Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Acoustic suspension kit, ultrasonic, DIY, 12VDC, 16mm, 40KHz
DIY acoustic suspension module, allows a polystyrene ball to be levitated between two ultrasonic emitters, ideal for educational demonstrations and lab experiments. Operates at 12VDC, uses 16mm speakers, generates ultrasound at 40MHz and includes expanded polystyrene for quick testing.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The ultrasound generator module that allows the levitation of ultralight objects using a frequency of 40MHz.
The kit includes a piece of expanded polystyrene that you will use for levitation.
This product does not necessarily have a practical purpose but can be used for educational purposes to demonstrate the idea of using sound waves to manipulate physical objects.
Specifications:
Supply voltage: 12VDC
Suspended object: Ball of expanded polystyrene
Ultrasound diffuser diameter: 16mm
Generated frequency: 40MHz
Use:
A ball will break from the expanded polystyrene. Power the module at 12VDC, turn on the ultrasonic emission and place the ball between the two ultrasonic emitters. The sound wave generated will keep the polystyrene ball in suspension.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
