Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Current to voltage converter module, 0-20mA to 0-10V
Converts 0-20mA or 4-20mA current signal into selectable 0-3.3V, 0-5V or 0-10V voltage, ideal for industrial sensors and integration with Arduino or STM. Offers stable transmission over long distances, high-precision sampling resistor with low drift, fine calibration via ZERO and SPAN potentiometers, wide 7-36V power supply and reverse polarity protection.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
Current-voltage conversion module, designed to convert the current signal of 0-20mA or 4-20mA into a variable voltage signal between 0-3.3V, 0-5V or 0-10V.
This module is compatible with Arduino and STM platforms, offering a practical and reliable solution for transmitting signals over long distances, without significant signal loss, because current signals are less susceptible to intensity loss compared to voltage signals, when trying to transmit signals over longer distances.
The module uses a high-precision sampling resistor, with reduced thermal derivation and excellent stability, and has potentiometers for automatic adjustment of zero and maximum range, for a precise calibration of the signal.
Specifications:
Supply voltage: 7-36V (minimum 12V for 10V output)
Current input range: 0-20mA / 4-20mA
Voltage output range: 0-3.3V / 0-5V / 0-10V
Operating temperature: -40°C to +85°C
Sampling component: High precision resistor, derivation ≤ 1% at 30ppm
Protection: Polarity reversal protection
Use:
Connect the module to a voltage source between 7-36V. If the desired output is 10V, the power supply must be at least 12V.
To set the output to minimum, adjust the ZERO potentiometer, and to set the maximum range, adjust the SPAN potentiometer, turning it clockwise to increase the value.
After connection and power, the D2 LED should light up. If not, check the connections to avoid possible errors.
Use the jumpers to configure the desired output range according to the project specifications: The available ranges are 0-3.3V, 0-5V and 0-10V, with different configurations for jumpers J1 and J2, as follows.
Jumper configuration:
Range 0-2.5V:
J1: connected
J2: connected
Range 0-3.3V:
J1: disconnected
J2: connected
Range 0-5V:
J1: connected
J2: disconnected
Range 0-10V:
J1: disconnected
J2: disconnected
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
