Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Dual QC3.0 module, 6-32V at 5V3.4A, 9V2.5A, 12V2A, 24W
QC3.0 fast charging module with two USB outputs, ideal for powering and charging devices in cars, DIY projects or industrial equipment. Accepts 6-30VDC and provides up to 24W, with automatic 3-12V output depending on protocol, 90-97% efficiency and overvoltage, overcurrent, short circuit and temperature protections. Power supply via IN pads or 5.5x2.5mm.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
QC3.0 fast charging module, with two USB outputs for charging various electronic devices.
The output voltage is automatically adjusted between 3 and 12VDC depending on the protocol detected for Fast Charge (standard 5V).
Specifications:
Supply voltage: 6 - 30VDC
Output: 5V/3.4A, 9V/2.5A, 12V/2A
Maximum power: 24W
Conversion efficiency: 90 - 97%
Input overvoltage protection: Yes
Input overcurrent protection: Yes
Output current protection: Yes
Short circuit protection: Yes
Temperature protection: Yes
Power supply: IN+ and IN- plugs or 5.5x2.1mm male connector
Dimensions mm: 40 x 50mm
Supported protocols:
DCP protocol, BC1.2, Apple, Samsung protocol
Huawei Fast Charge Protocol FCP/SCP
Huawei Fast Charge Protocol AFC
Spreadtrum Fast Charge Protocol SFCP
Qualcomm QC2.0 and 3.0
MTK PE1.1/PE2.0
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
Reviews (7) - Review moderation
E ce trebuie, am cumparat mai multe si le folosesc prin rotatie in fiecare zi de jumatate de an !
Foarte multumit, exact ce imi trebuia. Incarca rapid (fast charge)
Incarca
Desi nu scrie clar daca poate 24W pe ambele iesiri impreuna sau cate 24W/iesire , am testat cu succes 5V/3A si 5V/1A deodata. Cu 3A tensiunea nu prea scade sub 4.95V dar din ceva motiv un rasbery pi 4 refuza sa functioneze (se tot resetreaza, cu un adaptor classic din priza merge).
Desi nu scrie clar daca poate 24W pe ambele iesiri impreuna sau cate 24W/iesire , am testat cu succes 5V/3A si 5V/1A deodata. Cu 3A tensiunea nu prea scade sub 4.95V dar din ceva motiv un rasbery pi 4 refuza sa functioneze (se tot resetreaza, cu un adaptor classic din priza merge).
