Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Shield Joystick, v1.A, 2 axes plus buttons, 3.3-5V
Joystick shield for Arduino UNO compatible boards, ideal as a game remote or robotic arm controller. Offers 2-axis joystick with analog readout A0 A1 and button on D8, 6 dedicated buttons on D2-D7, 3.3V 5V switch for quick compatibility, connectors for nRF24L01 module or Nokia 5110 LCD and easy access to pins through marked header.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Shield joystick compatible with compatible Arduino UNO development boards that allows the realization of projects such as robotic arm controller or game remote control.
It has a slide that allows the use of 5V or 3.3V development boards ( Make sure you set the switch in the correct position before connecting ).
Specifications:
Operating voltage: 3.3V or 5V, selectable
Joystick 2 axes
4 large buttons
2 small buttons
nRF24L01 interface
Nokia 5110 LCD interface
Power switch to switch between 3.3 and 5V
Login:
Joystick:
X axis: A0
Y axis: A1
Button: D8
The analog inputs read by the microcontroller are between 0 and 1023. In the middle position (free), the values should be 512, that is half.
Pressing the joystick triggers a button connected to pin D8.
Buttons:
There are a total of 6 physical buttons on the board.
4 large buttons, easily accessible, with colored cover and 2 small buttons, harder to access and usually used for rarely used functions. Their positioning in a more inaccessible position is done to prevent accidental pressing.
A button: D2
B button: D3
C button: D4
D Button: D5
E Button: D6
F button: D7
NRF24L01:
GND - Ground
VCC - 3.3V
CE - D9
CSN - D10
SCK - D13
MOSI - D11
MISO - D12
IRQ - Free
Nokia 5110:
The mother connectors present on the board are present for an easy connection of a Nokia 5110 LCD screen that offers a 48x48 pixel matrix
This interface occupies pins D9-D13 used in common with the pins for NRF24L01, which is why the display and the NRF24L01 module cannot be used together.
Interface connector:
It is a double line colored yellow for accessing all the buttons, the joystick, 3.3V, GND and 5V. The pinout is marked on the board.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
