Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
QC3.0 module, dual USB, Type-C, MicroUSB, 3.7V to QC3.0 5V, 9V, 12V, 18W
It allows for the rapid creation of a portable Li-Ion 3.7V battery with up to 18W charging and discharging, supporting QC3.0 and USB PD for 5V, 9V or 12V power supply. It offers four interfaces, 2x USB-A, bidirectional USB-C and MicroUSB for input, with automatic device detection and conversion efficiency of up to 95%, compatible with Apple, Samsung and BC1.2.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
IP5328P Powerbank module for Lithium Ion batteries that allows the creation of a portable battery with support for multiple fast charging protocols.
Bidirectional charging is fast at up to 18W and features a total of four charging interfaces: two USB-A interfaces, one USB-C interface, and one Micro USB interface.
The MicroUSB port is for input only and can use the QC protocol. The Type-C port is bidirectional, meaning it can be used for both charging and discharging.
It features extensive compatibility with Apple, Samsung and BC1.2 protocols and a conversion efficiency of up to 95%, guaranteeing reliable and efficient charging for most devices. The automatic detection function upon insertion of the phone simplifies the charging process.
The module has the function of low battery lock and activation. When the battery is first connected to the IP5328P, regardless of the battery voltage, the chip is locked. In the non-charging state, if the battery voltage is too low, the IP5328P will also enter the lock state. In this state, the IP5328P has no phone detection function and cannot be activated by pressing a button. Please charge the battery to activate the chip.
IP5328P has a constant current, constant voltage lithium battery charging management system, which supports a synchronous switching structure. When the battery voltage is lower than 3V, it uses 250mA charging. When the battery voltage is higher than 3V, it enters constant current input charging, with a maximum charging current of 5.0A. IP5328P adopts switching charging technology with a switching frequency of 500kHz. Normal charging at 5V has a maximum input power of 10W. When fast charging, the maximum input power is 18W.
Boost: IP5328P integrates a synchronous conversion system with high voltage output support, with a wide output range from 5V~12V. The boost system automatically adjusts the output current according to temperature, ensuring that the IC temperature remains below the set temperature.
Multiple cells can be connected in parallel (same cell type). The higher the capacity, the longer the charging and discharging time. Add a protection board for safety; the motherboard has positive and negative poles. Reversing the battery connection will damage the motherboard, risking burning it!
Specifications:
Supply voltage: 3.7VDC, Lithium Battery up to 4.2VDC
Output voltage: 5 - 12VDC, only via charging protocol
Output Interfaces: 2x USB-A, 1x USB-C
Input Interfaces: 1x Micro USB, 1x USB-C
Battery Type: 3.7V (any number of cells can be connected in parallel)
Charging Protocols: QC3.0, FCP, AFC, MTK, SFCP, USB PD
Conversion Efficiency: Up to 95%.
Additional functions: Automatic detection when inserting the phone, adaptive charging depending on temperature
Dimensions mm: 65 x 32.5mm
Login:
- Technology
- Lithium Ion
- Load voltage
- 4.2VDC
- Number of cells
- 1S
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
