In Stoc
Pair of XT60 male and female connectors, ideal for quickly and safely connecting RC models to LiPo batteries. They provide firm and stable contact, supporting high currents up to 65A, are easy to solder onto cables, have polarization for correct connection and ensure good resistance to vibrations in use.
Ft351.80
Adjustable DC 3-18V 2A PWM motor controller
In Stoc
Simple and precise speed regulation for DC motors, through PWM control with good efficiency and low losses. It operates on 3-18V power supply and supports up to 2A, allows smooth speed adjustment with potentiometer, compact design easy to integrate into DIY projects, automation and light industrial applications.
Ft549.01
Synchronous controller 6-42V LM25116
In Stoc
Synchronous buck controller for power supplies up to 42V, ideal for industrial and automotive applications, offers current mode control with emulated ramp for stability and low noise, programmable frequency 50 kHz–1 MHz, external high/low MOSFET control with adaptive dead-time, includes current limit, soft-start and undervoltage protection.
Ft1,243.69
Laser diode 5V 5mW 650nm
In Stoc
Ideal for electronic alignment, pointing and optical testing projects, it offers stable red beam at 650nm, simple 5V DC power supply, 2-5mW optical power for good visibility, compact 6 x 10 mm dimensions for easy integration, operates in the range of -10 to +40 degrees C.
Ft198.20
Schottky diode 1N5819 SMD SS14 40V
In Stoc
Schottky diode for fast rectification and reverse polarity protection in switching power supplies and DC circuits. Offers low voltage drop 500mV for low losses, supports 40V and average current 1A, has 40A peak impulse, dissipated power 1.1W, in SMD SS14 package for compact mounting.
Ft24.77
LED digital display 0.56" 1 digit 7 segments
In Stoc
0.56 inch 1 digit 7 segment LED display, common cathode, ideal for quickly indicating values in Arduino and other development board projects. It operates at 5VDC and offers good visibility in red, has 10 pins for easy connection and supports current per segment up to 40mA with series resistor.
Ft198.20
LED digital display 0.56" 2 digits, 7 segments, Red
In Stoc
2-character, 7-segment LED display, ideal for clearly displaying numerical values in electronic projects and control panels. It operates on common cathode, has highly visible red light, 0.56 inch characters for easy reading and 10 pins for quick connection, compatible with development boards such as Arduino.
Ft247.75
Digital LED display 0.56" 3 digits, 7 segments, Red
In Stoc
3-character, 7-segment LED display, ideal for clearly indicating values in electronic projects, control panels or instrumentation. It has a common cathode for easy integration, is compatible with development boards such as Arduino, offers large 0.56 inch digits for good visibility, with intense red light, 12-pin connection.
Ft297.30
10-pin ribbon cable, 2X5, 20cm
In Stoc
10-pin 2x5 ribbon cable, ideal for connecting LCD modules to Ramps 1.4 shield in 3D printing and electronics projects. It has a length of 20 cm for flexible mounting, connectors on both ends for quick installation, standard pitch for wide compatibility, flat construction that reduces wiring clutter.
Ft663.96
SPDT ON-OFF-ON 3-pin latching push button
In Stoc
SPDT ON-OFF-ON switch with latching, ideal for quick selection between two circuits or sources in panels and equipment. It has 3 NC COM NO pins for simple connection, supports up to 250V and 6A, round housing for clean mounting, fits into 20-22 mm hole for easy and stable installation.
Ft297.30
PWM Driver 5A, 90W, 3-35V
In Stoc
Compact PWM module for controlling DC motor speed or dimming LED strips, flexible 3-35V power supply with 3-15V or 5-35V selection, output current up to 5A, controlled power up to 90W, fine adjustment of duty cycle 1-100% at 10kHz, low standby power consumption and 30 x 24mm dimensions for easy integration.
Ft679.82
40 pin 2.54 female header
In Stoc
40-pin female connector with 2.54 mm pitch, ideal for making quick connections between PCB boards, sensors and modules. The pins ensure precise fixation and stable contact, easy to mount on the board, compatible with most Arduino and prototyping projects, suitable for extensions, testing and modular wiring.
Ft93.15
40 Dupont threads 10cm, Tata-Tata
In Stoc
Dupont Tata-Tata wires are ideal for quick connections on breadboards and testing temporary circuits, the set includes 40 wires with pins on both ends for compatibility with development boards and modules, the 10 cm length helps with tidy assembly in tight spaces, safe connectivity for prototyping in electronics and hobbies.
Ft633.24
40 Dupont Threads 20cm, Mother-Mother
In Stoc
Set of 40 Dupont female-female wires, ideal for quickly connecting components on breadboards and for solderless prototyping. Each wire is 20 cm long, FF connectors on both ends for compatibility with standard 2.54 mm pins, offers good flexibility and secure contact, suitable for Arduino, Raspberry Pi and electronic modules.
Ft734.32
40 Dupont Thread 20cm, Father-Mother
In Stoc
Dupont male-female cable set for quick connection of modules and components on breadboard or development boards, ideal for prototyping and circuit testing. Includes 40 flexible wires with MF connectors on both ends, 20cm length for easy arrangement in projects, compatible with standard 2.54mm pins, reusable and easy to organize.
Ft734.32
40 Dupont Thread 20cm, Tata-Tata
In Stoc
Dupont Male Male cable set for quick connections on breadboard and circuit prototyping, ideal for Arduino and electronics projects. Includes 40 flexible wires with male connectors on both ends, 20 cm long, suitable for tidy connections between modules, pins and development boards.
Ft734.32
40 Dupont Threads 30cm, Mother-Mother
In Stoc
Dupont female-female cable set for quick connection of modules and components on breadboard, ideal for prototyping and testing. Includes 40 flexible wires with connectors on both ends, 30 cm long for convenient assembly, compatible with standard 2.54 mm pins, easy to organize and reuse in electronic projects.
Ft621.35
40 Dupont Threads 30cm, Father-Mother
In Stoc
Dupont male-female cable set for quick connections on breadboards and modules, ideal for prototyping and testing circuits without soldering. Includes 40 wires with connectors on both ends, 30 cm long for flexibility in mounting arrangements, compatible with standard 2.54 mm pins, easy to identify and organize in strips.
Ft621.35
40 Dupont Thread 30cm, Tata-Tata
In Stoc
Set of 40 Dupont male-male wires, ideal for quick connection of components on breadboards and solderless prototyping. It has Male-Male connectors on both ends for wide compatibility with modules and development boards, 30 cm length for flexible wiring, grouped ribbon wires for easy organization, secure contacts for stable connections in testing and debugging.
Ft686.76
LM358P Operational Amplifier
In Stoc
Dual operational amplifier for signal amplification and conditioning projects in analog applications, offers 2 independent channels, operates at voltages between 3 and 24 V, has low consumption and good stability, being suitable for filters, instrumentation amplifiers and measurement circuits in electronic systems.
Ft92.16
Out-of-Stock
GPRS antenna 50mm, SMA male, with IPEX extension
Out-of-Stock
Compact 50 mm antenna for SIM800L modules and GSM GPRS applications, optimized for the 900 1800 MHz bands, offers stable transmission and 2 dBi gain, has 50 Ohm impedance and vertical polarization, SMA male connector and adapter cable with SMA female to IPEX U.FL for quick connection to modules and equipment.
Ft656.04
LED strip 12V 120 smd 2835, 1m
In Stoc
Ideal for uniform linear lighting in technical and decorative projects, it operates at 12V DC and offers 6000K cold light with 120 SMD 2835 LEDs per meter. It has approximately 12 lm per LED, a compact width of 8 mm for easy installation, is quickly fixed with double-sided adhesive tape and is delivered cut to the ordered length, up to 5 m.
Ft1,192.16
Addressable LED strip, RGB, WS2812, 60led/m, 10cm, White
In Stoc
Individually control each LED for dynamic effects and RGB animations with Arduino or other microcontrollers, 10 cm segment with 6 WS2812 5050 LEDs at 5V, light in any color thanks to RGB, white PCB and double-sided adhesive tape for quick assembly, depending on the batch may have protection with a thin layer of silicone on the LED side.
Ft266.58
RGB LED strip, 60led/m, IP65 water resistance, 1 meter
In Stoc
RGB decorative lighting for indoor and outdoor use, with 60 LEDs per meter and IP65 waterproof protection thanks to the transparent silicone layer. It works at 12VDC, is quickly mounted with the adhesive on the back and provides uniform light over a width of 10 mm. The price is for 1 meter, for 5 meters or multiples you receive the roll and connectors at both ends.
Ft1,329.91
40-pin 2.54 male bar
In Stoc
40-pin 2.54 pitch male connector, ideal for quickly making connections on PCB boards, sensors and modules. Provides precise alignment and stable contact, the pins easily fit into headers or breadboards, can be cut to the desired size for DIY projects and prototyping, reliable construction for repeated use.
Ft168.47
Mini PCB button, 6x6x5, 2 pins
In Stoc
Ideal for prototyping and shortcuts in electronic projects, this mini tactile button easily mounts to PCBs and is used directly on breadboards. It features a compact 6x6x5 mm form factor, 2 pins for easy connection, precise actuation with tactile feedback, and robust construction for repeated use in test assemblies or final products.
Ft29.73
40-pin male bar, 90 degrees
In Stoc
40-pin male header connector with 90-degree bent pins, ideal for PCB mounting in tight spaces and for side connections. 2.54 mm pitch, precise alignment and secure contact, suitable for prototyping, modules and extensions, ensures fast and stable connection in electronic applications.
Ft168.47
80 pin 90 degree 2.54 male, double
In Stoc
80-pin male, double row bar type connector, ideal for making connections on PCB boards, modules and sensors, the pins are bent at 90 degrees for side mounting and space saving, the standard 2.54 mm pitch ensures wide compatibility, the 40x2 configuration offers stable connections and precise alignment when soldering.
Ft208.11
Out-of-Stock
Lithium battery, 3.7V, 1000mAh
Out-of-Stock
Li-Po 3.7V 1000mAh battery, ideal for portable electronic projects and DIY devices, offers stable power in a compact 40x30x8mm format. It has integrated protection circuit for overcharging and discharging, charges at 4.2V, supports current up to 1A and comes with 2 wires for easy connection.
Ft2,972.97
Out-of-Stock
Lithium battery, 3.7V, 1800mAh
Out-of-Stock
Li-Po 3.7V 1800mAh battery, ideal for electronic projects, robots or portable devices, offers stable power supply and good energy density, includes overcharge and discharge protection circuit, comes with 2 wires for quick connection, compact format 34x50x10 mm, male plug may be present depending on the batch.
Ft3,468.47
Out-of-Stock
Lithium battery, 3.7V, 2900mAh
Out-of-Stock
Li-Polymer 3.7V 2900mAh battery, ideal for RC projects and portable power supplies, offers stable energy and good autonomy, includes overcharge and discharge protection circuit, support for standard and fast charging up to 0.5C, discharge current up to 1C, compact size 58x40x9.5 mm and light weight 53 g.
Ft5,376.12
Out-of-Stock
Lithium battery, 3.7V, 400mAh
Out-of-Stock
Li-Po 3.7V 400mAh battery, ideal for compact electronic projects, toys, sensors or portable devices. Provides stable power supply, includes overcharge and discharge protection circuit, has 2 wires for quick connection and supports standard 0.2C charging, in compact dimensions 48 x 34 x 3 mm.
Ft1,752.07
ESD antistatic wristband with pliers
In Stoc
It eliminates static electricity from the body and protects PCB boards during assembly or service, works by grounding, has clamps for quick attachment to the ground point, adjustable band for wearing comfort, flexible cable for freedom of movement and stable contact.
Ft741.26
RFID key fob, 13.56MHz, S50
In Stoc
RFID key fob 13.56MHz S50 for access control and identification in projects with Arduino and compatible RFID modules, rewritable up to 200k cycles, with a fixed, non-cloneable ID. It works by induction without a battery, is waterproof and made of durable ABS, attaches easily to keys, and offers fast detection at approximately 3-10 cm depending on the reader.
Ft171.44
PCB button, 12x12x7.3mm
In Stoc
Tactile button for PCB mounting, momentary type without latching, ideal for shortcuts in electronic projects, control panels and industrial equipment. It has a compact format of 12 x 12 x 7.3 mm, precise and reliable actuation, is easily mounted on the board and is compatible with a 12x12x7.3 cover for aesthetic integration and protection.
Ft109.01
Capacitive button TTP223, touch
In Stoc
Capacitive touch switch for opening/closing commands on electronic projects, with very low consumption and 2.5-5.5VDC. The output can be set to High or Low, and the operation can be non-latching or latching by shorting pads A and B. Compact format 11.5 x 8 mm, easy to integrate into housings and panels.
Ft247.75
Detent button, 12mm, PBS11A
In Stoc
Latching push button for ON OFF controls in panels and enclosures, ideal for electronic projects and industrial applications. Mounts in 12mm hole, has self lock mechanism to maintain state, compact dimensions 30 x 16mm and contacts suitable up to 3A at 125VAC or 1.5A at 250VAC, available in different colors.
Ft222.97
Non-detent button 16mm
In Stoc
Ideal for shortcuts in panels, electronic projects and automation, this momentary non-latching button automatically returns after pressing, easily mounts in a 16mm hole, has compact dimensions of 20 x 23mm, is available in different colors for quick identification and supports up to 125VAC 6A or 250VAC 3A.
Ft331.98
Non-latching micro switch, 1.6mm
In Stoc
Ideal for shortcuts in compact electronic assemblies, this momentary push-button switch automatically returns after actuation. It has an ultra-thin 1.6 mm profile and 4 x 4 mm dimensions for easy PCB integration, durable metal construction, 4 pins for stable soldering and secure connection in DIY or industrial projects.
Ft59.46
LED digital display 0.56" 4 digits, 7 segments, Red
In Stoc
4-character red LED display, ideal for clearly displaying values in electronic projects, meters and control panels. It has 4 digits with 7 segments for good readability, common cathode, 10 pins for easy connection and is compatible with development boards such as Arduino. The 0.56 inch character size provides good visibility from a distance.
Ft275.50
Mechanical endstop SS-5GL2
In Stoc
Mechanical endstop, ideal for end position detection on 3D printers, CNC and automation. Offers precise and repeatable switching, lever actuation for easy triggering, reliable contacts for stable signal, robust construction and simple mounting on standard brackets.
Ft428.11
Voltage step-down module XL4015, 5-36VDC, 5A, 75W, with display
In Stoc
DC-DC step down power supply ideal for stable power supply of electronic projects from a higher voltage, accepts 5-36V and delivers 1.25-32V adjustable via potentiometer, up to 5A and 75W, includes display with switching between input and output voltage and calibration function, comes with radiator and spacers for quick assembly.
Ft1,914.59
BMS module 3S, 40A, 12.6V
In Stoc
BMS module for 3S Li-Ion packs, ideal for assembling 12.6V batteries from 18650 cells and tool applications, manages charge and discharge protection for stable operation. Enhanced version, supports up to 40A discharge with adequate cooling, up to 10A charge, compact format 41 x 55 x 3.4 mm for easy integration.
Ft762.07
TO-92 transistor set kit, 600 pieces, 15 values
In Stoc
Practical set of TO-92 transistors for prototyping and electronic repairs, includes 600 pieces in 15 common NPN and PNP values, comes with clear sorting by type for quick identification, ideal for breadboards and DIY projects, offers wide compatibility with switching and amplifying circuits, sufficient stock for workshops and laboratories.
Ft4,373.24
Kit Adjustable power supply 220VAC to 1.25-12VDC, LM317, with housing
In Stoc
Unassembled kit for making an adjustable voltage source, ideal for laboratory, testing and electronic projects. Powered by 220VAC and offers adjustable DC output 1.25-12V with LM317 regulator, includes all components, EU plug cable and acrylic housing, power 2W, compact dimensions 120 x 70 x 48 mm.
Ft5,294.86