Ramps 1.4 LCD and SD card adapter

In Stoc

Allows you to connect a 2004 or 12864 LCD display with controller to the Ramps 1.4 board, for quick control of the 3D printer without a PC. Includes SD card reader for direct file playback, IDC connectors for simple wiring, compatibility with Marlin and other common firmware, easy assembly and stable integration into the system.

Ft693.69

M3 Screw Set with Spring and Nut, 3D Printer Bed

In Stoc

3D printer bed height adjustment kit, ideal for fast and stable bed leveling. Includes 40mm M3 screw, spring and knob with nut, made of stainless steel for strength and long-lasting use. M3 thread ensures easy compatibility with most platforms and fine tension adjustment.

Ft227.93

2GT tensioner pulley, 5mm, without teeth, 10mm belt

In Stoc

GT2 tensioner pulley with smooth surface for tensioning and guiding 10mm 2GT belts in 3D printers and CNC mechanisms. It has bearings with an inner diameter of 5mm for mounting on common axes, is made of aluminum for strength and low weight, outer diameter 17mm with guiding edges and useful width 10mm.

Ft935.49

Connector PC6-01, Yellow, M10, 6mm

In Stoc

Pneumatic connector for quick and safe connection of PTFE tubes with 6mm outer diameter, ideal in compressed air installations and automation. It has M10 thread for easy assembly, allows the passage of 6mm tube, ensures good sealing and easy disassembly, yellow finish for quick identification in the assembly.

Ft455.86

MKS Gen V1.3 Motherboard, Ramps 1.4, 3D Printer

Last items in stock

Integrated motherboard for 3D printer control, combines MEGA2560 and Ramps 1.4 in a single PCB for easier wiring and increased reliability. Supports up to 5 replaceable stepper drivers compatible with A4988, DRV8825 and TMC2100, operates at 12-24VDC with dedicated power supply and efficient MOSFETs for better heat dissipation, is Marlin compatible and supports LCD 2004 or 12864 with SD.

Ft24,970.97

Inductive proximity sensor SN04-P, NO, 10-30V, PNP

In Stoc

3-wire PNP inductive sensor for detecting metal proximity, useful in automation, CNC and industrial projects, detects up to 5 mm depending on the surface and can also work through thin non-metallic materials, 10-30VDC power supply, NO contact with PNP output, red status LED and IP67 protection for use in harsh environments.

Ft1,352.70

Stabilizer filter for stepper motor

In Stoc

The module interleaved between the 3D printer motherboard and the stepper motor optimizes the signal for smoother movement. Reduces vibration and noise, improves the smoothness of printed surfaces and reduces the banding effect. Uses 8 freewheeling flyback diodes for pulse stabilization, compact 40 x 30 mm format, compatible with most 3D printers.

Ft712.52

Shield Ramps 1.6, R6, 5 axes, 12V, 200W

In Stoc

The Ramps 1.6 Shield for Arduino Mega is a 5-axis control board for 3D printers or CNCs, supports 5 A4988, DRV8825 and other drivers simultaneously, provides 12V and 200W power supply with B55NF06C MOSFET up to 10A. Includes gold-plated connectors for secure contact, full heatsink for efficient dissipation and extended power up to 270W, plus a new 2-pin connector.

Ft4,077.92

1.75 filament sensor, 3D printer, 1m cable

In Stoc

Kit for detecting filament interruption in 3D printers, stops printing and allows resumption after repair. Compatible with 1.75 mm filament, includes detector module and 1 m cables, 3.5-5 V power supply with HIGH/LOW signal output at the supply voltage level. It has 3 wires for power and signal, easy mounting with 3.5 mm holes and insertion direction marked on the housing.

Ft1,212.97

Connector PC4-01, Yellow, M10

In Stoc

Pneumatic connector for 4mm PTFE tube, ideal for 3D printers, especially for mounting in the E3D print head assembly with M10 thread. Ensures firm fixation of the tube by locking, the tube cannot be pushed or pulled, does not allow the tube to pass beyond the thread. Inner diameter 3mm, yellow finish for quick identification.

Ft455.86

V-Slot roller, POM, type C, 5x15x8.8mm , MR105ZZ

In Stoc

The V-Slot C type POM roller with two MR105ZZ bearings ensures smooth and precise sliding on V-slot aluminum profiles such as 2020, ideal for 3D printer axes and compact CNC systems. It has a 5mm hole, dimensions 5x15x8.8mm , silent running, low wear and good stability in repeated movements.

Ft720.45

Power Mosfet Module, 3D Printers, 12-24V, 25A

In Stoc

Allows control of the 3D printer heated bed from the motherboard signal, but with a stronger external power supply, reducing the stress and temperature of the board and extending its lifespan. Operates at 12-24VDC, supports up to 25A, is compatible with PID control, compact dimensions 50x60 mm for easy installation.

Ft1,561.80

M3 hexagon head screw set, 300 pieces, flat head

In Stoc

Set of 300 M3 screws with internal hexagon head for precise assemblies in electronics, fine mechanics and DIY projects, includes 180 flat head screws in lengths M3x5 to M3x20 with the length measured on the thread, plus 120 M3 nuts, the Allen head offers secure tightening and easy access in tight spaces, organized for quick selection and efficient assembly.

Ft6,538.55

Pneumatic connector PC4-M6, CR10

In Stoc

Quick pneumatic connector for 4 mm PTFE tube, ideal for Creality Ender 3D printers and other Bowden systems with M6 threaded extruder. Ensures firm fixation of the tube and constant filament supply, easy to assemble, has a precise M6 thread, is made of brass for strength and durability.

Ft526.22

E3D V6 heating block, new version

In Stoc

Aluminum heating block for E3D V6 J-head heads, ideal for stable extrusion and efficient heat transfer. Accepts M6 threaded nozzles, has a 6mm hole for the heating cartridge and 3mm for the sensor, compatible with PT100. New Volcano type version, with screw-on thermistor fixation, suitable for 1.75 or 3mm filament.

Ft744.23

Complete Ender 3 hotend kit, 12V, 40W

In Stoc

Complete set for quick replacement of MK8 type hotend on compatible Creality printers, includes assembled head with 0.4 mm nozzle, thermistor, 12V 40W heating cartridge, connectors and PTFE tube. Aluminum, stainless steel and brass construction for thermal stability, working temperature up to 260 C, MK8 compatible silicone cover for insulation and more consistent printing.

Ft4,987.65

2GT timing pulley 20 teeth, 5mm, 10mm belt

In Stoc

Ensures precise transmission of motion in timing belt mechanisms, suitable for 3D printers, CNC and automation. 2GT profile for constant pitch and reduced slippage, 20 teeth for balanced ratio, compatible with 10mm belt, 5mm bore for quick mounting on shaft.

Ft568.83

Silicone protection MK8, MK7

In Stoc

Heat-resistant silicone cover for the MK7 and MK8 heating block, effectively protects against melted plastic and dirt, helps maintain stable temperature, especially when using a cooling fan for printing, withstands up to 260 degrees C, color varies depending on the batch, heating block is not included.

Ft302.25

Self-adhesive printing surface, 214mm

In Stoc

Self-adhesive surface for the 3D printer bed, provides a stable base for printing and adheres firmly to the platform. It is quickly mounted thanks to the adhesive layer on the back, can be easily cut to fit any bed shape. It has dimensions of 214 x 214 mm, black finish, good resistance to repeated use.

Ft1,920.54

Kapton tape 25m, 25mm

In Stoc

Kapton Tape 25m, 25mm is ideal for masking and electrical insulation in high temperature applications such as PCB protection and industrial processes. The polyimide film with silicone adhesive withstands up to 260 C long term and 300 C short term, has excellent heat and solvent resistance, minimal bake shrinkage and removes cleanly.

Ft2,183.15

Print head nozzle 0.5mm , MK8

In Stoc

Ensures precise extrusion and uniform finish in 3D printing, being made of bronze for strength and good heat transfer. Compatible with most MK8, MK7, E3D V5 and E3D V6 extruders, has M6 thread and 0.5 mm diameter for a good balance between detail and speed. Suitable for 1.75 mm filament.

Ft396.40

Teflon tube PTFE, 2x4mm, filament 1.75, 1 meter

In Stoc

PTFE tube for smooth guiding of 1.75 filament in 3D printers, reduces friction and improves feeding to the extruder. Size 2x4 mm, length 1 m, Teflon material with good temperature and wear resistance, smooth interior for constant flow and wide compatibility with Bowden systems.

Ft678.83

Out-of-Stock

Insulating tube 600C, 5mm, 1 meter

Out-of-Stock

Fiberglass insulating tube for protecting cables and conductors in high temperature areas, withstands up to 600C, diameter 5mm with tolerance +/- -0.3mm , delivered in 1 meter lengths, for larger orders add multiples of 1 meter up to 100 meters.

Ft165.50

Stepper motor, Nema17, 1.8 degrees, 42x42x48mm

In Stoc

Nema17 stepper motor for CNC and 3D printer applications, offers precise control at 1.8 degrees per step and 560 mN.m. holding torque. Operates at 3.06 V and 1.7 A, has 2 phases for stable movement, compact dimensions 42x42x48 mm and 5 mm shaft. Includes 4-wire connector for quick integration.

Ft5,584.23

Complete hotend kit, Ender 3 compatible, 24V, 40W

In Stoc

Complete kit for quick replacement of the hotend on Ender 3, provides stable printing and constant filament flow. Includes head assembled with 0.4 mm nozzle, 24V 40W heating cartridge and thermistor, supports up to 260C, aluminum, stainless steel and brass construction, comes with pneumatic connectors and PTFE tube for precise feeding.

Ft4,111.62

NTC thermistor 100k

In Stoc

NTC thermistor with wire and glass head for precise temperature measurement of heating cartridges for 3D printers, 100K Ohm at 25C with 1% accuracy, supports up to 300C in the range -40 to +300C, 1m cable for flexible mounting, model NTC 3950 with 2mm head for fast response.

Ft792.79

Control module 3D printer, display 12864, Ramps 1.4, SD card

3D Printer Control Module, 12864 Display, Ramps 1.4, SD Card

In Stoc

Control panel with 12864 LCD for RAMPS 1.4, allows you to run prints directly from SD card without PC, clearly displays printing status and progress, quick menu navigation with rotary encoder for settings, calibration and axis movement, includes buzzer for feedback and STOP button for quick stop, adjustable contrast from potentiometer.

Ft7,595.94

New

PTFE Tube for 3D Printers, ID 2.5mm, OD 4mm, 1m

In Stoc

Guide 1.75 mm filament to the extruder with minimal friction for consistent feeding and cleaner prints. PTFE with excellent glide, 2.5 mm ID and 4 mm OD, 1 m length, easy to cut to the desired size. Compatible with PC4-M6 and PC4-M10 connectors, recommended as a replacement for Bambu Lab and AMS.

Ft895.85

Kapton tape 25m, 50mm

In Stoc

Kapton tape 25m, 50mm is ideal for PCB masking and protection, electrical insulation and fixing in high temperature areas. The polyimide film with silicone adhesive withstands up to 260 C continuous and 300 C short term, has excellent heat and solvent resistance, minimal shrinkage after baking and removes cleanly.

Ft4,219.64

LED Lamp Holder, for 3D printed lamps, 5V USB

In Stoc

The LED base with 5V USB power supply is ideal for 3D printed lamps and for highlighting ornaments made of resin, glass or other translucent materials. It provides uniform white light, has a round wooden base for stability, low energy consumption and a 1 m cable with ON OFF switch for quick start and easy use.

Ft1,438.92

Fast printing nozzle, MK8, 0.4mm

In Stoc

High Flow MK8 0.4mm Nozzle for 3D Printing, allows for higher speeds through the split internal channel that increases filament contact with the heated area. Copper interior for fast heat transfer, brass exterior for strength and durability. Compatible with MK8 hotends, including Ender 3 printers.

Ft1,014.77

MK8 printing nozzle, 0.4mm , PTFE coated

In Stoc

The 0.4mm MK8 nozzle ensures precise extrusion and uniform layers for stable 3D printing. The calibrated tip offers good details and consistent flow, the PTFE-coated base reduces material adhesion and the risk of clogging, the wear-resistant construction maintains performance over time, compatible with MK8 hotends for quick replacement.

Ft599.55

PTFE tube cutter, 90 degrees

In Stoc

Mini portable cutter for precise 90 degree cutting of PTFE tubes, ideal for 3D printing and replacing the tube end in the hotend area. The V-guide holds the tube correctly, and the triangular stainless steel blade cuts by sliding for a clean section, without deformation. Helps to form a tight seal with the print head, reducing the risk of leaks and blockages.

Ft837.39

Ball joint, M4, external thread, SA4T

In Stoc

SA4T ball joint with M4 external thread on the right, ideal for Delta 3D printer arms and guide rods, ensures precise movement and angle compensation in mechanisms. It is made of steel for strength, has a total length of 36mm, a thread of 21mm and an inner ball diameter of 4mm.

Ft681.80

Filament pusher kit for Creality, aluminum, red, RIGHT

In Stoc

Full metal upgrade for Creality printer extruder, replaces plastic pusher and improves stable filament feeding. Aluminum alloy block, direct mounting on stepper motor, right-hand drive, includes filament guide close to gear for better control, especially useful for flexible materials. Compatible MK8, CR-7, CR-8, CR-10, CR-10S, 1.75 mm filament.

Ft3,745.94

Filament pusher kit for Creality, aluminum, red, LEFT

In Stoc

Full metal upgrade for Creality printer extruder, replaces plastic pusher with aluminum alloy one for more precise and durable feeding. Mounts directly on stepper motor, compatible with MK8 Bowden extruders and CR-7, CR-8, CR-10, CR-10S models. Includes filament guide close to the gear wheel, especially useful for flexible materials, LEFT drive, for 1.75 mm filament.

Ft3,058.20

Magnetic printing surface, Creality, 235x235, for Ender-3

In Stoc

Flexible and removable magnetic surface for Ender-3, offers good adhesion to printing and quick release of parts by bending. Includes self-adhesive magnetic layer that attaches to the heated bed, plus rough printing plate, size 235x235 mm, withstands up to 70°C to maintain magnetic force.

Ft8,436.30

Out-of-Stock

Insulating tube 600C, 10mm, 1 meter

Out-of-Stock

Fiberglass insulating tube for protecting cables and conductors exposed to high temperatures, withstands up to 600C, diameter 10 mm with tolerance +/-0.5 mm, length 1 meter, flexible and suitable for industrial and electrical applications where reliable thermal insulation is required.

Ft331.98

e3d print head nozzle 0.2mm

In Stoc

0.2 mm bronze nozzle for 3D printers, ideal for fine details and precise finishing. Compatible with most MK8, MK7, E3D V5 and E3D V6 extruders, it mounts easily via M6 thread and is suitable for 1.75 mm filament, providing consistent extrusion and clean results.

Ft396.40

E3D V6 aluminum support, U shape

In Stoc

Aluminum support for the E3D V6 print head, U-shaped, ensures stable mounting and correct alignment of the assembly, the material helps dissipate heat in the upper area to reduce the risk of blockages caused by softening of the filament. Lightweight and durable construction, direct compatibility with E3D V6, ideal for more reliable prints.

Ft1,162.43

Support plate for E3D V6 extruder, aluminum

E3D V6 extruder support plate, aluminum

In Stoc

Aluminum support for mounting the E3D V6 extruder, ensures rigid fixation and correct alignment of the print head. The metal material helps dissipate heat in the upper area, reducing the risk of clogging and improving printing reliability. Precise, lightweight and durable construction, direct compatibility with E3D V6, quick assembly in common 3D printer assemblies.

Ft994.95

Filament pusher kit for E3D V6, 3 to 1 reducer

In Stoc

3-to-1 reduction pusher for E3D V6, with support for Direct Drive and Bowden, increases feed force and improves filament grip for stable extrusion and more precise retraction. Helps print TPU flexible filaments more easily including long Bowden paths, is compatible with 1.75 filament and Nema17 motor, stainless steel and plastic construction for durability.

Ft3,946.12

Filament pusher kit, double gear, BMG, with 3 to 1 reducer

Last items in stock

BMG dual gear extruder with 3 to 1 reducer, ensures precise and slip-free filament feeding for stable prints, adjustable clamping tension easily adapts to different materials, compatible with 1.75 mm filament, mounts on most Bowden 3D printers, works with Nema17 motors, stainless steel and plastic construction.

Ft5,786.39

Autolevel sensor for 3D printers, 3D Touch

In Stoc

Allows you to add autoleveling to your 3D printer, measures the bed at multiple points on the Z axis for a constant distance between the nozzle and the surface and automatically corrects during printing. Operates at 5V, springless mechanical drive, includes 1 m cables and simple connection on 3 control pins and 2 Zmin pins.

Ft7,972.51

Hotend heating cartridge, 24V, 40W, 6x20mm

In Stoc

Ensures fast and stable heating of the hotend for constant extrusion on 3D printers, compatible with Ender 3 on 24V. Offers 40W power to maintain temperature, stainless steel housing for durability, 6x20mm cartridge format for easy mounting, 100cm cable for flexible connection.

Ft667.93

Blue Teflon tube, PTFE, 2x4mm, filament 1.75mm, 1 meter

Blue Teflon Tube, PTFE, 2x4mm, 1.75mm filament, 1 meter

In Stoc

Blue PTFE tube for precise guidance of 1.75mm filament, reduces friction and improves feeding in 3D printers, compatible with Bowden extruders and use in the thermal head, made of temperature and wear-resistant Teflon, inner diameter 2mm and outer diameter 4mm, length 1 meter cut to order.

Ft1,311.08

Concave gear wheel, MK8, 9x5x11mm, steel

In Stoc

Concave wheel for filament pusher, compatible with MK8 extruder, ensures constant feeding and good adhesion on 1.75mm. It is made of steel for wear resistance, has an inner hole of 5mm, outer diameter of 9mm and length of 11mm. Fastening to the shaft is done quickly with M4 grub screw.

Ft410.27

Concave gear wheel, MK7, 12x5x13mm, steel

In Stoc

Concave filament pusher wheel, ideal for MK7 extruders, ensures stable drive and uniform feeding of 1.75mm. Made of steel for wear resistance, has an outer diameter of 12mm and a length of 13mm, mounts on a 5mm shaft and is securely fixed with an M4 grub screw.

Ft412.25

3D and CNC printers

Subcategories