Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Two-component Mixing Tray with Spatula, PLA, 50x70mm
Compact tray with spatula for quick mixing of two-component adhesives, 3D printed from PLA, offers 50x70mm inner surface and good control when dosing. Spatula with two flat ends, 5.5mm and 3.5mm , allows efficient homogenization and direct application to the work area. Reusable, easy to clean immediately after use.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Compact tray with spatula for mixing two-component adhesives. Made of PLA plastic by 3D printing. It comes with a spatula with two flat ends (one 5.5mm wide, the other 3.5mm ).
The included spatula is optimally sized for efficient homogenization and direct application of the mixture to the desired surfaces.
To be reusable, the spatula and tray require immediate washing before the adhesive hardens.
Specifications:
Material: PLA plastic (3D printed)
Tray dimensions: 55 x 75 x 6.97 mm
Spatula dimensions: 7.8 x 98.7 x 4 mm
Inner dimensions: 50 x 70mm
Compatibility: two-component adhesives (e.g. Poxipol)
Type: reusable, with immediate cleaning after use
Use:
Make sure the surface of the tray is clean and dry. A 70x50mm sheet can be added to the tray to better preserve the surface of the tray.
Dispense equal amounts of two-component adhesive directly into the tray.
Mix the components well with a spatula until you obtain a homogeneous mixture.
Apply the adhesive to the desired surfaces using the spatula.
Clean the tray and spatula immediately with a damp cloth, before the adhesive hardens.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
