Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Voltage converter module 3-24VDC to dual voltage, 5V, 8W
DC-DC converter with stable dual output, ideal for symmetrical power supply in audio applications, car amplifiers, LCD and measuring instruments. It works step-up and step-down with wide input 3-24VDC, preset output ±5V and power up to 8W, efficiency 70-90% and low standby consumption. The output voltage can be adjusted by changing the SMD resistor R1.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
DC-DC voltage converter module with double voltage output (plus and minus). It can manage a varied range of input voltages, between 3 and 24VDC and can provide multiple output voltages both positive and negative. It is ideal for applications that require a stable dual power supply, such as audio equipment, car amplifiers, LCD power supply and measurement equipment.
The module comes factory set on the output voltage of 5VDC but can be reconfigured to output a different voltage, by simply replacing the resistor R1 (caution, this is SMD).
The module works
To obtain a more stable voltage, it is recommended that the output be greater than 10mA.
V- cannot be used alone, otherwise there will be no voltage output. V+ can be used individually.
This module works both as a step-down and step-up voltage and can provide a maximum power of 8W (we recommend up to 5W).
DO NOT EXCEED THE MAXIMUM SUPPLY VOLTAGE OF 24VDC!
Specifications:
Supply Voltage: 3-24VDC
Output Voltage (preset): ±5V
Possible output voltages: ±3-24VDC, depending on the R1 resistor value
Maximum Output Power: 1-8W
Conversion efficiency: 70-90%
Standby current: 3-4mA
Accuracy: Positive voltage ±3%, Negative voltage ±5%
Working frequency: 400kHz
Operating Temperature: -40~+85°C
Dimensions: 42 x 24 x 15mm
Power table:
| Output Voltage | Input Voltage Range | Maximum Output Current (A) |
|---|---|---|
| ±5V | 3V/3.3V/3.7V/5V/6V/9V/12V/15V/18V | 0.1-0.8 |
| ±6V | 3V/3.3V/3.7V/5V/6V/9V/12V/15V/18V | 0.1-0.7 |
| ±9V | 3V/3.3V/3.7V/5V/6V/9V/12V/15V/18V | 0.04-0.6 |
| ±10V | 3V/3.3V/3.7V/5V/6V/9V/12V/15V/18V | 0.03-0.55 |
| ±12V | 3V/3.3V/3.7V/5V/6V/9V/12V/15V/18V | 0.03-0.46 |
| ±15V | 3.3V/3.7V/5V/6V/9V/12V/15V/18V | 0.03-0.41 |
| ±18V | 3.7V/5V/6V/9V/12V/15V/18V | 0.04-0.31 |
| ±24V | 3.7V/5V/6V/9V/12V/15V/18V | 0.03-0.25 |
Integrated Functionalities:
Frequency compensation
Soft-Start function
Thermal Protection
Current Limiting
Connecting and Configuring the Module:
Make sure that the input voltage does not exceed the maximum allowed range of 3-24V.
Configure the desired output voltage by changing resistor R1 if a different voltage than the one set in the factory is required.
The following formula can be used to determine the value of R1 depending on the desired tension:
R 1 = 2000 ( 1.25 V o u t − 1 )
This formula returns R1 value in Ohms.
Connect the module to the appropriate power source and consumer, making sure that the input power is greater than the output power to compensate for the module's own consumption.
Operation and Adjustments:
Monitor the output using a multimeter to ensure that the output voltage is correct and stable.
If the output voltage is lower than the nominal voltage, check if the input power supply provides enough power.
If the negative voltage is not present or is too low, check if the co-denominator is correctly connected to both the positive and negative voltage terminals.
Negative voltage cannot be used alone. When using a negative voltage, a similar load must be connected to the positive voltage terminal.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
