MPPT 5A CC/CV solar charge control module with display

Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.

The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.

The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.

MPPT solar charge control module, 5A, CC/CV, with display, 6-36V

MPPT DC-DC step-down controller for correct solar charging of batteries, with CC/CV mode for constant voltage and current, separate settings for V, A and MPPT, dual display with switching for voltage, current and power, supports 6-36V input and current up to 5A, high efficiency up to 95%, ideal for lithium batteries, power LEDs and electronic projects.

14.51 € Tax included

11.99 € Tax excluded

(5/5) out of 3 total ratings
Read the reviews

1-2 zile

This product has a warranty of 2 years.

INTERNATIONAL DELIVERY
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.

FAST DISPATCH 24H
We ship from our stock within 24H

LOYALTY POINTS
You earn points with every order, worth 5%.

Solar charging module, 5A, constant current and voltage, MPPT type. It is used together with solar panels and batteries for their correct charging. This module is set by adjustment to the voltage required by the batteries for charging and has an efficiency of 95%.

This module is a DC-DC step-down controller with MPPT function, digital display and constant voltage and current regulation. The module is designed for use with solar panels, DC sources or batteries, making it ideal for charging lithium batteries, powering power LEDs or electronic projects.

It has a double display for reading electrical parameters, a button for switching the displayed information, separate potentiometers for adjusting voltage, current and MPPT point, as well as status LEDs for operation and charging.

Specifications:

Supply voltage: 6 - 36VDC

Output voltage: 1.25 - 32VDC, continuously adjustable

Type: Voltage reducer

Output current: 0.05 - 5Ah

Efficiency: 95%

Operating frequency: 180 Khz

Short circuit protection: Yes

Temperature protection: Yes

Reverse polarity protection: No

The output must be connected to the battery plus the blocking diode, the anti-reverse irrigation module, otherwise the module will burn out! The diode is mounted with the cathode towards the battery to protect the module from reverse voltage, from the battery to the module.

Display: input voltage, output voltage, output current, output power

Status indicator: Yes, red charging, green charged

Dimensions mm: 60 x 31 x 22 (without display)

Use:

First connect the power supply or solar panel to the input terminals respecting the polarity. Without connecting the consumer, adjust the desired output voltage from the voltage potentiometer until the displayed value is the required one. Then set the constant current using the current potentiometer, preferably with an ammeter for accuracy.

If used with a solar panel, adjust the MPPT potentiometer until the maximum output current is obtained, possibly partially covering the panel for fine adjustment. Finally, connect the battery or consumer to the output terminals. The module will maintain the set voltage and current and will automatically optimize the power taken from the solar panel.

The MPPT potentiometer adjusts the maximum power point of the solar panel.

Module component	Role and description
Plus and minus input	Input terminals where the solar panel or DC power source is connected
Plus and minus output	Output terminals to battery, LED or other consumer
Digital display	Displays input voltage, output voltage, output current or power depending on the selected mode
Display toggle button	Allows switching between displaying input voltage, output voltage, current or power
LED input voltage display	Lights up when input voltage is selected on the display
Power LED	Indicates that the module is powered and working.
Voltage potentiometer	Adjusts the output voltage value
Constant current potentiometer	Adjusts the maximum output current limit
MPPT potentiometer	Adjusts the maximum power point of the solar panel for optimal efficiency
Rotating lamp indicator light	Indicates the charging status according to the current delivered