Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
E-Paper Screen, E-Ink, 2.13", SPI, 3.3-5V, Black
2.13 inch E-Ink display for Arduino, STM32, Raspberry Pi and other board projects, ideal for paper-like display with very low consumption. 296x128 resolution for clear text and icons, good visibility in bright light with 170 degree viewing angle, SPI interface for quick connection, image remains displayed even without power.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
E-INK display compatible with Arduino, STM32, Raspberry and other development boards.
This screen does not require backlighting and is the closest display to imitating printed paper. It offers a resolution of 296*128 pixels, a viewing angle of 170 degrees and a connection interface through SPI.
In order to be read, it requires ambient lighting. The display can be read without problems in strong lighting conditions.
CAREFUL! The screen does not tolerate intense UV light. Avoid exposing it directly to sunlight! It is recommended to refresh the screen at least 180 seconds to avoid the Burn-in effect. Use the "Sleep" function when the screen is not used to avoid the screen burning due to the voltage present for a long period of time. The image remains displayed even if the display remains without power.
The fact that it does not generate light makes it one of the most efficient types of screens in terms of power consumption.
The contrast can be adjusted by correcting the VCOM value in the program. Increasing the contrast can increase the "afterimage" effect.
Specifications:
Supply voltage: 3.3 - 5VDC
Logic voltage: 3.3 - 5VDC
Screen size: 2.13 Inch
Screen type: E-Ink
Lighting: Ambient
Pixels: 296x128
viewing angle: 170 degrees
Pixel color: Black-White
Gray level: 2
Communication: 4-wire SPI - 3-wire SPI, selectable via switch BS1
Partial refresh rate: 0.3s (there is an undefined margin of error)
Total refresh rate: 2s (there is an undefined margin of error)
Power consumed in refresh: 26.4mW
Consumption in Sleep: 0.01uA
Dimensions mm: 71.6 x 38.3
Pins:
VDC: 3.3-5VDC
GND: GND
FROM: SPI-MOSI
CLK: SPI-SCK
CS: SPI chip select pin
DC: Control Data/Command: High Level means Data, Low Level means Command
RST: External reset
BUSY: Busy state output (High Level indicates Busy state)
Package Contents:
1 x Display
1 x Acrylic board
1 x Set of plastic spacers
1 x Pin bar set
1 x Plastic box
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
