IoT Development Boards, Wireless

Ultra-compact IoT solution for portable projects and smart home, offering modern connectivity with Wi-Fi 6, Bluetooth 5, Zigbee 3.0, and Matter for interoperable integration. Based on the ESP32-C6 with a RISC-V processor up to 160 MHz and 4MB Flash, it includes USB-C and UART, I2C, SPI interfaces for quick connection to sensors and modules, plus integrated charging for Li-Po batteries.

Compact solution for IoT projects, robotics, and interactive light effects, with ESP32-S3 dual-core 240 MHz and Wi-Fi plus Bluetooth 5 LE Mesh connectivity. It integrates an 8x8 RGB matrix with addressable WS2812 LEDs for animations and displays, a 6-DOF QMI8658 IMU for motion and orientation detection, easy power supply and programming via USB-C, extendable through Dout pin and 17 multifunctional GPIOs.

DIN module for automating equipment with remote control, simultaneously controls up to 8 IR devices through independent channels and quickly learns codes with the built-in IR receiver. It integrates automatically into Home Assistant via MQTT, offers stable connectivity via WiFi or Ethernet, and is powered directly at 9-24 VDC, with USB-C for programming and backup.

Compact solution for voice assistant projects with display, based on ESP32-S3, offers Wi-Fi and Bluetooth for quick integration into smart home and prototypes, includes ES8311 audio codec with integrated microphone and speaker output, displays the conversation and status on a 1.54-inch color LCD screen, supports switching between AI models such as Qwen, DeepSeek, and Doubao via xiaozhi.me, and is easy to program via USB-C.

Compact solution for projects with AI voice assistant and display, based on a dual-core ESP32-S3 at 240 MHz with 16MB Flash and 8MB PSRAM for fast response. Includes a 1.54" LCD, integrated microphone, and ES8311 audio codec for natural conversations with an external speaker. Offers 2.4 GHz Wi-Fi and Bluetooth 5 LE, and can be easily programmed via USB-C in Arduino IDE, ESP-IDF, or MicroPython.

Compact WiFi module with ESP8285H16 that adds remote control and real-time monitoring to Sinilink programmable power supplies, mounts directly on the board via a dedicated connector, communicates via 3.3V UART with a ModBUS bridge for commands and telemetry, operates at 3.3-5V with internal regulation, and supports advanced integration through alternative firmware such as ESPHome or Tasmota.

Development board with ESP32-S3 and a 2.8-inch round capacitive touchscreen, 480x480, ideal for HMI interfaces, dashboard panels, and IoT projects with a compact display. It offers 2.4GHz WiFi and Bluetooth 5, generous 16MB Flash and 8MB PSRAM for smooth graphics with LVGL, includes microSD, RTC, and a 6-axis IMU sensor, and supports easy programming via USB-C.