Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
RP2040 Compatible Development Board, Cortex M0, 2MB Flash
Compact board for DIY projects and rapid prototyping, with RP2040 compatible dual core Cortex-M0+ chip at 133MHz, 2MB Flash and 264KB SRAM for stable embedded applications. Offers flexible connectivity via GPIO, PWM, I2C, UART and SPI, easy programming via USB-C drag and drop, plus integrated WS2812 RGB LED for visual feedback in small and wearable projects.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Compact development board, based on a low-cost chip compatible with RP2040. This board offers a low-cost and versatile solution for DIY projects, rapid prototyping and embedded applications.
The compact dimensions of the RP2040-Zero make it suitable for projects that require a small profile, such as wearable devices or other applications where space is limited.
The board offers an integrated addressable RGB LED on the GP16 pin.
It comes equipped with the RP2040 compatible chip, with two ARM Cortex-M0+ cores, providing solid and efficient performance for handling complex tasks. The board includes 264KB of SRAM memory and 2MB of flash memory to store the code and data needed for projects.
Connection interfaces are abundant on this development board and include digital and analog GPIO pins, PWM pins, and I2C, UART, and SPI interfaces, allowing easy connection of sensors and other peripheral components.
The board has support for multiple programming languages, including MicroPython and CircuitPython, which facilitates the programming and application development process for users with programming experience or for those who want to learn to program.
This product integrates accelerated FP (Floating-Point) libraries to perform mathematical calculations efficiently and quickly, using the hardware and software optimizations available on the chip. It also integrates an integrated temperature sensor and a precision timer clock.
It can be programmed in drag and drop mode, using USB mass storage.
The board supports Low-Power sleep modes and Dormant mode (device inactive until an input is received).
The I/O pins are 3.3V. Do not use more than 3.3V or the board will burn out . For use with 5V sensors and modules, use a logic level translator.
Specifications:
Power supply: 5VDC, via USB
Logic voltage: 3.3V
Chip: RP2040 compatible with two ARM Cortex-M0+ cores
Processor frequency: 133MHz
SRAM memory: 264KB
Flash memory: 2MB
Interfaces: Digital GPIO, Analog GPIO, PWM, I2C, UART, SPI
Programming language compatibility: MicroPython, CircuitPython
USB interface for programming and communication with the computer: Type-C
Temperature sensor: Yes
Clock: Integrated, precision
Integrated FP Libraries: Yes
GPIO pins: 29, only 20 accessible via pin header , the rest just tinned
Pins: 2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels
Programmable I/O (PIO) state machines: 8
RGB LED: WS2812, addressable
Dimensions mm: 23.5 x 18mm
Pinout:
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
