Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Cable with JST XH2.54 connector, 4 pins, 20 cm
Ideal for quick and detachable connections in electronic projects, for development boards, sensors, or LED strips with JST-XH. It has 4 pins at a 2.54 mm pitch, a 20 cm cable for easy mounting in cases and test stands, 30 AWG copper contacts for reduced losses, a durable PA66 housing, and a clip fastening for secure attachment.
Shipping by Thursday 27 August
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
This cable with a JST XH2.54 connector is designed for secure, detachable connections in electronic projects, making it suitable for interconnecting development boards, sensors, LED strips, and other modules that use connectors with a 2.54mm. pitch.
This version has 4 pins and a cable length of 20 cm, enough for internal wiring in enclosures, mounting boxes, or test stands. The housing is made of nylon 66 (PA66), a mechanically and thermally resistant material, and the pins ensure stable electrical contact and low contact resistance. The conductors are made of copper, with a 30 AWG cross-section, and the assembly supports a maximum current of 3A and a maximum voltage of 250 VDC/VAC, with an operating temperature range between -40 and 85°C.
The female terminal mates with any 4-position JST-XH header mounted on the board, and the latch locking system prevents accidental disconnection due to vibrations or repeated handling. It is compatible with Arduino boards (UNO, Nano, Mega), ESP32, ESP8266, STM32, Raspberry Pi Pico, and most modules and sensors that use standard JST-XH connectors.
Specifications:
Connector series: XH2.54 (JST-XH compatible)
Pitch: 2.54 mm (0.1 inch)
Number of pins: 4
Connector type: Female
Conductor cross-section: 30 AWG (approximately 0.05 mm²)
Conductor material: Copper
Maximum voltage: 250 VDC/VAC
Maximum current: 3A
Housing material: Nylon 66 (PA66)
Pin material: Brass
Operating temperature: -40 ~ 85°C
Terminal dimensions: 7.5 x 12.5 x 6 mm
Cable length: 20 cm
Warning: although the connector is certified for a maximum voltage of 250 VDC/VAC, the reduced conductor cross-section (30 AWG) and insulation level make it suitable for low-voltage, signal, and DC power circuits. Do not use this cable for 220 VAC mains connections, where appropriately sized conductors and connectors approved for electrical installations are mandatory.
Contents:
1x Cable with connectors
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
