Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Silicone cable set, 20AWG, 30m, 5 colors
20AWG silicone cables, 30 m total in 5 colors, ideal for aeromodelling, drones and RC models, for motor-ESC connections and power supply. Multi-stranded tinned copper conductor for good conductivity and reduced oxidation, flexible silicone insulation resistant up to 200C, 6 m on each roll, practical box for easy storage and unwinding.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Silicone cable set, multi-wire, with temperature-resistant insulation, 20AWG, perfect for use in Aeromodelling, RC models, Drones, etc...
The conductor is composed of 100 wrapped 0.08 wires, tinned (Tinned Copper Wire) to improve conductivity (copper oxidizes more easily than tin) and wrapped in silicone insulation that can withstand up to 200 degrees C.
This wire (20AWG) is also used in many FPV drones to make the connection from the motor to the ESC.
The length of 50 meters refers to the total length of all the cable rolls. Each roll is 10 meters.
The box is made to allow the rollers to be kept inside it and the individual wires to be taken out through the dedicated holes.
Secifications:
Standard: 20AWG
Conductor: Multifilar core
Material: tinned copper
Individual core wire thickness: 0.08mm
Core thread count: 100
Nominal voltage: 600V
Insulation: Soft silicone
Insulation resistance: -60 - +200 degrees C
Outer size: 1.8mm (core plus insulation)
Colors: 5, Red, Black, Yellow, Blue, Green
Length of each color: 10 Meters
Total length: 50 meters, all rollers
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
