Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DC to Dual Voltage Converter Module, TPS5430, 3-24V to 5V
DC-DC converter with dual ±5V output, ideal for powering operational amplifiers, data converters and automation equipment. Accepts 5.5-28V input, delivers up to 3A on the positive branch, switches at 500kHz for stability, high efficiency up to 95 percent, includes ON OFF, LED and overcurrent and overheating protection, secure connections on screw terminals.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Mode
the DC voltage converter to dual voltage (positive and negative), which uses the integrated TPS5430, capable of a maximum current of 3A and an output of 5VDC. This module represents a high-efficiency power supply solution, intended for applications that require stabilized, positive and negative voltage sources. This module is ideal for powering operational amplifiers, data converters, and various equipment in the field of industrial automation, LED lighting, industrial control equipment, communication equipment and instrumentation.
The module supports an input voltage between 5.5 and 28VDC, with a maximum conversion efficiency of 95%.
This module is a voltage reducer, which is why the supply voltage must be higher than the output voltage (minimum 10%). The voltage conversion is reset to 500kHz.
The module integrates over-current protection and automatic overheating shutdown.
It should be noted that the negative voltage conversion pressure is lower than the positive voltage pressure and that the conversion efficiency in real use is actually somewhere around 85%.
This module integrates an ON/OFF button and presents a screw terminal for input and output power supply. The output is arranged in a practical and orderly way, having two terminals for positive voltage, two terminals for negative voltage and two terminals for GND.
The output voltage can be adjusted by changing resistors R1 and R2, according to the picture below.
Specifications:
Input Voltage: DC 5.5V - 28V (ideally below 21V)
Output Voltage: ±5VDC
Integrated: TPS5430
Module Type: Switching power supply
Switching Frequency: 500kHz
Output Current: 3A (max), recommended for long-term use below this value, 2.5A (max) for negative pressure
Input/Output Voltage Difference: Approximately 1V
Output Power: 15W (5V/3A)
Static Power Consumption: 16mA
Output Noise (ripple): 24mV for +5V, 56mV for -5V
Operating Temperature: 0-70°C
Interface Pins: Screw terminals, 5.08-2P x 4 connectors
Module dimensions: 50 x 50 x 12mm
Characteristics:
High Efficiency: The optimal theoretical conversion rate can reach 95%, with a measured efficiency of about 88%.
Protection: The module includes overheat protection and overcurrent protection functions, but does not include reverse polarity protection or circuit fuses.
Power Indicator: The module is equipped with an LED indicator that confirms the presence of the appropriate output voltage.
Thermal Dissipation: It requires attention to heat dissipation, especially at high loads. It is recommended to use cooling fins to keep the temperature within safe limits.
Use:
Make sure that the input voltage does not exceed 28V and is at least 1V higher than the desired output voltage to ensure stable operation.
Connect the power supply to the VCC and GND terminals of the module.
Connect consumer devices to the corresponding output terminals, respecting the polarity.
IMPORTANT: In the case of long-term use at close to maximum capacities, monitor the module for signs of overheating and consider improving the cooling solutions.
ATTENTION, the negative output produces a lot of heat! We do not recommend using the negative output in the long term or, in any case, carefully monitor the heat emitted by the module.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
