Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
IR obstacle sensor, 3.3-5V
The IR obstacle avoidance module, ideal for Arduino and other boards, detects the proximity of objects and provides a digital signal on the OUT pin, confirmed by the LED on the board. It operates at 3.3-5V, has an adjustable distance via potentiometer up to 20 cm and a detection angle of 35 degrees, suitable for robots, automation and proximity projects.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
IR sensor (infrared) obstacle avoidance, compatible with Arduino and other development boards.
The sensor emits a digital signal on the OUT pin when it is triggered (close to the object). This is also signaled by the LED present on the board.
To adjust the sensitivity (distance to the obstacle) turn the dedicated potentiometer (caution, it has a limited stroke). The potentiometer is quite imprecise but, once the preferred position is found, the results will be quite consistent. Because of the potentiometer, it is possible that, for detection at greater distances, more time is needed to find its optimal position. We recommend adjusting the LEDs in a parallel position to each other.
Specifications:
Voltage: 3.3-5V
Distance: 0 - 20cm adjustable by potentiometer
Detection angle: 35 degrees
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (7) - Review moderation
Sunt senzori la care influenteaza pozitia fata de orizontala, transmite informatii false. Trebuie corelata cu reglarea potentiometrului.
Un senzori bun
Ok
Buna ziua sint foarte multumit
Ok
