Product images are for informational purposes only and may vary slightly depending on the batch and supplier. Product specifications and prices may be subject to change without notice. We do our best to provide accurate and complete product specifications, but they may not be completely accurate. If you encounter any such situation, please let us know.
The product is intended for specialists and requires qualified and authorized personnel. The product does not include assembly/use instructions . Putting the product into operation by unqualified persons leads to the loss of the warranty according to the Terms and Conditions on the site.
The specified technical parameters (current, power, etc.) represent maximum allowable values under ideal operating conditions. For safe use and optimal lifespan, it is recommended to operate the product continuously at no more than 50% of the specified maximum values.
Button cover 12x12x7.3, Green
PCB button cap, compatible with 12x12x7.3 tactile switches, ideal for quick identification and convenient operation in electronic projects. Made of durable plastic, provides stable fixation on the button and a firm press. Green color improves visibility on the panel or board, suitable for prototypes and industrial equipment.
Shipping by Thursday 22 October
Buying this product earns you 0.02 RON in loyalty points.
International fast shipping within EU. Free Shipping for orders above 100 EUR in most EU countries.
We ship from our stock within 24H
You earn points with every order, worth 5%.
The round cap for tactile button is a plastic accessory, green in color, intended for tactile switches with a 12 x 12 mm body and a height of 7.3 mm. It mounts on the square stem of the button and replaces its small tip with a rounder, wider, and more comfortable pressing surface, suitable for control panels, laboratory equipment, DIY projects, and prototypes.
The 12x12x7.3 model corresponds to tactile buttons with four pins, for PCB mounting, from the common 12 x 12 mm family. The cap has a round shape, with a wider rim at the base, and the green color helps quickly distinguish panel functions, such as power, confirm, or active status.
Among the main features are the round plastic body, green color, flat top surface for pressing, and attachment by simply pushing it onto the button stem, without tools and without adhesive. The product is passive and does not require power.
The cap is a mechanical accessory, so it has no electrical interface. It is suitable for tactile buttons used together with Arduino, ESP32, STM32, Raspberry Pi, PLCs, or other circuits, as long as the button stem has the same shape and dimensions.
Specifications:
Type: Round cap for tactile button
Model: 12x12x7.3
Material: Plastic
Color: Green
Dimensions: 13 x 8 mm (diameter x height)
Use:
Before installation, check that the tactile button has a 12 x 12 mm body and a height of 7.3 mm, and that the stem has a square cross-section.
Fit the cap over the top of the button stem so that the inner hole is aligned with the shape of the stem.
Press the cap gently onto the stem until it sits fully on the tactile button.
Do not force the installation and do not press on the cap before aligning it correctly, so as not to damage the stem or the button contacts.
To remove it, pull the cap straight upward, without twisting it and without bending the button stem.
For a uniform panel appearance, use caps of the same height on all buttons and choose different colors for different functions.
Produs destinat utilizarii in proiecte electronice, automatizari, prototipare, educatie si cercetare.
Produsul trebuie utilizat numai conform specificatiilor tehnice mentionate in descriere si/sau in documentatia produsului.
Avertismente generale de siguranta:
Nu utilizati produsul la tensiuni, curenti sau temperaturi peste valorile specificate.
Montajul si conectarea trebuie realizate de persoane cu cunostinte tehnice minime in domeniul electric/electronic.
Evitati scurtcircuitele, inversarea polaritatii si conectarea gresita a alimentarii.
Nu lasati produsul alimentat nesupravegheat in timpul testelor.
Produsul nu este jucarie si nu este destinat copiilor.
Pentru modulele electronice, se recomanda utilizarea in carcase, panouri sau montaje protejate, dupa caz.
Identificare produs:
Denumirea produsului, codul/SKU-ul si caracteristicile tehnice sunt mentionate in pagina produsului si/sau pe eticheta ambalajului.
Producator / Importator / Distribuitor:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Website: www.sigmanortec.ro
Persoana responsabila in UE:
Sigmanortec S.R.L.
Calea Bucuresti nr. 9, Targu Jiu, Gorj, Romania
E-mail: [email protected]
Documentatie si siguranta:
Pentru informatii suplimentare, fise tehnice, declaratii de conformitate sau instructiuni, ne puteti contacta la [email protected].
