Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
LCR tester TC1, color display, with IR decoder, 3.7V
Multifunctional tester for quick identification and measurement of electronic components, automatically detects transistors, diodes, resistors, capacitors and MOSFETs, clearly displays type, schematic and value on the color TFT screen, includes IR decoder with waveform display for remote controls, has self-calibration, USB charging and automatic shutdown, powered by internal 3.7V.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Multitester with color TFT LCD display for NPN/PNP transistors, capacitors, resistors, diodes, triodes, N and P channel MOSFETs, IGBT, JFET, triac, etc...
NEVER MEASURE CHARGED CAPACITORS! MAKE SURE THEY ARE DOWNLOADED BEFORE MEASURING.
We do not recommend measuring batteries with the tester, although it is capable of measuring a lithium cell up to 4.3V.
It has an infrared receiver for capturing, decoding and displaying the waveform of IR commands (remote controls, etc.).
It detects zener diodes and has a self-calibration function.
It has a USB port for charging, is easy to use with a single button for all operations, automatically detects the tested element, and has a standard automatic shutdown function. It uses a 3.7V, 400mAh internal lithium battery. It is connected via a 2-pin XH2.54 plug.
Use:
Insert the pins of the component to be measured in the designated area and secure the support by operating the lever, press the button and the tester will automatically display the relative information of the component (type, scheme and value).
For IR reading and decoding, point the remote control at the tester, and if it detects the infrared signal, it will decode it and display it on the screen.
Specifications:
Power supply: internal lithium battery 3.7V
Battery included: Yes
Battery capacity: 400mAh
Charging voltage: 5VDC through the USB port
Auto calibration: Yes
IR decoder: Yes, with waveform display and instructions
Display: Color TFT LCD display, 160x128 pixels
Automatic shutdown function: Yes, settable
Beach values:
Zener diode: 0.01 - 30V
Diodes: <4.5V
Transistors: 0.01 - 4.5V
Triac: IGT < 6mA
Capacitors: 25pF - 100mF
Resistors: 0.01 - 50M Ohms
Inductors: 0.01mH - 20H
Batteries: (0.1 - 4.5V ( We do not recommend testing batteries)
Dimensions mm: 88 80 x 28mm
Weight: 112g
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (2) - Review moderation
Atunci când nu (mai) suntem siguri despre natura și caracteristicile componentelor electronice din cutiile noastre, acest simpatic dispozitiv ne vine în ajutor.
Acest produs confirma specificatiile. Multumesc serviciul de asist tehnica pt operativitatea cu care a rezolvat problemele pt un alt produs.
