ZVS induction heating module, 1000W, 20A, 12-30V

In Stoc

ZVS induction heating module, ideal for rapid heating of metal parts with an external coil, operates at 12-30V DC, delivers up to 1000W and 20A under optimal conditions, soft start for high load, can also be used as a power inverter by replacing the coil with a transformer, requires active cooling for stable operation.

10.68 €

Panel female jack, 5.5x2.1mm , DC-022B

In Stoc

Female DC connector for panel mounting, ideal for powering electronic equipment and DIY projects, compatible with 5.5x2.1mm plugs, has two plus and minus terminals for quick wiring, attaches to the panel with the included nut, suitable for 7.8mm hole and panels up to 3mm.

0.29 €

KCD-1 switch, SPST, On/Off, 23mm

In Stoc

Rocker panel switch for simple On Off control in electrical and electronic projects, 2-pin SPST for quick connection, supports 10A at 125VAC or 6A at 250VAC, durable black plastic housing, round mounting with a diameter of 23mm and compact dimensions of 23 x 29mm.

0.37 €

Stabilizer filter for stepper motor

In Stoc

The module interleaved between the 3D printer motherboard and the stepper motor optimizes the signal for smoother movement. Reduces vibration and noise, improves the smoothness of printed surfaces and reduces the banding effect. Uses 8 freewheeling flyback diodes for pulse stabilization, compact 40 x 30 mm format, compatible with most 3D printers.

1.72 €

Shield Joystick, v1.A, 2 axes plus buttons, 3.3-5V

In Stoc

Joystick shield for Arduino UNO compatible boards, ideal as a game remote or robotic arm controller. Offers 2-axis joystick with analog readout A0 A1 and button on D8, 6 dedicated buttons on D2-D7, 3.3V 5V switch for quick compatibility, connectors for nRF24L01 module or Nokia 5110 LCD and easy access to pins through marked header.

3.55 €

LCR TC1 tester, color display, with IR decoder, 3.7V

On sale!-3.96 €Out-of-Stock

LCR tester TC1, color display, with IR decoder, 3.7V

Out-of-Stock

Multifunctional tester for quick identification and measurement of electronic components, automatically detects transistors, diodes, resistors, capacitors and MOSFETs, clearly displays type, schematic and value on the color TFT screen, includes IR decoder with waveform display for remote controls, has self-calibration, USB charging and automatic shutdown, powered by internal 3.7V.

25.15 €

29.11 €

PWM motor speed controller, reversible, with button, 6-28V, 3A

In Stoc

Module for controlling the speed and direction of a DC motor via PWM, ideal for projects and automation. Operates at 6-28VDC, provides current up to 3A, includes potentiometer for fine speed adjustment and 3-position button for rotation in both directions and stop. Compact, 32 x 50 x 15 mm, with 3 cm wires for the button.

3.84 €

RGB LED, 10mm, common cathode

In Stoc

10mm RGB diode with frosted glass for uniform diffusion, ideal with Arduino and other boards for mixing colors through the 3 channels Red, Green, Blue. It has 4 pins and is with common cathode, the long pin connects to GND, and the others to the signal. It works at 2V on red and 3.2V on green and blue.

0.44 €

Busbar 80 pins, 2x40, Male, 2.54mm

In Stoc

Ideal for quickly making connections on PCBs, breadboards or modules, this straight male header offers 80 pins arranged 2x40, standard 2.54 mm pitch for wide compatibility. It can be easily broken to the desired length by bending with pliers, so you use exactly the number of pins you need. The straight pins ensure correct alignment and stable mounting in electronic and industrial projects.

0.48 €

Out-of-Stock

SONOFF v.R2 wireless relay, 1 channel, new version

Out-of-Stock

Remotely control lighting or other equipment ON/OFF via the eWeLink app, with voice commands via Google Home and Alexa, plus Siri integration via Raspberry bridge. Provides real-time status feedback and access from anywhere via 2.4GHz. Supports up to 10A and 2200W, low standby power consumption, flame-resistant ABS housing and user sharing function.

11.50 €

SONOFF T2 Touch Switch, 2 Channels

In Stoc

2-channel touch switch for smart lighting, with glass panel and guide LED for quick manual control. 2.4 GHz WiFi connection for remote control in eWeLink and voice commands via Google Home and Amazon Alexa. Provides in-app feedback with the ON OFF status of each channel and allows sharing access with family.

34.20 €

DC Male connector, 5.5x2.1, with 25cm wire

DC connector Tata, 5.5x2.1 , with 25cm wire

In Stoc

Ideal for quickly powering standard DC input devices, this 5.5x2.1 mm male connector comes pre-equipped with a 25 cm cable for easy connection and assembly. It offers wide compatibility with common sources and devices, ensures a stable connection, has wires ready for soldering or binding in terminals and is suitable for electronic projects, repairs and power extensions.

0.58 €

DC Connector Female, 5.5x2.1 , with 25cm wire

In Stoc

Ideal for quickly powering electronic equipment or DIY projects, this 5.5x2.1 mm female DC connector offers a secure and stable connection, has a 25 cm cable for flexible mounting, wires ready for soldering or quick connections, compact and durable construction for technical use.

0.43 €

AC-DC Power Supply Module, 100-240VAC to 5VDC, 2.5A

In Stoc

Compact and efficient 110-240VAC to 5VDC converter, ideal for powering electronic projects, modules and industrial equipment. Provides up to 2.5A for stable loads, includes overvoltage, overcurrent and short circuit protection, operates at 50/60Hz and ensures a constant output for sensitive applications.

3.03 €

Solenoid valve 12V, Water/Air, N/O, 1/2

In Stoc

Allows automatic control of water or air flow in installations, closes at 12VDC power supply being normally open. Has 1/2 connection, metal plus plastic construction and diaphragm for low viscosity liquids. Works at pressures 0.02-0.8 MPa and withstands up to 100C, offering a good flow rate in common applications.

8.31 €

XH2.54 connector set, 250 pieces, 2P-4P

In Stoc

Complete set for quickly making wiring and connections on electronic boards, includes 250 pieces in a modular box, 50 pairs of female and male connectors with metal pins, 2P, 3P and 4P configurations with 2.54mm pitch, compatible with 24-32 AWG wires, supports 1A at 125V and operates between -25 and 80 C.

4.00 €

8-channel relay module, with optocoupler, low level, 12V

In Stoc

Quickly control up to 8 AC or DC loads from a microcontroller or PLC, with active low 12V inputs and optocoupler isolation. Offers 10A @ 250VAC relays, NC NO COM screw terminals for each channel and grouped power and signal pins for easy wiring. The board is compact, 138 x 56 x 18.5 mm, with 4 mounting holes.

7.02 €

Solid State Relay SSR-40DA, 40A

In Stoc

40A solid state relay for fast and silent control of AC loads, ideal for automation and industrial control. Contactless switching, no sparks, zero crossing TRIAC output for reduced wear, optical isolation between input and output and status LED for easy verification. Accepts 3-32VDC control signal and load voltages up to 380VAC.

5.74 €

Programmable panel delay relay, 12V, with display, T3231

In Stoc

The panel timer module for automation, allows the control of a consumer with delay or cycle, with two times T1 and T2 clearly displayed. It is powered by 12VDC, offers simple programming from buttons and memorization of settings, includes automatic or manual mode with external trigger, powerful relay for switching loads up to 220VAC.

8.62 €

Adjustable step-up power supply, 200W, DC-DC, 6-35V to 6-55V, with housing

In Stoc

Boosts and stabilizes voltage in automotive, solar or electronic projects, with simple potentiometer adjustment and aluminum housing for efficient dissipation. Provides up to 200W, high efficiency synchronous conversion, 6-35V input and 6-55V adjustable output, output current up to 7A for various consumers.

7.83 €

Out-of-Stock

SPST switch, KCD1-105, 23mm

Out-of-Stock

Round rocker switch for simple power control in electronic projects and industrial applications, with 3 positions ON-OFF-ON and 3 pins for fast switching, supports 250VAC 6A or 125VAC 10A for resistive loads, easily mounts in the panel, outer diameter 23mm and mounting hole 20mm, black or red housing depending on the batch.

0.36 €

DIP socket, 18 pins

In Stoc

18-pin DIP socket for easy mounting and replacement of integrated circuits on PCB, protects the IC from thermal stress of direct soldering and simplifies troubleshooting. It has 2.54mm pitch for standard compatibility, 5.1mm PCB height, 0.6mm PCB holes and supports maximum current of 1A.

0.39 €

Micro JST connector, PH2.0, 2P, male, with 15cm cable

In Stoc

Ideal for quickly making internal connections in electronic projects, it offers secure and stable coupling. It has a PH2.0 interface with 2mm spacing, 2 pins for signal or power, male version for compatibility with PH2.0 plugs, 15cm cable for flexible mounting and clean wiring in tight spaces.

0.40 €

BMS Module 2S, 5A, Lithium, 7.4V

In Stoc

Provides protection and balancing for a 2S 7.4V Li-ion pack, with overcharge, overdischarge, overcurrent and short circuit protection. Supports charging at 8.4V and continuous current up to 5A, with instantaneous peak of 7A. Compact size of 17.5mm allows mounting directly over a 18650 cell, operates between -40 and 80°C.

1.66 €

BMS Module 3S, 8A, 11.1V, Lithium

In Stoc

3S Li-ion battery protection module, ideal for 3 18650 cells arranged in a triangle, ensures safe charging and discharging with overcurrent and short circuit protection. It operates at 11.1V nominal and 12.6V charging, supports up to 6-8A with 10A peak, has an internal resistance below 100mohm and a compact 30x30mm format.

2.05 €

BMS module with balance, 3S, settable 4S, 5S Lithium, 12.6V, 100A

In Stoc

Protects and balances 3.7V Li-ion batteries, 3S compatible and settable to 4S or 5S via B1 B2 bridges, delivered preset 3S for 12.6V. Provides active balance at 4.18V, supports up to 100A overcurrent protection and up to 50A continuous current in Split mode, includes NTC interface for temperature protection and allows Split or Same Port configuration.

4.67 €

BMS module with balance, 4S, settable 3S, 5S Lithium, 16.8V, 100A

In Stoc

Manages and protects Li-ion, LiPo battery packs between 3S and 5S, factory set to 4S 16.8V, with active balancing for cell equalization and better autonomy. Offers overcharge, overdischarge and overcurrent protection up to 100A, supports 40A continuous charging, can be wired Split or Same Port for current optimization, has input for NTC thermistor for thermal protection.

4.27 €

BMS module with balance, 3.2V, LiFePo4, 5S, adjustable 3S, 4S, 9.6V, 100A

In Stoc

Balanced BMS module for LiFePo4 packs 3S to 5S, factory set to 5S, provides overcharge, overdischarge and overcurrent protection up to 100A, supports 40A continuous charge and 50A continuous discharge in Split mode, includes active balancing for cell equalization and allows the connection of an NTC probe for temperature protection.

4.67 €

Panel Thermostat, W3230, 110-220VAC, 20A, Heating, Cooling

In Stoc

Panel thermostat module with NTC probe for precise heating or cooling control, 110-220VAC power supply and 20A relay for equipment control. Dual PV and SV display for quick reading, adjustable hysteresis for stability, temperature calibration for fine correction and alarm function when exceeding the threshold. Memorizes settings when power is cut off.

4.64 €

Out-of-Stock

NFC, RFID, PN532 V3, I2C, SPI and HSU module

Out-of-Stock

NFC/RFID module for reading and writing cards, ideal for Arduino and other 3.3V or 5V boards. Offers switch-selectable I2C, SPI and HSU interfaces, includes logic level converter for fast compatibility. Allows P2P communication and NFC interaction with Android phones, with working distance up to 5-7 cm. Compatible with Mifare, Ultralight, DesFire and FeliCa.

5.88 €

Addressable ring module, RGB, WS2812, LED 5050, with driver

In Stoc

Addressable RGB LED ring with 61 WS2812B 5050 LEDs, ideal for dynamic lighting effects in Arduino projects and other development boards. It is easily controlled via a single data wire, allows cascading for quick expansion, operates at 5V and provides uniform illumination over an outer diameter of 90mm.

5.93 €

LED traffic light module, 56mm, 3.3-5V

In Stoc

Ideal for simulating a traffic light in Arduino projects and other development boards, the module includes red, yellow and green LEDs with integrated resistors for direct connection to 3.3-5V. It quickly mounts on a breadboard, has digital inputs and a common cathode interface, and offers a compact 56mm form factor for easy prototyping and testing.

0.56 €

Solar panel, 12V, 350mA, 4.2W, 200x130mm

In Stoc

Ideal for powering or lightly charging 12V projects, it offers up to 4.2W from polycrystalline cells, delivers a maximum current of 350mA depending on light intensity, has connections on the back for clean mounting, compact 200x130mm format and a low weight of 100g.

14.28 €

Optocoupler relay module, 1 channel, 5V, 30A, adjustable level

In Stoc

Ideal for controlling large loads from Arduino, ESP32 or PLC, this optocoupler relay module provides isolation between logic and power for safer control. It supports up to 30A at 240VAC, accepts 3.3-5V signal and allows setting the trigger to High or Low via jumper. It has a green LED for power and a red LED for relay status, plus mounting holes for easy attachment.

3.98 €

Lead-Acid battery balance module, 2S, HT-10C, with active balance and interconnection

In Stoc

Active balancing module for 2S Lead-Acid batteries, optimizes charging and extends battery life by transferring energy from the more charged battery to the less discharged one when the difference exceeds 50 mV. Offers up to 10A of balancing current, backlit display for quick monitoring, mounts on the rail and allows multiple modules to be interconnected in series for multi-battery systems.

83.85 €

Female connector, PH2.0, 2P, straight

In Stoc

PH2.0 female connector with 2 straight pins, ideal for quickly making connections on PCB boards and wiring in electronic projects. The 2 mm pin pitch ensures compatibility with the PH2.0 standard, and the 2P configuration provides a stable connection in applications such as sensors, modules and signal supplies.

0.10 €

Relay module with optocoupler, High or Low level selectable, 2 channels, 5V

In Stoc

Quickly control AC or DC loads from Arduino and other development boards, with optocoupler isolation for safe control. It has 2 channels, selectable High or Low trigger via jumper, 5V power and logic level, 10A relays at 250VAC or 30VDC. Green LED for power and red LED for activation give you immediate visual confirmation.

2.77 €

PH2.0 connector set, 460 pieces, 2-6P

Last items in stock

Complete set for quickly making connections on PCB boards, prototypes and wiring. Includes 460 pieces PH2.0 with 2-6 pin connectors, male and female housings, plus 300 metal pins for crimping. Suitable for electronic repairs and projects, it offers wide compatibility, size organization and reliable contacts for stable connections.

6.25 €

Digital balance charger, B6 V3, 80W, Lipo, Li-Ion, LiHv, NiMh, NiCd

Last items in stock

Professional digital charger with balance for LiPo, Li-Ion, LiHV, NiMh and NiCd batteries, offers precise charging up to 80W and 6A, automatically identifies the number of cells and ensures individual balance. Includes discharge and Storage Mode functions for battery maintenance, internal resistance test and temperature sensor input, with stable microprocessor control and LCD display.

57.06 €

Digital charger with LCD, ToolkitRC, M6D, 500W, 2 channels, 1-6S

Last items in stock

Smart dual-channel charger for 1-6S batteries, delivers up to 500W in synchronous mode for fast charging of a single pack or 2x250W for two batteries simultaneously. The color IPS screen and navigation wheel make settings quick and clear. Measures internal resistance on cells to check battery health, and Recycle mode efficiently discharges to storage.

109.62 €

Battery storage module, 2-6S, 1W, XT60

In Stoc

Plug and forget mode for bringing LiPo and Li-Ion batteries to storage voltage, automatically discharges up to 3.85V per cell and stops itself when reaching the target. Automatically identifies the number of cells, works with 2S-6S batteries on XT60 connector, 1W dissipation for controlled discharge and very low consumption after completion.

12.05 €

Storage mode for Lithium batteries, 2-6S, 0V mode, XT60 and XT30

Lithium battery storage module, 2-6S, 0V mode, XT60 and XT30

In Stoc

Practical way to bring Lithium batteries to 3.8V per cell storage voltage, ideal for long-term storage, supports 2S-6S packs and includes 0V jumper option for full discharge upon disposal. Features XT60 and XT30 connectors for quick compatibility, total voltage display and status LED for discharge monitoring.

14.06 €

Out-of-Stock

Lithium battery balancing and discharging module, 2-6S, adjustable

Out-of-Stock

Module for testing, balancing and discharging 2-6S lithium batteries, ideal for quickly checking the voltage on each cell and equalizing them for correct charging. It has button settings, XH2.54 connector for balancing, works directly from the connected battery, allows adjustment of the balance voltage and discharge threshold for LiPo, LiHV, LiIon and LiFe.

16.48 €

Panel Thermostat, W3230, 12V, 20A, Heating, Cooling

In Stoc

Panel thermostat module with NTC probe, 12VDC power supply, ideal for automatic heating or cooling control in electrical cabinets, incubators or HVAC systems. Offers 20A relay switching, dual PV and SV display for quick reading, temperature calibration for accurate measurement and alarm function when exceeding the threshold. Memorizes settings when power is cut off.

5.19 €

TATTU R-LINE LiPo battery, 4S1P, 4S, 1550mAh, 120C, Version 3.0, 14.8V, XT60

In Stoc

LiPo battery for FPV drones, designed for fast current delivery and firm throttle response, 4S 14.8V 1550mAh, 120C discharge rate for constant power in flight, XT60 connector and JST-HX balance plug for correct charging, version 3.0 for stable performance in competitive setups.

46.23 €

Out-of-Stock

TATTU R-LINE LiPo battery, 6S1P, 6S, 1550mAh, 120C, Version 3.0, 22.2V, XT60

Out-of-Stock

LiPo battery for FPV drones, designed for power and fast response to acceleration, 6S 22.2V 1550mAh with 120C discharge rate for constant current delivery. Version 3.0 offers high performance in demanding flights, includes XT60 connector and JST-HX balance plug for correct charging, compact format and weight of 256 g.

60.38 €

TATTU R-LINE LiPo battery, 4S1P, 4S, 1800mAh, 120C, Version 3.0, 14.8V, XT60

In Stoc

LiPo battery for FPV drones, optimized for fast power delivery and consistent flight response. Offers 14.8V in 4S configuration and 1800mAh for balanced autonomy, 120C discharge rate with 240C burst for powerful accelerations, XT60 connector and JST-HX balance port for secure connection and correct charging.

54.32 €

Electronic components

Subcategories