Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Solenoid valve 12V, Water/Air, N/C, 1/2
12VDC solenoid valve for water or air, normally closed, opens when voltage is applied, ideal for automation and flow control in pressure installations. 1/2 connection, metal and plastic body, operates up to 0.8MPa and 100C, diaphragm type for low viscosity liquids.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Electromagnetic valve that allows the circuit to open when a 12VDC voltage is applied using a solenoid.
The model is Normally Closed (opens when 12V voltage is applied).
It is not recommended for use in gravity feed systems.
Important: A resistor and capacitor circuit is recommended to prevent the solenoid valve from overheating. It requires a higher current only during the solenoid actuation phase, and then consumes a much lower current to maintain it. Prolonged use with a high current will lead to overheating and failure of the solenoid valve, which is not covered by the warranty!
Specifications:
Supply voltage: 12VDC
Recommended current: 0.6-1.5A
Connection size: 1/2"
Material: Metal + plastic
Pressure: 0.02- 0.8Mpa
Maximum liquid temperature: 100°C
Operating mode: Normally Closed
Valve type: diaphragm
Use: water and low viscosity liquids
Dimensions mm: 78 x 60mm
Inner diameter: 13.5mm
Outer diameter: 20mm
Flow characteristics:
0.02MPa: >3L/min
0.1MPa: 5L/min
0.3MPa: >10L/min
0.8MPa: <25L/min
Flow characteristics:
0.02MPa: >3L/min
0.1MPa: 5L/min
0.3MPa: >10L/min
0.8MPa: <25L/min
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].