Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
DC motor, JGB37-520, 7RPM, 12V
Brushed DC motor with integrated metal gear, ideal for actuators and automations that require slow and controlled movement. Operates at 12V and delivers 7 RPM with stable torque, metal gears provide durability and efficient power transmission. Suitable for robots, small conveyors and industrial projects where reliability matters.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Brushed DC motor, JGB37-520, with integrated metal gearbox, designed for applications that require low rotational speed and high torque.
It operates at 12VDC and provides an unloaded speed of approximately 7 RPM, making it suitable for actuating mechanisms, automated systems, robots, small conveyors, or other projects where slow and controlled movement is required. The metal gear reducer ensures consistent operation, increased durability, mechanical stability, and efficient torque transmission, even under load.
Specifications:
Type: JGB37-520 motor
Power supply: 12VDC
Gear ratio: 810:1
No-load speed: 7 RPM
Rated load speed: 5 RPM
Rated torque: 22 kg.cm
Maximum allowable torque: 25 kg.cm
No-load current: from 120 mA
Rated load current: from 400 mA
Shaft diameter: 6 mm
Shaft length: 15.5 mm
Motor base diameter: 33 mm
Gearbox diameter: 37 mm
Gearbox length: 29 mm
Usage:
The motor is powered at 12VDC, observing the correct polarity. It is recommended to use a motor driver or a suitable controller for start, stop, and direction control. The power supply must support the current peaks at startup and under heavy load, so a margin above the rated current is recommended. The motor is intended for applications requiring low speed combined with high torque, reliability, and mechanical strength. Do not exceed the maximum allowable torque and avoid prolonged shaft stall to prevent damage to the gears.
Dimensions:
L corresponds to the length in mm depending on the gear ratio.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
